與我們聯絡
與我們聯絡
與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)
下載
下載
下載手冊、產品規格表、軟體等等：
Product Support and Downloads
Welcome to Tektronix Product Support
While we’re happy to “talk tech” with you all day long, we know you’re in a hurry. So we’ve made it easy for you to download manuals, datasheets and software for all our current products, and many discontinued products as well. Just tell us which product you’re using, and we’ll show you everything we have.
The product model you have chosen is currently available for purchase. The following support information is available.
-
產品規格表 文件編號： 發行日期 SPG8000 Master Sync / Master Clock Reference Generator Datasheet
20W-28268-9 Changeover Unit
20W-07236-5 Multiformat Video Generator
20W-14227-14 Tektronix Video Signal Generators
20W-17828-4
-
使用手冊 手冊類型 零件編號： 發行日期 SPG8000A
解除機密 077122100 SPG700
解除機密 077123000 Rackmount
現場安裝指示 071274604 Tektronix Supplemental
Product Information Sheet for People's Republic of China Other使用者 071329602 TG8000
Multiformat Test Signal Generator Release Notes版本資訊 077068904 SPG8000
Master Sync / Clock Reference Generator Quick Start User Manual主要使用者 071308005 TG8000
Multiformat Test Signal Generator Module Installation Instructions現場安裝指示 075104501 SPG8000
Master Sync / Clock Reference Generator Release Notes版本資訊 077075104 SPG8000
Master Sync / Clock Reference Generator SPG8UP Field Upgrade Instructions現場安裝指示 075104601 TG8000
Multiformat Test Signal Generator Programmer Manual程式設計師 077068602 TG8000
Multiformat Test Signal Generator User Manual主要使用者 071303606 Tektronix Video System Integration
CAD File Library Reference使用者 077105100 Tektronix Video System Integration
CAD File Library Other使用者 076037301 ECO8000 Series
Automatic Changeover Unit Service Manual服務 077088000 Tektronix Video System Integration
CAD File Library Other使用者 076037300 Video Sync Pulse Generator and ECO8000 Series Automatic Changeover Unit
System Integration Technical Reference使用者 077087700 ECO8000 Series
Automatic Changeover Unit ECO800UP and ECO802UP Field Upgrades Instructions現場安裝指示 075105400 SPG8000
Master Sync / Clock Reference Generator Release Notes版本資訊 077075103 SPG8000
Master Sync / Clock Reference Generator Service Manual服務 077074901 SPG8000
Master Sync / Clock Reference Generator Technical Reference效能驗證 077074702 SPG8000
Master Sync / Clock Reference Generator Quick Start User Manual主要使用者 071308004 SPG8000
Master Sync / Clock Reference Generator Specifications and Performance Verification Technical Reference效能驗證 077074801 Video Sync Pulse Generator and Electronic Changeover Unit
System Integration Technical Reference使用者 077056304 ECO8000 Series
Automatic Changeover Unit Declassification and Security Instructions解除機密 077087900 ECO8000 Series
Automatic Changeover Unit User Manual主要使用者 071322101 SPG8000
Master Sync / Clock Reference Generator Quick Start User Manual主要使用者 071308003 SPG8000
Master Sync / Clock Reference Generator Release Notes版本資訊 077075102 TG8000
Multiformat Test Signal Generator Release Notes版本資訊 077068903 TG8000
Multiformat Test Signal Generator User Manual主要使用者 071303604 650-5343-02
Rackmount Slides and Rails Kit Instructions現場安裝指示 071274603 Video Sync Pulse Generator and Electronic Changeover Unit
System Integration Technical Reference使用者 077056303 SPG8000
Master Sync / Clock Reference Generator Service Manual服務 077074900 ECO8000 Series
Automatic Changeover Unit Release Notes主要使用者 077087800 ECO8000 Series
Automatic Changeover Unit User Manual主要使用者 071322100 SPG8000
Master Sync / Clock Reference Generator Technical Reference效能驗證 077074701 SPG8000
Master Sync / Clock Reference Generator Quick Start User Manual主要使用者 071308002 TG8000
Multiformat Test Signal Generator User Manual主要使用者 071303603 SPG8000
Master Sync / Clock Reference Generator Release Notes版本資訊 077075101 TG8000
Multiformat Test Signal Generator Release Notes版本資訊 077068902 TG8000
Multiformat Test Signal Generator Service Manual服務 077068700 SPG8000
