下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

I am trying to get my TG700 to be controlled from the LAN. Appendix C of your user manual suggests checking remote command operation by connecting to the unit with telnet. When I do that+ I am challenged for a VxWorks login and password. What is the default username/password to telnet to the TG700?

問題:

I am trying to get my TG700 to be controlled from the LAN. Appendix C of your user manual suggests checking remote command operation by connecting to the unit with telnet. When I do that+ I am challenged for a VxWorks login and password. What is the default username/password to telnet to the TG700?

答案:

A request for password indicates you have not set the port in the Telnet session. Set the port to 5000.  When this is done, there is no password required.

此常見問答集適用於:

產品系列: 同步脈波產生器

產品:

常見問答集 ID 60806

檢視所有常見問答集 »