下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

Speed: How do I change the soak time for a measurement?

問題:

Speed: How do I change the soak time for a measurement?

答案:

For each measurement, a Source-Delay-Measure (SDM) sequence is executed. This implies that the output value is set (Source), the device under test is allowed to settle (Delay), and the measurement is taken (Measure). To give the device more time to settle or soak before the measurement is taken, simply change the source delay value. To change it with the front panel controls, press CONFIG I-SOURCE (or V-SOURCE) DELAY, then enter the value. Use the 'SOUR:DEL' command to accomplish the same thing over the bus.

此常見問答集適用於:

產品系列: 2400 系列 SMU

產品:

常見問答集 ID 70891

檢視所有常見問答集 »