下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

MSO5000 / DPO5000

MSO/DPO5000B 系列示波器是專為工程師除錯和驗證複雜系統而設計,可為工作台或實驗室提供極佳的訊號完整性及進階分析和數學功能。 MSO 機型包含 16 個數位時序通道 (所有機型皆可安裝,藉以對常用的串列通訊協定進行解碼),讓您能全面檢視系統。 此外,您可以直接在示波器上執行 Windows® 分析軟體。

基本價格
US $16,100 - US $32,200
購買/報價 有任何問題嗎?立即開始聊天
頻寬

最高 2 GHz

記錄長度

最高 250 M 點

數位通道

16
MSO 標準
DPO 選配

類比通道

4

進階訊號量測與分析

Thumbnail

標準分析工具包含 53 種自動量測、量測統計、直方圖、極限測試、進階波形運算、使用者可定義的篩選條件,以及自訂 MATLAB 和 .NET 數學運算外掛程式支援。 進階抖動與眼圖分析和寬頻射頻分析等選配應用解決方案可擴充功能,而視覺觸發可提供圖形觸發定義。

特性

  • 透過各種標準量測工具套件分析訊號參數的特性
  • 進階抖動和時序分析可分析訊號完整性問題及其訊號源的特性
  • SignalVu 軟體可提供寬頻頻譜分析和量測,以及音訊、調變、射頻脈波和穩態時間選項
  • TekScope AnywhereTM 軟體可提供離線測量和分析

完美執行串列分析和相容性測試

Thumbnail

透過適用於低速和中速匯流排的通訊協定解碼和串列觸發選項,簡化進階系統設計除錯和驗證。 透過自動相容性測試,確保中速串列匯流排的互通性。

特性

  • 具有適用於 I2C、SPI、RS-232/422/485/UART、USB 2.0、乙太網路、MIL-STD-1553B、CAN、LIN 和 FlexRay 之串列觸發和分析選項的通訊協定解碼
  • 適用於 USB 2.0、乙太網路、HSIC、MOST 和 BroadR-Reach 的自動相容性測試套件

自動電源量測

Thumbnail

今日有效率的功率轉換器每一瓦數的輸出需要更少的輸入功率,但在電源供應器量測方面,它們也需要更多的輸入功率。 自動電源量測可確保簡單且可重複的結果,以驗證和最佳化電路效能。

特性

  • MOSFET 切換損耗和安全工作區分析
  • 適用於 IEC61000-3-2 預相容性的功率因數和諧波量測
  • 電路內部電感和轉換損耗量測
  • USB2.0 電池充電器規格 v1.1 與 IEC 62684 的 USB 電源轉接器相容性測試

業界最佳探棒 標準

Thumbnail

探棒在量測訊號路徑中是很重要的元件,且不容忽視。 購買 MSO/DPO5000B 系列示波器可讓您免費獲得業界最佳被動探棒。 擁有 3.9 pF 業界最佳負載和高達 1 GHz 的頻寬,TPP 系列探棒將會是您日常使用中不可或缺的探棒。

特性

  • TPP 系列探棒包含標準型探棒,每個類比通道隨附一個探棒
  • 3.9 Pf 的業界最佳電容性探棒負載
  • 500 MHz 或 1 GHz 探棒頻寬

 

機型 類比頻寬 取樣率 記錄長度 類比通道 數位通道 參考價格
DPO5034B 350 MHz 5 GS/s 25M 點 - 125M 點 4 - US $16,100
配置和報價
DPO5054B 500 MHz 5 GS/s 25M 點 - 125M 點 4 - US $19,900
配置和報價
MSO5034B 350 MHz 5 GS/s 25M 點 - 125M 點 4 16 US $20,300
配置和報價
MSO5054B 500 MHz 5 GS/s 25M 點 - 125M 點 4 16 US $24,200
配置和報價
DPO5104B 1 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 - US $24,500
配置和報價
DPO5204B 2 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 - US $27,900
配置和報價
MSO5104B 1 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 16 US $28,800
配置和報價
MSO5204B 2 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 16 US $32,200
配置和報價
機型 類比頻寬 取樣率 記錄長度 類比通道 數位通道 參考價格
DPO5034B 350 MHz 5 GS/s 25M 點 - 125M 點 4 - US $16,100
配置和報價
DPO5054B 500 MHz 5 GS/s 25M 點 - 125M 點 4 - US $19,900
配置和報價
MSO5034B 350 MHz 5 GS/s 25M 點 - 125M 點 4 16 US $20,300
配置和報價
MSO5054B 500 MHz 5 GS/s 25M 點 - 125M 點 4 16 US $24,200
配置和報價
DPO5104B 1 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 - US $24,500
配置和報價
DPO5204B 2 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 - US $27,900
配置和報價
MSO5104B 1 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 16 US $28,800
配置和報價
MSO5204B 2 GHz 5 GS/s - 10 GS/s 25M 點 - 125M 點 4 16 US $32,200
配置和報價
  Tektronix
MSO/DPO5000B
Keysight
S 系列
LeCroy
HDO6000
R&S
RTO 系列
頻寬 350 MHz 至 2 GHz 500 MHz 至 8 GHz 350 MHz 至 1 GHz 600 MHz 至 4 GHz
可升級頻寬
類比通道 4 4 4 2 或 4
類比取樣率 (所有通道) 最高 5 GS/s 最高 10 GS/s 最高 2.5 GS/s 最高 10 GS/s
標準記錄長度 (所有通道) 25 M 50 M 50 M 50 M
數位通道 (MSO) 16 (選配) 16 (選配) 16 (選配) 16 (選配)
作業系統 Open Windows Open Windows Open Windows Open Windows
標準探棒 最高 1 GHz 被動探棒 500 MHz 被動探棒 500 MHz 被動探棒 500 MHz 被動探棒
標準保固 1 年 3 年 3 年 3 年

