下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?

問題:

I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?

答案:

The Test Connection button pings the Gateway. If the Gateway IP Address is not specified, or specified incorrectly, the Test Connection will fail. This applies whether you are using a crossover cable or a "real" Ethernet connection. The selection is not required to communicate with the scope, it is strictly that the Test Connection button, which pings the gateway, will work.


此常見問答集適用於:

產品系列: TDS3000

產品:

常見問答集 ID 55806

檢視所有常見問答集 »