Are the P7700 Series TriMode Probes Compatible with my Oscilloscope?


Are the P7700 Series TriMode Probes Compatible with my Oscilloscope?


The P7700 Series TriMode Probes are compatible with all DSA DPO MSO 70000 Series real-time oscilloscopes running Windows 7 or Windows 10 and firmware version 10.6 or higher. Oscilloscopes capable of these requirements include the following:

· DPO70000C series

· DSA70000C series

· MSO70000C series

· DPO70000D series

· DSA70000D series

· DPO70000DX series

· MSO70000DX series

· MSO70000SX series

If your DSA DPO MSO 70000 Series real-time oscilloscope is not at least a C series oscilloscope or later, then it is not capable of using the P7700 Series TriMode probes.

Older oscilloscopes with the Tek Connect interface, such as the TDS7000 Series real-time oscilloscopes, are not compatible with the P7700 Series TriMode probes.

This FAQ Applies to:

Product Series: Low Voltage Differential Probes, DPO7000, DPO70000SX, MSO/DPO70000

Product: DPO70404, DPO70404B, DPO70404C, DPO7054, DPO7054C, DPO70604, DPO70604B, DPO70604C, DPO70804, DPO70804B, DPO70804C, DPO7104, DPO7104C, DPO71254, DPO71254B, DPO71254C, DPO71604, DPO71604B, DPO71604C, DPO72004, DPO72004B, DPO72004C, DPO72304DX, DPO72304SX, DPO72504D, DPO72504DX, DPO7254, DPO7254C, DPO73304D, DPO73304DX, DPO73304SX, DPO7354, DPO7354C, DPO75002SX, DPO77002SX, DSA70404, DSA70404B, DSA70404C, DSA70604, DSA70604B, DSA70604C, DSA70804, DSA70804B, DSA70804C, DSA71254, DSA71254B, DSA71254C, DSA71604, DSA71604B, DSA71604C, DSA72004, DSA72004B, DSA72004C, DSA72504D, DSA73304D, MSO70404, MSO70404C, MSO70604, MSO70604C, MSO70804, MSO70804C, MSO71254, MSO71254C, MSO71604, MSO71604C, MSO72004, MSO72004C, MSO72304DX, MSO72504DX, MSO73304DX, P7708, P7713, P7716, P7720, TDS7154, TDS7154B, TDS724D, TDS7254, TDS7254B, TDS7404, TDS7404B

FAQ ID : 255371

View all FAQs »


Go to top