Question:
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
Answer:
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the Filter type. This video example will demonstrate how to save a screen capture with a few commands and tools using Python as the programming language. The same commands from the programmers manual can be used in MATLAB, Labvie, C, and many other languages. It's important to have a method either through a module, DLL or such to talk to the VISA.
More information about what a VISA is can be found here -> VISA INFO.
NOTE: Below is a Download link for all the Python code found in the video
This FAQ Applies to:
Product Series: DPO7000, MSO/DPO70000, MSO2000B / DPO2000B, MSO3000 / DPO3000, MSO4000 / DPO4000, MSO5000 / DPO5000, TDS2000C, TDS3000, TPS2000, MDO3000, MDO4000
Product: DPO2002, DPO2012, DPO2014, DPO2024, DPO3012, DPO3014, DPO3032, DPO3034, DPO3052, DPO3054, DPO4014B, DPO4032, DPO4034, DPO4034B, DPO4054, DPO4054B, DPO4102B, DPO4102B-L, DPO4104, DPO4104B, DPO4104B-L, MSO2002, MSO2002B, MSO2004B, MSO2012, MSO2012B, MSO2014, MSO2014B, MSO2022B, MSO2024, MSO2024B, MSO3012, MSO3014, MSO3032, MSO3034, MSO3054, MSO4014B, MSO4032, MSO4034, MSO4034B, MSO4054, MSO4054B, MSO4102B, MSO4102B-L, MSO4104, MSO4104B, MSO4104B-L, MSO5034, MSO5054, MSO5104, MSO5204, MSO70404, MSO70404C, MSO70604, MSO70604C, MSO70804, MSO70804C, MSO71254, MSO71254C, MSO71604, MSO71604C, MSO72004, MDO3012, MDO3014, MDO3022, MDO3024, MDO3032, MDO3034, MDO3052, MDO3054, MDO3102, MDO3104, MDO4014-3, MDO4014B-3, MDO4024C, MDO4034-3, MDO4034B-3, MDO4034C, MDO4054-3, MDO4054-6, MDO4054B-3, MDO4054B-6, MDO4054C, MDO4104-3, MDO4104-6, MDO4104B-3, MDO4104B-6, MDO4104C
FAQ ID : 64791
View all FAQs »