Master Sync / Clock Reference Generator Technical Reference效能驗證 077074700 SPG8000
Master Sync / Clock Reference Generator Declassification and Security Instructions解除機密 077075000 SPG8000
Master Sync / Clock Reference Generator Quick Start User Manual.主要使用者 071308001 TG8000
Multiformat Test Signal Generator User Manual.主要使用者 071303602 TG8000
Multiformat Test Signal Generator Release Notes版本資訊 077068901 TG8000
Multiformat Test Signal Generator Programmer Manual程式設計師 077068601 SPG8000
Master Sync / Clock Reference Generator Specifications and Performance Verification Technical Reference效能驗證 077074800 SPG8000
Master Sync / Clock Reference Generator Release Notes版本資訊 077075100 SPG8000
Master Sync / Clock Reference Generator SPG8UP Field Upgrade Instructions現場安裝指示 075104600 TG8000
Multiformat Test Signal Generator User Manual主要使用者 071303601 TG700 Firmware Customer Distribution V5.61
This release introduces the following new enhancements on the TG700: SDI7 Module Logo Overlay remains static with Moving Picture enabled; and SDI7 Module Audio Mute and Disable Controls added for the Secondary (Black) Output. It also repairs defects …版本資訊 077022808 VTSRACK-L1, VTSRACK-L2, and VTSRACK-S2
Rackmount Adapter Instructions現場安裝指示 075103101 TG8000
Multiformat Test Signal Generator Release Notes版本資訊 077068900 TG8000
Multiformat Test Signal Generator Programmer Manual程式設計師 077068600 TG8000, GPS7, HD3G7, and SDI7
Multiformat Test Signal Generator, GPS Synchronization and Timecode Module, HD 3 Gb/s SDI Video Generator, and Dual Channel SD/HD/3G SDI Video Generator Declassification and Security Instructions解除機密 077068800 TG8000
Multiformat Test Signal Generator Module Installation Instructions現場安裝指示 075104500 TG8000
Multiformat Test Signal Generator Specifications and Performance Verification Technical Reference效能驗證 077068500 TG700
TV Signal Generator Platform Service Manual服務 077023005 TG700
TV Signal Generator Platform User Manual使用者 071197007 TG700
TV Signal Generator Platform Programmer Manual程式設計師 077013906 TG700
TV Signal Generator Platform User Manual使用者 071197006 TG700
TV Signal Generator Platform Release Notes版本資訊 077022807 TG700
TV Signal Generator Platform Module Installation Instructions現場安裝指示 075098602 TG700
TV Signal Generator Platform PC Tools Technical Reference使用者 077013802 TG700
TV Signal Generator Platform Specifications and Performance Verification Technical Reference效能驗證 077013706 SPG600 & SPG300
Sync Pulse Generators Service Manual服務 071134203 SPG600 & SPG300
Sync Pulse Generator User Manual主要使用者 071170902 SPG600 & SPG300
Sync Pulse Generators Reference使用者 071134103 ECO422D
SD/HD Changeover Unit S/N C050000 and above Installation Manual.主要使用者 071268300 ECO422D
SD/HD Changeover Unit S/N C050000 and above Instruction Manual合併使用者/服務 077035400 TG700
TV Signal Generator Platform User Manual使用者 071197004 TG700
TV Signal Generator Platform Release Notes版本資訊 077022804 TG700
TV Signal Generator Platform Programmer Manual程式設計師 077013903 TG700
TV Signal Generator Platform Specifications and Performance Verification Technical Reference效能驗證 077013703 TG700
TV Signal Generator Platform User Manual使用者 071197003 TG700
TV Signal Generator Platform Release Notes版本資訊 077022803 TG700
TV Signal Generator Platform Module Installation Instruction Manual現場安裝指示 075098601 SPG600
Sync Pulse Generator Rackmount Kit Instructions現場安裝指示 075080001 ECO422D
SD/HD Changeover Unit S/N B020000 and above Instruction Manual合併使用者/服務 071179201 040-1721-00 and above
Adjustable Power-up Delay Upgrade, ECO422D SD/HD Changeover Unit Instructions現場安裝指示 075094700 SPG600 & SPG300
Sync Pulse Generators Service Manual服務 071134202 SPG600 & SPG300
Sync Pulse Generators Reference使用者 071134102 040-1710-00 & 040-1711-00 Product Hardware Upgrade Instructions
SPG600 & SPG300 Sync Pulse Generators Instructions現場安裝指示 075086800 SPG600 & SPG300 User Manual