自動電源量測

Thumbnail

自動量測和報告可確保簡單且可重複的電源品質、切換損耗、磁性損耗、諧波量測等,以符合現今高效率電源轉換器的量測需求。 此外,智慧型 TekVPI 電流和差動探棒可降低不確定性並排除電源量測錯誤。

特性

  • PWR 選配:進階電源量測與分析解決方案可用於電源裝置與電源供應器特性分析和測試
  • USBPWR 選配:USB2.0 電池充電器規格 v1.1 與 IEC 62684 的 USB 電源轉接器自動相容性測試

自動串列分析和相容性測試

Thumbnail

透過適用於 CAN、LIN 和 FlexRay 匯流排的通訊協定解碼和串列觸發選項,簡化自動系統設計除錯和驗證。 透過自動相容性測試,確保 BroadR-Reach 和 MOST 串列裝置的互通性。

特性

  • SR-AUTO 選配:CAN、LIN 與 FlexRay 通訊協定觸發與串列封包內容解碼
  • BRR 選配:BroadR-Reach/100BASE-T1 和 1000BASE-T1 自動相容性解決方案
  • MOST 選配:MOST50 和 MOST150 專用電子相容性和除錯測試解決方案

嵌入式串列觸發與分析

Thumbnail

適用於 I2C、SPI、RS-232/422/485/UART、USB 2.0、乙太網路和 MIL-STD-1553B 的通訊協定解碼、串列觸發和分析可簡化進階系統設計除錯和驗證。

特性

  • SR-AERO 選配:MIL-STD-1553B 通訊協定觸發與串列封包內容解碼
  • SR-COMP 選配:RS-232/422/485/UART 通訊協定觸發與封包內容解碼
  • SR-DPHY 選配:MIPI® D-PHY 自動解碼並搜尋串列封包內容
  • SR-EMBD 選配:I2C 與 SPI 通訊協定觸發與串列封包內容解碼
  • SR-ENET 選配:10BASE-T 和 100BASE-TX 通訊協定搜尋與串列封包內容解碼
  • SR-USB 選配:USB 2.0 低速、全速與高速通訊協定觸發與串列封包內容解碼

串列相容性測試

Thumbnail

透過自動相容性測試,確保 USB 2.0 和乙太網路串列設計的互通性。

特性

  • ET3 選配:10BASE-T、100BASE-TX 和 1000BASE-T 專用的自動特性分析、相容性與完整實體層支援
  • USB2 選配:透過自動化儀器與測試模式控制,執行「單鍵」相容性測試
  • HSIC 選配:HSIC 主機與裝置設計的電子訊號品質測試與通訊協定驗證
  • DDRA 選配:適用於 DDR1/2/3/4、LPDDR1/2/3/4 和 GDDR3/5 的完整記憶體介面分析套件

進階抖動和時序分析

Thumbnail

透過完善的抖動與眼圖分析和分解演算法,DPOJET 可在現今的高速串列、數位和通訊系統設計中,量化關鍵訊號完整性參數並讓您辨識雜訊來源。

特性

  • 分析高速串列和並列匯流排設計效能的特性
  • 分析時脈和資料抖動/雜訊和訊號完整性的特性
  • 分析展頻時脈電路調變的特性
  • 執行 MIPI® D-PHY、DDR 和 MOST 等串列標準的 PHY 測試

