Can I use a GPIB interface card from Keithley or Capital Equipment Corporation (CEC) in Linux?
Product(s) :GPIB Interfaces: KPC-488.2, KPC-488.2AT, KPCI-488
Question : Can I use a GPIB interface card from Keithley or Capital Equipment Corporation in the Linux operating system?
Answer: Although Keithley does not provide a Linux driver for these GPIB interface cards, several are available on the Internet at large.
These GPIB interface cards from Keithley/CEC make use of the industry standard NEC 7210 controller for IEEE-488. Any required register level information is contained in the documentation of this controller chip.
Below are some links that may contain a suitable driver for GPIB interfaces in Linux:http://sourceforge.net/projects/linux-gpib/
常見問答集 ID 71431檢視所有常見問答集 »