下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

I've connected the probe to the probe adjust signal but all I get is a flat line+ no signal+ or a sharp spike with no square wave. Why?

問題:

I've connected the probe to the probe adjust signal but all I get is a flat line+ no signal+ or a sharp spike with no square wave. Why?

答案:

If you are using the retractable hook tip on the end of the probe, try pressing the tip on very hard. A design change was made to the retractable hook tip to keep it from coming off easily, but this also makes it more difficult to press on securely. Once the retractable hook tip is securely pressed into place, the probe should work properly.

此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 60856

檢視所有常見問答集 »