與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

意見回饋

What is the difference between isolation and crosstalk?

問題:

What is the difference between isolation and crosstalk?

答案:

Channel crosstalk is interference caused by an unwanted signal from one channel being either coupled (typically capacitively coupled) or radiated into another channel. Crosstalk is typically measured in dB down (from the signal level in the interfering channel) at a specified frequency with a specified load on the interfered-with channel.

Isolation is a measure of channel resistance to leakage from one part of a circuit to another, such as through a supposedly open solid-state switch or as resistively coupled crosstalk. Isolation is often specified in Ohms. Crosstalk and isolation are often given as a bank and channel specification on relay scanning cards. Differential- and common-mode isolation specifications are also included with many relay scanning cards.


此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 70641

檢視所有常見問答集 »