下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

產品支援和下載

歡迎使用 Tektronix 產品支援

在我們整天與您愉快「討論技術」的時候,我們知道您很著急。所以我們讓您能夠輕鬆地下載所有目前產品和多項已停產產品的手冊、產品規格表和軟體。只要告訴我們您目前所用的產品,我們就會向您呈現所擁有的一切資訊。

您選擇的產品機型目前尚有存貨可供購買。 該產品提供以下支援資訊。

  • 產品規格表 文件編號: 發行日期
    5 系列 MSO
    48T-60850-12
    1.5 GHz 主動式探棒
    TAP1500 單端主動式 FET 探棒提供優異的高速電性和機械效能,能夠滿足現今數位系統設計的需求。
    51T-19043-8
  • 技術文件 文件類型 發行日期
    Measuring Power Supply Switching Loss with an Oscilloscope
    Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply …
    應用摘要
    對時序水平抖動的認識和鑒定
    所有使用電壓轉換來顯示時序資訊的電系統,都會攜帶《時序水平抖動》這個不受歡迎的伴侶。本文主要討論電系統中的水平抖動。
    初階
    使用任意波形/函數產生器實現真實世界訊號
    太克AFG3000系列以及ArbExpress應用軟體的詳細的步驟演示
    應用摘要
    瞭解和執行 USB 2.0 實體層測試
    本應用摘要提供了 USB 2.0 實體層測試的概述,包括訊號品質、湧入電流檢查、下降和衰退的測試,以及電氣相容性測試。
    應用摘要
    Wave Inspector® 簡化波形分析作業
    現代的數位示波器可擷取大量資料,且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能,如何提供工具,讓您快速有效率地找出所要的答案。
    應用摘要
    瞭解更多的通道如何簡化電源供應時序
    大多數的系統皆會使用幾組電源軌道,而且驗證正確的電源供應器時序也需要多個示波器輸入通道。您將瞭解檢查交流/直流電源供應器的開機和關機時序的基本知識、如何查看大容量電源供應器和各種負載穩壓器,以及配備超過 4 個通道的示波器將可如何加速流程。 
    應用摘要
    5 系列MSO混合訊號示波器升級指南
    5 系列 MSO 所提供的許多功能均可現場升級,包括頻寬、記錄長度、任意/函數產生器、邏輯通道和通訊協定支援。這份 2 頁的產品規格表列出了所有在購買後可用的升級選項。  
    規格摘要表
    使用 FlexChannel 輸入通道進行多重匯流排系統的疑難排解
    對具有多個處理器、感應器、制動器、通訊和人機介面的嵌入式系統進行疑難排解,通常需要大多數的示波器上提供超過 2 或 4 個量測通道。雖然更多的通道在一定程度上會有所助益,但是混合訊號示波器和智慧地應用數位通道將可提供更廣泛的系統可視性。本技術摘要介紹了 5系列 MSO 所提供的 FlexChannelTM 輸入通道的使用方式,以應對這些挑戰。  
    技術簡介
    使用示波器進行 USB 2.0問題的疑難排解
    瞭解 USB 2.0 實體層的基礎知識,協助您完成匯流排問題或系統問題的疑難排解作業。瞭解在配備 USB 2.0 匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。 
    應用摘要
    先進雷達分析
    隨著當今雷達技術快速發展,若要開發和製造高度專業的新型電子產品以檢測雷達訊號,將需要採用尖端技術和工具。本手冊介紹Tektronix任意波形產生器、即時頻譜分析儀和高頻寬示波器,這些儀器滿足了現代雷達應用要求需要的所有功能。即時檢視進階脈衝壓縮系統、生成和分析所有數位動態訊號類型,可為密集的商用電子系統創造高度可靠又經濟有效的系統設計。
    應用摘要
    使用 5-PWR 應用軟體執行電源供應器量測和分析
    最佳化和驗證電源供應器設計需進行許多重要的量測。這些量測包括: 線路端電源品質量測,如功率因數和諧波 切換裝置量測,如切換損耗和安全工作區 輸出量測,如漣波 雖然許多量測可以手動進行,但許多工程師會在其示波器上使用自動化工具,以獲得更快速且重複性更高的結果。 本應用摘要說明了如何設定示波器進行這些量測,並著重於介紹配備 5-PWR 分析軟體的 5 系列 MSO 示波器。摘要中提供了各種量測的高階概覽、使用方式及所提供的結果等內容。
    應用摘要
    Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
    Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing …
    應用摘要
    使用示波器除錯 CAN、LIN 和 FlexRay 汽車匯流排
    說明常見的汽車匯流排 (CAN、LIN 和 FlexRay) 的實體層基礎知識,使您可以輕鬆地完成匯流排問題或系統問題的疑難排解作業。瞭解在配備汽車匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。
    應用摘要
    嵌入式系統設計中的低速串列匯流排除錯
    當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。
    應用摘要
    使用混合訊號示波器進行數位除錯的訣竅
    隨著電子產品變得更為快速複雜,其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計,以確保可靠的產品運作。問題發生時,設計人員需要迅速地深入瞭解問題的根源,以解決問題。藉由同時分析類比與數位呈現的訊號,更快速找出眾多數位問題的根源,這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。
    應用摘要
    如何使用配備 I2C 和 SPI 解碼功能的示波器疑難排解系統問題
    瞭解常見的晶片間互連 (Inter-Chip) 匯流排 (I2C 和 SPI) 的實體層基礎知識,使您可以輕鬆地完成匯流排問題或系統問題的疑難排解作業。瞭解在配備 I2C 和 SPI 匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。 
    應用摘要
    能將示波器量測解析度提升高於 11 位元的工具
    示波器量測解析度不只取決於類比/數位轉換器是否為 8 位元、10 位元或 12 位元裝置。整個系統 (從端到端) 皆須進行最佳化處理,以減輕雜訊的影響,並改善數位解析度。本應用摘要介紹了使用 Tektronix 示波器進行高解析度量測的相關探測注意事項、HiRes 取樣模式和其他訊號處理技術。
    應用摘要
    使用太克被動式探棒提高量測準確度和降低成本
    本應用摘要介紹太克高頻寬、低電容被動式電壓探棒如何降低示波器使用者的總擁有成本、改善效能和量測準確度及節省使用者設定時間。大多數示波器標準配備的被動式電壓探棒都提供低成本通用型探測解決方案。一般來說,這些探棒缺乏主動式電壓探棒的效能,但堅固耐用且動態範圍寬,適合查看訊號。
    應用摘要
    使用 Tektronix 示波器和選配軟體提供串列支援
    Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。
    選購指南
    Tektronix 探棒選擇指南
    Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。
    產生選擇器指南
    使用示波器進行乙太網路問題的疑難排解
    瞭解 10BASE-T 和 100BASE-TX 乙太網路實體層的基礎知識,協助您輕鬆地完成匯流排問題或相關系統問題的疑難排解作業。瞭解在配備乙太網路分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。
    應用摘要
    Achieve Higher Vertical Resolution for More Precise Measurements
    This white paper describes an approach in which new oscilloscope ADC technology, combined with digital signal processing and a low-noise front end, can provide even higher resolution than found in conventional high bit-rate ADC implementations. It …
    白皮書
    Chalmers University Case Study
                  Case Study   A Passion for Innovation | Chalmers University STUDENT HIGHLIGHT When Alexander Andersson was a kid, he wanted to become a “Lego engineer” — the person who designs the Lego houses and trucks and lanes. As he …
    個案研究
    University of Naples Case Study
    Michele Riccio is an engineering professor at the University of Naples who is passionate about passing along what he calls “the engineering philosophy” to his students.  As an engineer himself, Michele has used Tektronix oscilloscopes for …
    個案研究
