下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

On the TDS1000 and TDS2000 series scopes+ where is the Trigger Point when the Pulse Width Trigger is used and a specified amount of time is selected?

問題:

On the TDS1000 and TDS2000 series scopes+ where is the Trigger Point when the Pulse Width Trigger is used and a specified amount of time is selected?

答案:

Equal: Oscilloscope triggers when trailing edge of the pulse crosses the trigger level.

Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the pulse width.

Less than: The trigger point is the trailing edge.

Greater than: (also called time-out trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the pulse width.

此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 62076

檢視所有常見問答集 »