What is the recommended equipment for HDMI cable testing per CTS v1.3a?
Recommended Test Equipment for HDMI Compliance Testing per CTS (Compliance Test Specification) V1.3a
HDMI Cable Test
|Oscilloscope||DSA70804 or DPO70804 with Opt 2XL||1|
|Other supported oscilloscopes 1,2||DSA71254, DSA71604, DSA72004, DPO71254 with opt 2XL, DPO71604 with Opt 2XL, DPO72004 with Opt 2XL, TDS6804B, TDS6124C and TDS6154C||1|
|Software||TDSHT3 - HDMI compliance software (support for CTS V1.3a requires software Version 3.3.0 or higher)||1|
|Probes||P7313SMA differential SMA probe - use for all differential and single-ended measurements||Minimum 2|
|TDRsystem||DSA8200 with (1) 80E03 and (1) 80E04 module (for Cable Inter-pair Skew and Far-End Crosstalk tests)||1 set|
|Test Fixtures||TPA-P TPA-R and EDID fixtures from Efficere Technologies. Order a set as ET-HDMI-TPA-S||1 set|
|Modules||DTG5334 with 3 DTGM30 modules||1 set|
Transition Time Converters from Picosecond Pulse Labs
TTC hardware filters for cable test will not be required as TDSHT3 provides the software TTC filters.
|Minimum 2 sets|
|Interface||NI-GPIB-USB - A/B/HS with Driver Software from National Instruments. Type B/HS is recommended for use with DPO/DSA70000 series scopes.||1|
1 Oscilloscopes with bandwidth less than 8 GHz will only support HDMI testing at limited resolution and clock/data rates.
2 16M per channel or greater record length is required for HDMI Compliance
常見問答集 ID 53536檢視所有常見問答集 »