下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

產品支援和下載

歡迎使用 Tektronix 產品支援

在我們整天與您愉快「討論技術」的時候,我們知道您很著急。所以我們讓您能夠輕鬆地下載所有目前產品和多項已停產產品的手冊、產品規格表和軟體。只要告訴我們您目前所用的產品,我們就會向您呈現所擁有的一切資訊。

您選擇的產品機型目前尚有存貨可供購買。 該產品提供以下支援資訊。

  • 技術文件 文件類型 發行日期
    使用 FlexChannel 輸入通道進行多重匯流排系統的疑難排解
    對具有多個處理器、感應器、制動器、通訊和人機介面的嵌入式系統進行疑難排解,通常需要大多數的示波器上提供超過 2 或 4 個量測通道。雖然更多的通道在一定程度上會有所助益,但是混合訊號示波器和智慧地應用數位通道將可提供更廣泛的系統可視性。本技術摘要介紹了 5系列 MSO 所提供的 FlexChannelTM 輸入通道的使用方式,以應對這些挑戰。  
    技術簡介
    使用示波器進行 USB 2.0問題的疑難排解
    瞭解 USB 2.0 實體層的基礎知識,協助您完成匯流排問題或系統問題的疑難排解作業。瞭解在配備 USB 2.0 匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。 
    應用摘要
    先進雷達分析
    隨著當今雷達技術快速發展,若要開發和製造高度專業的新型電子產品以檢測雷達訊號,將需要採用尖端技術和工具。本手冊介紹Tektronix任意波形產生器、即時頻譜分析儀和高頻寬示波器,這些儀器滿足了現代雷達應用要求需要的所有功能。即時檢視進階脈衝壓縮系統、生成和分析所有數位動態訊號類型,可為密集的商用電子系統創造高度可靠又經濟有效的系統設計。
    應用摘要
    使用 5-PWR 應用軟體執行電源供應器量測和分析
    最佳化和驗證電源供應器設計需進行許多重要的量測。這些量測包括: 線路端電源品質量測,如功率因數和諧波 切換裝置量測,如切換損耗和安全工作區 輸出量測,如漣波 雖然許多量測可以手動進行,但許多工程師會在其示波器上使用自動化工具,以獲得更快速且重複性更高的結果。 本應用摘要說明了如何設定示波器進行這些量測,並著重於介紹配備 5-PWR 分析軟體的 5 系列 MSO 示波器。摘要中提供了各種量測的高階概覽、使用方式及所提供的結果等內容。
    應用摘要
    使用示波器除錯 CAN、LIN 和 FlexRay 汽車匯流排
    說明常見的汽車匯流排 (CAN、LIN 和 FlexRay) 的實體層基礎知識,使您可以輕鬆地完成匯流排問題或系統問題的疑難排解作業。瞭解在配備汽車匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。
    應用摘要
    嵌入式系統設計中的低速串列匯流排除錯
    當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。
    應用摘要
    如何使用配備 I2C 和 SPI 解碼功能的示波器疑難排解系統問題
    瞭解常見的晶片間互連 (Inter-Chip) 匯流排 (I2C 和 SPI) 的實體層基礎知識,使您可以輕鬆地完成匯流排問題或系統問題的疑難排解作業。瞭解在配備 I2C 和 SPI 匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。 
    應用摘要
    使用 Tektronix 示波器和選配軟體提供串列支援
    Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。
    選購指南
    Tektronix 探棒選擇指南
    Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。
    產生選擇器指南
    使用示波器進行乙太網路問題的疑難排解
    瞭解 10BASE-T 和 100BASE-TX 乙太網路實體層的基礎知識,協助您輕鬆地完成匯流排問題或相關系統問題的疑難排解作業。瞭解在配備乙太網路分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。
    應用摘要
    Achieve Higher Vertical Resolution for More Precise Measurements
    This white paper describes an approach in which new oscilloscope ADC technology, combined with digital signal processing and a low-noise front end, can provide even higher resolution than found in conventional high bit-rate ADC implementations. It …
    白皮書
    Working Remotely with Tektronix Oscilloscopes
    Most modern Tektronix oscilloscopes support one or more ways of working remotely.  These methods include simple file-sharing and offline analysis, control using PC software, custom programming in Python or other languages, and remote access over a …
    技術簡介
    Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
    Debugging embedded systems often involves looking for clues that are hard to discover just by looking at one domain at a time. The ability to look at time and frequency domains simultaneously can offer important insights. FIGURE 1. Spectrum …
    應用摘要
    Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope
    The MIPI I3C standard defines a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. This application note gives a brief orientation on the physical layer and packet structures of the I3C protocol. It …
    應用摘要
    Measuring Digital Clock Stability and Jitter with an Oscilloscope
    This application note explains how to use oscilloscope measurements to quantify the performance of any digital clock, including processor clocks and communications clocks. It briefly covers amplitude measurements and focuses on clock frequency …
    應用摘要
    Using FastFrame Segmented Memory on the 4/5/6 Series MSO
    Communications systems, RADAR, and ultrasonic sensors all rely on signals that transfer information in bursts followed by dead time. Processor interrupt pulses can occur intermittently and infrequently. Conventional signal-shot acquisitions on …
    技術簡介
