下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

How many cycles and how long a time period should be needed when using INFINITE mode to measure jitter?

問題:

How many cycles and how long a time period should be needed when using INFINITE mode to measure jitter?

答案:

A real-time capture of 10uS will show about 12000 2.5Gb edges. An ET mode capture of 12,000 edges will take about a ten seconds to accumulate in WfmDB mode. The TDSJIT3 TIE result includes jitter from 100kHz (1/10us) to the bandwidth of the scope (8GHz for a TDS6804B). The eye diagram includes jitter from 0.1Hz (1/10s) to the bandwidth limit of the scope.

此常見問答集適用於:

產品系列: TDS5000 TDS5000 TDS5000

產品:

常見問答集 ID 58331

檢視所有常見問答集 »