Sync Pulse Generator User Manual使用者 071134000 SPG600 & SPG300 Quick Reference Manual
Sync Pulse Generator Other使用者 071134100 ECO422D Instruction Manual
SH/HD Changeover Unit Instruction Manual合併使用者/服務 071085901 ECO422D Reference Card
ECO422D Reference Card Other使用者 061423400 Tektronix Supplemental, 071329604
Product Information Sheet for People‚s Republic of China使用者 071329604 SPG8000A
主要使用者 071347901 Tektronix Video System Integration
CAD File Library Reference使用者 077105101 SPG800AUP
Master Sync / Clock Reference Generator Field Upgrade Instructions現場安裝指示 075109200
-
軟體 文件類型 零件編號： 發行日期 TG8000 System Firmware Release V1.7
This version of firmware supports the TG8000 Multiformat Video Test Signal Generator with the addition of the new embedded Dolby E audio generation capabilities (on the SDI7 SD/HD/3G-SDI Test Signal Generator module with Option DBT). Enhanced SMPTE …韌體 066140606 SPG8000 System Firmware Release V1.6
This version of firmware supports the SPG8000 Master Sync / Clock Reference Generator with the addition of the new embedded Dolby E audio generation capabilities (requires Opt. SDI and Opt. DBT) and the enhanced SMPTE ST 309 timecode support which …韌體 066146405 ECO8000 Series System Firmware Release V1.0
This firmware release can be installed on any ECO8000 or ECO8020 product. The ECO8000 and ECO8020 are highly versatile automatic sync and signal changeover units with configurations and capabilities required to address modern master sync application …韌體 066158500 TG8000 FIRMWARE RELEASE V1.5
This firmware release provides improvements to the operation of the time-of-day management system (available with the GPS7 module). Changes have been made to the Once and Recurring operations for Daylight Savings Time (DST). Once operation can add a …韌體 066140604 SPG8000 SYSTEM FIRMWARE RELEASE V1.4
This version of firmware supports the SPG8000 Master Sync / Clock Reference Generator and provides improvements to the operation of the time-of-day management system. Changes have been made to the Once and Recurring operations for Daylight Savings …韌體 066146403 TG8000 System Firmware Release V1.4
This firmware release includes a repair to a potential issue with the AG7 module outputs being disabled. It also includes CW genlock for the GPS7 module, burnt-in timecode (BITC) for the SDI7 module, and new test signals for the BG7 Option CB module …韌體 066140603 SPG8000 System Firmware Release V1.3
This version of firmware supports the SPG8000 Master Sync / Clock Reference Generator. It includes a repair for a potential problem with Option AG outputs being disabled. The SPG8000 is a precision multiformat video signal generator, suitable for …韌體 066146402 TG8000 Firmware Release V1.3
This firmware release feature an enhanced genlock mechanism for TG8000 configurations that include either a GPS7 module or an AGL7 module. It also features CW genlock for the GPS7 module, burn-in timecode (BITC) for the SDI7 module, and new test …韌體 066140602 SPG8000 System Firmware Release, V1.2
This version of firmware supports the SPG8000 Master Sync / Clock Reference Generator. It includes an enhanced genlock mechanism for more robust genlock performance. The SPG8000 is an ideal instrument specifically designed for master synchronization …韌體 066146401 TG8000 Software Tools V1.1
TG8000 PC Software Tools V1.1: Frame Picture Generator, Logo Generator, TGSetup. This release supports the TG8000 Multiformat Test Signal Generator.公用程式 066140701 TG700 Software Download V5.62
This release repairs defects found in earlier versions of the TG700 firmware.韌體 066083414 TG700 Tools Download V5.62
TG700 PC Software Tools V5.62: File Copy Tools, Frame Picture Generator, Logo Generator, TG7Comm, TG7Setup. This release of PC software tools supports firmware release V5.62 that introduces the following new features on the TG700: SDI Module Logo …公用程式 066083511 TG8000 Firmware Release V1.1
