與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電 1-800-833-9200

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

Now that the Jitter+ Noise and Ber Analysis software (JNB ) provides TDR/T and S-parameter channel emulation and IConnect V 4.5 provides some equalization capability there is some overlap between the two applications tools which run on the sampling scopes. Please provide clarification on the differences?

問題:

Now that the Jitter+ Noise and Ber Analysis software (JNB ) provides TDR/T and S-parameter channel emulation and IConnect V 4.5 provides some equalization capability there is some overlap between the two applications tools which run on the sampling scopes. Please provide clarification on the differences?

答案:

The following table defines the differences:

 
 Jitter, Noise, BERIConnect
FocusTx / SystemCable, Backplane, system
Signal sourceTxTDR
ApplicationSerial  link characterizationCable, backplane, connector, package
Active/passive device focusActive, TxPassive, interconnect
Typical measurementsJitter, noiseImpedance, S-parameters
BERDDJ and eye
Additional capabilitySingle S-parameter blockMultiple S-parameter blocks
FFE, DFE EqualizationPre-/de-emphasis
Emphasis, FIR filters 
Fixture de-embeddingFixture de-embedding
Channel emulationMultiple S-parameter simulation
FIR filtersSpice modeling

此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 62056

檢視所有常見問答集 »