I have connectorless compression probes (P6860+ P6880+ P6419) and need to connect to the Mictor on board. Is there an adapter to do this?

Question:

I have connectorless compression probes (P6860+ P6880+ P6419) and need to connect to the Mictor on board. Is there an adapter to do this?

Answer:

The NEX-HDSWIZ2 is used when there is a Mictor connector on a target that must be connected to Tektronix P6860, P6880 or P6419 compression probe(s). In addition to making this connection, the adapter also provides the ability to rewire the pinout from the Mictor to the Tektronix compression probe.
Please visit Nexus for details.

This FAQ Applies to:

Product Series: TLA7000, TLA7000, TLA7000

Product: TLA704, TLA711, TLA714, TLA721, TLA601, TLA602, TLA603, TLA604, TLA611, TLA612, TLA613, TLA614, TLA621, TLA622, TLA623, TLA624, TLA7Q4, TLA7AB4, TLA7N1, TLA7N2, TLA7N3, TLA7N4, TLA7P2, TLA7P4, TLA7Q2, TLA7AA1, TLA7AA2, TLA7AA3, TLA7AA4, TLA7AB2, P6860, P6880, TLA7L1, TLA7L2, TLA7L3, TLA7L4, TLA7M1, TLA7M2, TLA7M3, TLA7M4, P6419, TLA5201, TLA5202, TLA5203, TLA5204, TLA7NA1, TLA7NA2, TLA7NA3, TLA7NA4, TLA7012, TLA7016

FAQ ID : 55811

View all FAQs »
與我們聯絡
與我們聯絡
提出問題

與 Tek 業務代表即時對談。 Available 8:30 AM – 5:30 PM
下載
下載

下載手冊、產品規格表、軟體等等：

Go to top