This firmware release includes CW genlock for the GPS7 module, burn-in timecode (BITC) for the SDI7 module, and new test signals for the BG7 Option CB module.In addition some improvements to the operation of the time-of-day management system …韌體 066140601 SPG8000 System Firmware Release V1.1
This version of firmware supports the SPG8000 Master Sync / Clock Reference Generator. The SPG8000 is a precision multiformat video signal generator, suitable for master synchronization and reference applications. It provides multiple video reference …韌體 066146400 TG700 TOOLS DOWNLOAD, V5.61
TG700 PC Software Tools V5.61: File Copy Tools, Frame Picture Generator, Logo Generator, TG7Comm, TG7Setup. This release introduces the following new features on the TG700: SDI Module Logo Overlay with Moving Picture Enabled, and SDI7 Module Audio …應用 066083510 TG700 Software Download V5.61
This release introduces the following new enhancements on the TG700: SDI7 Module Logo Overlay remains static with Moving Picture enabled; and SDI7 Module Audio Mute and Disable Controls added for the Secondary (Black) Output.It also repairs defects …韌體 066083413 TG8000 Firmware Upgrade
This version of firmware supports the TG8000 Multiformat Test Signal Generator. The TG8000 is the successor to the TG700 TV Test Signal Generator Platform. Each of the modules that was designed to operate on the TG700 mainframe will also operate in …韌體 066140600 TG8000 Software Tools
TG8000 PC Software Tools V1.0: TGSetup, Frame Picture Generator, and Logo Generator. This release supports the TG8000 Multiformat Test Signal Generator.應用 066140700 TG700 TOOLS DOWNLOAD V5.6
TG700 PC Software Tools V5.6: File Copy Tools, Frame Picture Generator, Logo Generator, TG7Comm, TG7Setup. This release adds support for the new SDI7 2-Channel SD/HD/ 3Gb/s SDI Video Generator Module.應用 066083509 TG700 SOFTWARE DOWNLOAD V5.6
This release adds support for the new SDI7 2-Channel SD / HD / 3Gb/s SDI Video Generator Module.韌體 066083411 TG700 TOOLS DOWNLOAD V5.55
TG700 PC Software Tools V5.55: File Copy Tools, Frame Picture Generator, Logo Generator, TG7Comm, TG7Setup. New in this release is support for additional functionality for the HD3G7 and GPS7 module in the TG7Setup application.應用 066083508 TG700 SOFTWARE DOWNLOAD V5.45
This release adds new features to the GPS7 GPS Synchronization and Timecode module including the ability to genlock to NTSC, PAL, and HD trilevel signals. The module can now use 720 50p trilevel sync as a genlock reference source. Timecode outputs …韌體 066083408 TG700 SOFTWARE DOWNLOAD v5.4
This release adds new features to the GPS7 GPS Synchronization and Timecode module including the ability to genlock to NTSC, PAL, and HD trilevel signals. Timecode outputs can be synchronized to VITC present on the reference input signal.應用 066083407 SPG600/300 SOFTWARE UPGRADE
Download the latest firmware release for the SPG600/300 sync pulse generators. This release includes the stable Web Application Interface.韌體 066058400 TG700 Software Download - V5.64
This release adds support for the newer GPS receivers integrated into the GPS7 module韌體 066083415 SPG8000A, SPG8000, and SPG700 Firmware Release V2.1
This version of firmware supports the SPG8000A and SPG8000 Master Sync / Clock Reference Generator and the SPG700 Multiformat Reference Sync Generator.韌體 066146406
-
常見問答集 常見問答集 ID Are there any patterns available for the TG700 that can be used to test down conversion to standard definition?
SMPTE RP219 defines a very specific color bar pattern that is compatible with both 16x9 HDTV and 4X3 down conversion to Analog. We offer a test signal set for the TG700 with HDVG1 module to provide this test signal. You can download this file here.60386 What is the Frame Reset function within the TG700?
The Frame Reset function allows the TG700 to output different video formats simultaneously.61256 Can the AWG7000 be used to output a video test signal for SDI testing?
