與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)
歡迎使用 Tektronix 產品支援
技術文件 文件類型 發行日期 Queensboro Community College Case Study
As an adjunct professor at Queensboro Community College’s electronic engineering program, Enrique Haro was concerned that his students’ education was limited by a lack of equipment. Haro and Queensboro Community College partnered with Tektronix to …
個案研究 Testing Laser Diode Modules and VCSELs with the 2601B-PULSE SMU and KickStart Software
This application note examines the hardware and software tools that are required for testing laser diodes and vertical cavity surface emitting lasers in today's R&D labs.
應用摘要 2470 Breakdown and Leakage Current Measurements on High Voltage Semiconductor Devices
Keithley has long had a strong presence in high power semiconductor device test. Most recently, Keithley introduced the 2470 1.1 kV Graphical SourceMeter® Source Measure Unit to address challenging measurements for SiC and GaN device testing. This …
軟體 文件類型 零件編號： 發行日期 KickStart Instrument Control Software Version 2.3.0 (Windows 10, 8, 7 compatible)
KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features: Save time by automating data collection of millions of readings. Set up a multi-instrument test with the ability to …
應用 KICKSTART-2.3.0 KickStart Instrument Control Software Version 2.2.1 (Windows 10, 8, 7 compatible)
KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ability to …
常見問答集 常見問答集 ID Does KickStart support RS-232 communication?
No. KickStart only communicates to instruments connected using USB, GPIB or LAN.
470096 How do I export data to .csv file with KickStart version 2.0.0?
Export the reading table as a .csv file or the graph as a .png file using the “Export” button in the Run History menu.
469991 My Model 2701 is not automatically discovered in the KickStart instrument pane. How do I connect to the Model 2701?
The Model 2701 is not an LXI-C instrument. You must manually add its IP address in KickStart. Click on the “Advanced” section of the Instrument Pane in KickStart version 2.0.0. Enter the IP address for the Model 2701.
470101 During KickStart version 2.0.0 installation, I receive an error message “The operating system is not adequate for running KickStart.” What are the PC system requirements for KickStart version 2.0.0?
KickStart version 2.0.0 requires a 64-bit Windows Operating System. This version of KickStart supports Windows 7 and higher. Keithley recommends that you have at least 8 GB of PC disk space and at least 8 GB of RAM. If you need to run KickStart …
470106 How do I create an I-V Characterizer test that uses more than one SMU Instrument?
Use the “Instruments” button in the I-V Characterizer app toolbar to access the “Add Channels” button to add more SMU instruments to your test. You can add up to 4 SMU instruments in a single I-V Characterizer app.
470091 After I place an order for a software-license for Kickstart, how do I get and install the license?
If you ordered KICKSTARTFL-BASE that is used with the Kickstart 2.0 or higher software application. If you ordered KICKSTARTFL-HRMA that is used with Kickstart 1.9 software application> After you place an order for Kickstart 2.xx, you may receive …
772141 Does Kickstart support the 2600? The 2600A or 2600B?
Keithley's Kickstart software supports the 2600A and 2600B Source Measure Unit models. Kickstart does not work with the non-A or non-B 2600 instrument models. This applies for version 1.9.8+