    Jitter Testing for 1000BASE-T Ethernet Compliance Application Note
    Compliance testing for IEEE 802.3 Ethernet standards such as 10BASE-T, 1000BASE-Tx and 1000BASE-T requires jittter testing to ensure interoperability.  This application note describes test fixtures, test modes, and the various types of tests with …
    應用摘要
    Next-Generation Oscilloscopes Brochure - 3 Series MDO, 4 Series MSO, 5 Series MSO, 6 Series MSO
    The 3 Series MDO and 4, 5 and 6 Series MSOs offer the largest displays and the greatest user experience of any oscilloscope.  This brochure gives an overview of the platforms, with the similarities and differences between the four series.
    小冊子
    Working Remotely with Tektronix Oscilloscopes Running the Windows Operating System
    Most modern Tektronix oscilloscopes support one or more ways of working remotely. These methods include simple file-sharing and offline analysis, control using PC software, custom programming in Python or other languages, and Windows Remote Desktop …
    技術簡介
    Working Remotely with Tektronix Oscilloscopes
    Most modern Tektronix oscilloscopes support one or more ways of working remotely.  These methods include simple file-sharing and offline analysis, control using PC software, custom programming in Python or other languages, and remote access over a …
    技術簡介
    Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
    Debugging embedded systems often involves looking for clues that are hard to discover just by looking at one domain at a time. The ability to look at time and frequency domains simultaneously can offer important insights. FIGURE 1. Spectrum …
    應用摘要
    EMI Troubleshooting with the Latest-Generation Oscilloscopes
    This application note describes techniques using an oscilloscope that can help you determine the source of unwanted radiated emissions (EMI), especially after an out-of-limits condition has been identified through formal testing or pre-compliance …
    應用摘要
    Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope
    The MIPI I3C standard defines a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. This application note gives a brief orientation on the physical layer and packet structures of the I3C protocol. It …
    應用摘要
    Measuring Digital Clock Stability and Jitter with an Oscilloscope
    This application note explains how to use oscilloscope measurements to quantify the performance of any digital clock, including processor clocks and communications clocks. It briefly covers amplitude measurements and focuses on clock frequency …
    應用摘要
    Making Accurate Current Measurements on Power Supplies with Oscilloscopes
    Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …
    應用摘要
    Making Higher Accuracy Oscilloscope Measurements
    12-bit analog-to-digital converters deliver higher resolution on the 4, 5 and 6 Series MSO oscilloscopes Higher resolution oscilloscope measurements are becoming more important given today’s signal levels. Scopes are available with 12-bit analog-to …
    技術簡介
    Using FastFrame Segmented Memory on the 4/5/6 Series MSO
    Communications systems, RADAR, and ultrasonic sensors all rely on signals that transfer information in bursts followed by dead time. Processor interrupt pulses can occur intermittently and infrequently. Conventional signal-shot acquisitions on …
    技術簡介
    LeCroy HDO6000A/HDO8000A Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
    This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the LeCroy HDO6000A Series and HDO8000A Series 
    競爭優勢
    LeCroy HDO9000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
    This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the LeCroy HDO9000 Series 
    競爭優勢
    Rohde & Schwarz RTO2000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
    This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Rohde & Schwarz RTO2000 Series  
    競爭優勢
    Innovation that drives innovation
    個案研究
    Yokogawa DLM4000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
    This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Yokogawa DLM4000 Series
    競爭優勢
    Visual Triggers: Graphical Methods for Capturing Bursts and Other Complex Signals on Oscilloscopes
    Visual triggers allow you to build triggers by thinking in terms of wave shapes. This technical brief starts by explaining how to quickly capture bursts of specific length by drawing boxes on an oscilloscope display. It then describes how to apply …
    技術簡介