No. The AWG7000 does not have the proper memory structure to generate SDI test signals. We recommend using a video test generator such as our TG700 with the appropriate module (DVG7, HDVG7 or SDI7).64526 When the TG700 loses power+ all settings are lost including timing+ and IP address. Why are the settings not returned on power-up?
The original factory setting will be restored on power-up unless you have saved your settings.The setting for power on condition can be saved by setting the instrument as desired, including signals, timing, IP address. Once set to your requirements …57936 If you restore the primary inputs on an ECO422/D while it is currently switched to the backup inputs+ will it automatically switch back to primary?
The behavioral logic of the ECO422D is described in table 2-3 on page 2-8 of the ECO422D user manual (also shown below). One general rule of thumb is that the unit will NEVER automatically switch to a bad signal; it can only switch to a bad signal if …63751 How can I generate a tri-level sync signal?
The Tektronix TG700 with either the AGL 7 module or the BG7 module can produce a tri-level sync signal.63466 How do you get the AVG7 module into 480P Y+Pb+Pr mode?
480P is also known as 525P. If 525p YPbPr is not already loaded onto the TG700:Download the TG700) signal library 1 and Library 3 files, and the TG700 tools from our website to your PC. Links are as follows:TG700 Library 1TG700 Library 3TG700 …58306 How do you configure the DIP switches on an ECO422D?
The DIP switch configuration is covered in the ECO422D user manual and in the quick reference card that ships with the instrument. There are 11 banks of switches labeled S1 through S11 which correspond to the 11 pairs of signal inputs. Each of these …61811 Are there any tricks or tips for troubleshooting fault indicators on the ECO422/ECO422D?
Troubleshooting at time of Installation1. Each channel that is used must have a primary and backup signal of the same type. You cannot mix signal types on a channel. 2. Each channel must be configured for the type of signal being input to that …63126 How do I make a round or partially transparent logo for the SPG300/600?
When creating a logo file from a bitmap using the logogen.exe program, you can set the white, grey and blanking limits for that logo. The blanking limit designates a certain lightness (0-255) for which all lower (darker) values will be interpreted as …55701 Does Tektronix have any documentation on what the Co-site pulse is intended to test? Is it intended just to show chrominance and luminance are aligned in a digital signal+ or is there another video parameter it is intended to measure?
We do not have any documents relative to the Co-siting pulse. The whole intention is to provide a pulse in the center of the screen that shows the timing relationship of chroma and luma samples. It is a one sample wide pulse, and when converted to …60571 What happens if the primary inputs fail+ and THEN the secondary inputs fail on an ECO422/D?
The behavioral logic of the ECO422D is described in table 2-3 on page 2-8 of the ECO422D user manual (also shown below). One general rule of thumb is that the unit will NEVER automatically switch to a bad signal; it can only switch to a bad signal if …64081 Can signals developed for the TG2000 be loaded to the TG700?
Signals developed with the SDP2000 software for the HDVG1 and DVG1 modules can be directly loaded to the HDVG7 and DVG7 modules. Signals developed for the AWVG1 and AVG1 modules are not compatible in format for use in the AVG7, AWVG7, and ATG7 …60486 The SPG300 or SPG600 loses all settings when powered down. Is there a way to save the settings?
The power up condition is saved in the SYSTEM PRESET menu. Set up the instrument as desired for power up, Enter the SYSTEM PRESET menu, then down arrow to SAVE POWER-UP PRESET. Then press ENTER. Future power-up will revert to this condition. Any …56821 Why do some of the test signals show a Gamut error directly from the generator+ and look really bad when converted to composite?
Many of the signals generated in serial component format are designed for testing the response of a digital to analog conversion, in which the output of the system is analog component. Signals such as sweeps, multiburst, and 3 channel step signals …59026 What is the sequence mode on the TG700?
The sequence mode allows the user to write Tcl programming scripts to control functions of the modules within the TG700, similar to the functions already used in the TG2000. These sequences could be used to move the frame picture to the right while …61331 What are the burst frequencies for each of the multiburst test signals (1-10MHz+ 10-20MHz and 20-30MHz)?
For the most part the multiburst packet frequencies are distributed evenly across the given frequency range. The only exception to this is that the first packet in the 1-10MHz multiburst pattern is 1MHz instead of 0MHz (DC). The exact packet …64011 How many modules can be fitted into the TG700?
