下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

Is the difference in the measured results between the TDSJIT3 software and using an infinite mode/Jitter mask acceptable?

問題:

Is the difference in the measured results between the TDSJIT3 software and using an infinite mode/Jitter mask acceptable?

答案:

Since longer acquisitions include drift and wander, they will normally be higher in jitter amplitude for a given population. So one must be careful and make sure the frequencies being measured are equivalent. So run TDSJIT3 in Free-Run mode for about 10 seconds to see what the longer term noise is - it should be similar to the WfmDB mask test.

此常見問答集適用於:

產品系列: TDS5000 TDS5000 TDS5000

產品:

常見問答集 ID 58496

檢視所有常見問答集 »