下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

How do I set up an Ethernet bus decode?

問題:

How do I set up an Ethernet bus decode?

答案:

Make sure your setup is prepared to decode, that you have the needed probes, scope options, test boards, etc. Once you have the options it's important to know how to use the options and probe your signal. To setup Ethernet bus decoding, turn on your bus, set the input channel, select the data rate. Next you set your threashold levels since Ethernet has three levels you have to select high and low. Watch this short video to see how to setup Ethernet bus decode and how to trigger. 

 

此常見問答集適用於:

產品系列: MDO3000 MDO4000 MSO4000/DPO4000

產品:

常見問答集 ID 64731

檢視所有常見問答集 »