The TG700 can hold up to 4 modules. However it is only possible to fit one AGL7 module, which must be placed in slot 1 of the 1RU frame. The mix of modules can contain a maximum of 2 HDVG7 or AWVG7 modules within the mainframe, due to power …60781 In the TG700 tools+ what is the difference between the TG7 Backup/TG7 Restore and the TG7 Duplicator functions?
The backup and restore tools work together. Backup saves only the presets to the PC, then restore will return the presets to the TG700. No other files are saved. These tools are best used when a generator is sent to service, as presets are likely to …63761 Does the SPG300/600 have a matrix (pathological) SDI test signal?
The SDI pathological test signal (half magenta, half grey) which is sometimes called the SDI matrix test signal is available on the SPG300. It is called the "SDI checksum" test signal and is available from the "SDI" category of signals.61706 When powering down the generator+ it reverts to factory settings when re-powered. Can the settings be changed and saved?
The TG700 does not automatically save the last settings when powered down. It reverts to the power on defaults, which in your case is the factory setting. Once the generator has been set up as required, enter the TG700 mainframe menu. Use the …61391 Does the TG700 require a rackmount kit or does it automatically come with rack slides?
The TG700 comes with rack slides as purchased; no additional rackmount kit is required.63406 How do I configure Sun and Microsoft Java to both work on the same computer so that I can remotely access both MTM400s and other Tektronix instruments ?
Please see the following doucument that details setting up both Java applications on the same computer.55581 How do I put a logo on the SPG300/600 output?
Before any graphic can be displayed on an SPG it must be converted from a bitmap image to a logo file. This can be done by the SPG logo generator software which comes with the instrument.To load a logo into the SPG300 or 600, simply log into the …55706 How do you delete test signals from the TG700?
Signals are deleted from the TG700 using the TG7COMM program. Open the TG7COMM; provide the IP address of the TG700. Open the module you want to delete signals from. Open the SIGNAL or Picture folder, as appropriate, then the folder for the format …60751 What is the Frame Pattern (FP) option?
The Frame Pattern option adds additional memory to the mainframe. This allows the HDVG7, DVG7, AWVG7, AVG7 modules, to generate full frame patterns. Full frame patterns can be natural scenes such as a shot from a digital camera, or a complex test …61251 Why can’t I upload my logo file to my SPG300/600?
There is a known issue which sometimes prevents logo files smaller than 20k in size from being uploaded to an SPG 300 or SPG 600. The simple workaround is to increase the size of the logo.56251 What are the module limitations in the TG700?
Four modules can be installed in the TG700 at any time. Only one AGL7 module is allowed, and it must be in slot 1 for correct operation. Two module types, the HDVG7 and AWVG7, are considered high power modules, and are limited to any combination of …59906 What is the difference between the TG2000 and TG700?
The TG2000 and TG700 are both modular platforms, however the TG2000 is a line-based generator with optional GPIB control for remote control used in a manufacturing and R&D environments. The TG700 has primarily been designed for broadcast and post …61241 Can the AVG7 produce different NTSC or PAL signals on each channel?
When operating in NTSC or PAL modes, all outputs on the module produce the same signal. It would require multiple modules to produce more than one type of signal.61626 How do I add 720p/50Hz or 720p/24Hz support to my TG700?
720p 24Hz and 50Hz test signals were introduced in version 4.0 of the TG700 firmware and tri-level black burst signals at these rates were added in firmware version 4.2 so in order to gain access to these you will need to upgrade your firmware to at …61776 Are the modules in the TG700 Hot Swappable?
No. The unit must be powered down before modules can be removed or installed. Two screws on the rear panel allow the module to be removed. To remove the modules simply attach BNC "T" or terminator to two of the outputs of the module and pull out the …60371 Why do I lose my settings when I power down my SPG300/600?
When the SPG300/600 powers on it will always set itself according to the power on default preset and will not remember any changes that had been made previously. If you wish to change the power on preset this is a fairly easy procedure.First …64371 Can I upgrade the options on the TG700 later?
The FP option for the TG700 can be added using upgrade kit 040-1698-00. All other options on modules must be ordered at time of purchase. They cannot be upgraded later. Therefore it is recommended that if you are considering the options BK or CB …60461 How many Frame Resets can be used on the TG700?
Please refer to the configuration guide below.60776 Does the TG700 have a redundant power supply?
