下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?

問題:

While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?

答案:

  1. Highlight state 1 in the Overview section of the trigger window. The Overview section is at the left section of the Trigger window.
  2. Right click on State 1 and "add state". New state is now after State 1.
  3. Right click on State 1 again and "cut state". New state is now in 1st position and original State 1 is cut out.
  4. Right click on State 1 again and "paste state". The new state is now before the original State 1.

此常見問答集適用於:

產品系列: TLA7000 TLA7000 TLA7000

產品:

常見問答集 ID 58996

檢視所有常見問答集 »