    Visual Triggers: Graphical Methods for Capturing Bursts and Other Complex Signals on Oscilloscopes
    Visual triggers allow you to build triggers by thinking in terms of wave shapes. This technical brief starts by explaining how to quickly capture bursts of specific length by drawing boxes on an oscilloscope display. It then describes how to apply …
    技術簡介
    Solutions for Aerospace and Defense
    Integrated Tektronix measurement tools for signal capture, characterization, simulation and analysis help you deliver on your promises. Learn more about our military/government solutions.
    小冊子
    Tek049 ASIC Powers Next-Generation Oscilloscopes
    The Tek049 is a new mixed-signal oscilloscope ASIC. It consists of 400 million transistors which make up its high-speed, precision ADCs and integrated DSP. The Tek049 recently debuted as the powerhouse behind Tek’s new 5 Series MSO and will power …
    白皮書
    Oscilloscope Selection Guide
    From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …
    選購指南
    In-circuit Measurement of Inductors and Transformers with an Oscilloscope
    An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …
    應用摘要
    Getting Started with Power Rail Measurements Application Note
    No matter the industry, power integrity requirements are becoming more and more strict and the number of critical power rails in a single design is only growing. Traditional power integrity applications typically use passive probes with AC coupling …
    應用摘要
    Debugging SPMI Power Management Buses with an Oscilloscope
    Designers of mobile devices and other portable systems rely on the System Power Management Interface (SPMI) protocol to monitor and dynamically control supply voltages based on real-time system demands. Enabling them to achieve lower power usage at …
    應用摘要
    Debugging SENT Automotive Buses with an Oscilloscope
    The SENT bus is used in automotive sensors to transmit high-resolution measurements to electronic control units (ECUs), usually in the powertrain. Decoding the Single Edge Nibble Transmissions (SENT) by looking at the signals can be very difficult …
    應用摘要
  • 軟體 文件類型 零件編號: 發行日期
    5 SERIES MSO (non-windows) OS FIRMWARE-V1.26
    Download this firmware to install the latest updates for the 5 Series MSO. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
    韌體 066196410
    5 SERIES MSO (windows) OS FIRMWARE-V1.26
    Download this firmware to install the latest updates for the 5 Series MSO. This firmware only applies to oscilloscopes that do have option 5-WIN (Windows 10) installed.
    韌體 066196510
    5 Series MSO (non-Windows) Firmware - V1.24.9
    Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
    韌體 066196409
    5 Series MSO (non-Windows) Firmware - V1.22.4
    Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
    韌體 066196407
    4, 5 and 6 Series MSO, 5 and 6 Series Low Profile Digitizers IVI-COM Driver - V1.6.0
    TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes; 5 and 6 Series Low Profile Digitizers IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI …
    驅動程式 066192807
    TEKVISA Connectivity Software - V4.2.0
    TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …
    驅動程式 066093812
    4, 5 and 6 Series Mixed Signal Oscilloscope IVI-COM Driver - V1.5.0
    The TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes is an IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver …
    驅動程式 066192806
    5 Series MSO (non-Windows) Firmware - V1.16.6
    Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
    韌體 066196405
    5 Series MSO Low Profile 3D CAD Files - V1.0
    3D CAD files containing all exterior surfaces for standard rack mount configuration. STEP and IGES file formats included.
    公用程式 066195100