No there is only one power supply module that can be fitted into the TG700. If the customer needs redundancy within his system he should consider using two TG700 with an ECO422D unit. In the event of a failure, the power supply module can simply be …60596 What happens if there is a bad input on the backup side and the primary then fails on an ECO422/D?
The behavioral logic of the ECO422D is described in table 2-3 on page 2-8 of the ECO422D user manual (also shown below). One general rule of thumb is that the unit will NEVER automatically switch to a bad signal; it can only switch to a bad signal if …64086 What does the moving picture function do?
The moving picture function allows the whole frame picture to be moved horizontally, vertically or random at various rates across the screen. This can be used to test for motion artifacts within MPEG encoders/decoders or other video processing …61171 I am trying to get my TG700 to be controlled from the LAN. Appendix C of your user manual suggests checking remote command operation by connecting to the unit with telnet. When I do that+ I am challenged for a VxWorks login and password. What is the default username/password to telnet to the TG700?
A request for password indicates you have not set the port in the Telnet session. Set the port to 5000. When this is done, there is no password required.60806 How can I tell how much memory is in the TG700 I have?
There have been several different versions of the TG700 main board, with different amounts of memory.The first instrument had standard 16 Meg of memory. Serial number J32xxxx and above and all B01xxxx mainframe serial numbers had 32 Meg memory …60661 What is option 88 for the TG700 and how much does it cost?
Option 88 is the module installation option and does not cost anything. This is merely used to denote that any modules ordered at the same time as the mainframe should be pre-installed before shipping.64091 After moving/installing the AGL7 module in my TG700+ the front panel locked and does not respond+ what happened?
The AGL7 module is the only TG700 module that cannot be placed in any slot. The AGL7 module must be placed in slot 1 (furthest from power supply). If the AGL7 module is placed in any other slot it will lock the TG700 with the message "TG700 : PRESET" …55181 Do you have an example of the command used to change a signal on the TG700?
The following is an example of the command, and the check to see if it was executed. Commands are in bold type, and the returned values are below the command.:mmem:load:sign 2, "/1080 59.94i/COLOR BAR/SMPTE^Color Bars.cmp"mmem:sign:active? 2 "/1080 …57231 When looking at the HDVG7 eye pattern+ it seems to get better if the second output is terminated. Is this normal?
Yes. At these frequencies, any mis-termination can cause reflections that affect the signal. The HDVG1 user manual states that any unused outputs must be terminated.61386 Why does the TG700 have an Ethernet connection but no RS232 port?
The Ethernet port allows greater flexibility for remote control than the RS232 port. Network connections allow faster connection than RS232 and are becoming more commonplace. The Ethernet port allows greater access to equipment from remote locations …61431 Is there a way to have the ECO422D power up with out the time-out delay?
There is no permanent way to disable this function. For troubleshooting purposes, if the FRONT PANEL ENABLE button is held in while powering up the instrument, the instrument will come up with the panel enable and ready to use. This is a one time …59721 Does the TG700 require genlock?
No, the TG700 does not require genlock. The TG700 can optionally be locked to a genlock signal if it has the AGL7 module installed but it can also run off internal sync and generate genlock signals for other devices.63411 What clocks are used in the TG700 and how many can be used at once?
The main oscillator in the TG700 is 27MHz. This clock is used for all standard definition signal generation, and is always available. The secondary clock is synthesized from the 27 MHz oscillator, and is either 74.25 MHz or 74.175824 MHz. The 74.25 …61151 What is the CD-ROM software used for?
The software packages provided on the CD-ROM perform a variety of functions. The TG700 must be connected to a network or using a crossover Ethernet cable to a PC. Then you can use the following programs. TG700Backup saves the configuration of the …61211 How will the GPS roll-over dates affect my Tektronix Video Test Signal Generator models, with the GPS functionality.
In short, the GPS roll-over date will have no effect until possibly 2029, depending on the product. For more detail Download File.773206 Can the HDLG7 be put in a mode to output standard HD SDI like the HDVG7?
The Dual link module, if set for 1080P 60, 59.94 or 50 with 422 Y, Cb, Cr color space produces two identical signals that is each a valid 4:2:2 1080I signal. The limitations on using the dual link module for this are: You are limited to the three …60496
