Why is the cable used in the HDMI Sink Intra-pair skew measurement?
In the Sink Intra-pair skew measurement set up diagram, a cable is used for connecting the HDMI-TPA-R-TDR and DUT. This is not mandatory. You can connect the TPA-P-TDR test fixture instead of the TPA-R-TDR and connect the TPA-P-TDR directly to the DUT. For some sink device the accessibility of the HDMI port using the TPA-P-TDR is not possible, in those cases you can use the cable to connect the TPA-R-TDR and DUT.
常見問答集 ID 60281