與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

意見回饋

DPO7000+DPO70000+DSA70000+VM6000: How do I enable the VGA port to view the scope display on an external monitor?

問題:

DPO7000+DPO70000+DSA70000+VM6000: How do I enable the VGA port to view the scope display on an external monitor?

答案:

Here is the process to enable the DPO7000 scope display(VGA port)on an external monitor/projector:

  1. Connect the monitor to the SCOPE ONLY VGA port with the scope turned off.
  2. Power on the monitor.
  3. Power on the scope. The external monitor display should have the scope display after the scope boots.
  4. If the scope display is not shown on the monitor, minimize the scope application.
  5. Right-click on the Desktop and select Properties
  6. Go to Settings and click on the Advanced tab (the resulting window should look similar to the one below)
  7. In Displays section make sure Monitor and Panel are setup the same as the screenshot below.

Screenshot


此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 55431

檢視所有常見問答集 »