    5 Series MSO - What's in the Box
    規格摘要表
    Solutions for Aerospace and Defense
    Integrated Tektronix measurement tools for signal capture, characterization, simulation and analysis help you deliver on your promises. Learn more about our military/government solutions.
    小冊子
    Characterizing and Troubleshooting Jitter with Your Oscilloscope
    Gives examples of jitter analysis, from basic analysis using frequency and Time Interval Error (TIE) measurements, to more advanced jitter decomposition techniques to help isolate the sources of jitter.  Shows examples of jitter measurements using …
    應用摘要
    Automotive Ethernet: See the True Signal
    As the move toward Automotive Ethernet technology in vehicles accelerates, comprehensive design validation is vital to ensure interoperability and reliable operation across multiple ECUs. This application note provides information on Automotive …
    應用摘要
    Tek049 ASIC Powers Next-Generation Oscilloscopes
    The Tek049 is a new mixed-signal oscilloscope ASIC. It consists of 400 million transistors which make up its high-speed, precision ADCs and integrated DSP. The Tek049 recently debuted as the powerhouse behind Tek’s new 5 Series MSO and will power …
    白皮書
    Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
    Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …
    應用摘要
    Oscilloscope Selection Guide
    From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …
    選購指南
    Keysight X6000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
    This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Keysight X6000 Series 
    競爭優勢
    Keysight S-Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
    This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Keysight S-Series 
    競爭優勢
    In-circuit Measurement of Inductors and Transformers with an Oscilloscope
    An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …
    應用摘要
    Control Loop Analysis Kit for Power Design Stability Measurements
    This document describes how the Tektronix Control Loop Analysis Kit provides a simple test setup for validating and debugging feedback loop stability.  This setup also enables engineers to test power supply rejection ratio (PSRR) on the regulator …
    應用綜覽
    Electronics Engineering For Cleaner Skies
    How Tektronix products have helped the RAISE project take off
    個案研究
    Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
    Automotive Primer: In-Vehicle Networking This primer provides an overview of the trends, challenges and solutions associated with the expected future evolution of in-vehicle networks, as well as a foundation for testing in-vehicle networks to …
    初階
    Getting Started with Power Rail Measurements Application Note
    No matter the industry, power integrity requirements are becoming more and more strict and the number of critical power rails in a single design is only growing. Traditional power integrity applications typically use passive probes with AC coupling …
    應用摘要
    Power Supply Converter Design Procedures
    This poster offers insight into power supply converter design procedures, test stages, challenges, and solutions.
    海報
    Physical Layer Compliance Testing for 1000BASE-T Ethernet
    Ethernet compliance testing requires precise test setups and evaluation against limits dictated by IEEE 802.3 standards.  Automated testing software for oscilloscopes greatly simplifies and speeds testing.  This application note summarizes key tests …
    應用摘要
    Debugging SPMI Power Management Buses with an Oscilloscope
    Designers of mobile devices and other portable systems rely on the System Power Management Interface (SPMI) protocol to monitor and dynamically control supply voltages based on real-time system demands. Enabling them to achieve lower power usage at …
    應用摘要
    Debugging SENT Automotive Buses with an Oscilloscope
    The SENT bus is used in automotive sensors to transmit high-resolution measurements to electronic control units (ECUs), usually in the powertrain. Decoding the Single Edge Nibble Transmissions (SENT) by looking at the signals can be very difficult …
    應用摘要
    Troubleshooting Analog to Digital Converter Offset Using a Mixed Signal Oscilloscope
    This application note gives a procedure for performing quick checks on an Analog to Digital Converter (ADC) system gain, offset and linearity.  The technique uses a ramp signal from a function generator to stimulate the system, including signal …
    應用摘要