寬頻射頻分析

Thumbnail

SignalVu 射頻和向量訊號分析軟體可透過單一套件提供向量訊號分析儀、頻譜分析儀的功能及數位示波器強大的觸發功能。 使用 SignalVu 驗證寬頻設計並分析寬頻頻譜事件的特性。

特性

  • SVE 選配:SignalVu Essentials 可提供寬頻頻譜分析和量測
  • SVA 選配:SignalVu AM/FM/Direct 音訊量測
  • SVM 選配:SignalVu 通用調變分析
  • SVP 選配:SignalVu 進階脈波訊號分析
  • SVT 選配:SignalVu 穩態時間量測 – 頻率與相位
產品規格表 軟體套件 / 軟體選項 說明 配置與報價
Measuring a small signal imposed on a much larger one requires enough vertical scale to capture the large signal, and enough resolution to see the small one.  This video shows some best practices …
8m 21s
Discover how to use a Tektronix MSO5000B Series Oscilloscope to validate the operation of a High-Speed USB serial bus, using the SR-USB option.
6m 19s
This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes.  The capabilities of each oscilloscope are evaluated as we walk through the …
5m 24s
This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Teledyne LeCroy HDO4000.
5m 27s
This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Agilent 9000H.
7m 13s
This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes, focusing on the search and measurement functionality of each instrument for …
6m 15s
This is a side-by-side comparison of the Visual Trigger option on the Tektronix MSO/DPO5000 Series and Zone Triggering on the Agilent DSO-X 4000A Series oscilloscopes.  Find out how MSO/DPO5000 …
3m 30s
I have a DPO5000/B series scope . Is it possible to add digital channel capability without having to purchase a new instrument?
Yes. Simply order a DPO-UP with option MSOE.The MSOE upgrade option includes a P6616 16-channel digital probe with accessories and software option key to enable digital channel functionality.
常見問答集 ID58361
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
常見問答集 ID69176
I am experiencing a SPC failure on DPO/MSO4000B series oscilloscope when I try to run SPC.   What is causing SPC to fail.
If the instrument is running firmware 7.2.0 or 7.3.0 and you have 4 traces on sceen that are postioned away from zero, running SPC could fail. If you press the front panel user "Default Setup", run SPC and it passes, upgrading the instrument to FW 7 …
常見問答集 ID69516
I have an MSO5204 and noticed the MagniVu feature. Can you explain how MagniVu works?
The MagniVu acquisition is a parallel process to the main acquisition, and the record is acquired for every Main acquisition. MagniVu can be displayed at any time to achieve a higher resolution view of the data.MSO 5000 series oscilloscopes use …
常見問答集 ID58381
How do I update the USB UTI drivers on my MSO/DPO5000/B?
There are two seperate parts to this, first is flashing the USB firmware, the second one is the windows driver.Part One: Before installing the TekUTI drivers, the scope needs to be prepared for the update. If TekScope is running, minimize it. The …
常見問答集 ID69271
Do you have a detailed application note on how to use DPO/MSO5000/B Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO/DPO5000/B Series Lab Exercise Book for more details.
常見問答集 ID58166
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
常見問答集 ID467706
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
常見問答集 ID782296
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
常見問答集 ID69181
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
常見問答集 ID780986
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
常見問答集 ID60251
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
常見問答集 ID58421
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
常見問答集 ID59621
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
常見問答集 ID60306
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
常見問答集 ID64756
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
常見問答集 ID470416
What are the maximum power draw ratings for the MSO/DPO5000/B Series oscilloscopes TEKVPI probes?
The max draw for the MSO/DPO5000/B Series TekVPI channels are 15W. With the External power adapter all channels can support any active VPI probe. This adapter is part 19-7465-xx. Please see the table link below for all the information regarding probe …
常見問答集 ID58656
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
常見問答集 ID474266
Why isn’t the TPP1000 (Tektronix Passive Probe 1GHz) compatible with my scope?
Short answer is that if your scope doesn’t have the notched key that allows the probe to connect, then the TPP probe requires a different termination resistance than what your scope can provide. Long answer is that traditionally, passive probes …
常見問答集 ID467701
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
常見問答集 ID471576
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
常見問答集 ID56016
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
常見問答集 ID69186
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
常見問答集 ID247211
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
常見問答集 ID66181
When should I use MagniVu on my oscilloscope?
MagniVu allows you to have higher resolution to accurately determine edge placement on your digital data. It helps you to make precise timing measurements on digital edges. On the MSO/MDO4000/B/C and MSO5000/B Series, you can see up to 32 times more …
常見問答集 ID63886
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
常見問答集 ID64571
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
常見問答集 ID56456
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
常見問答集 ID64781
MSO5000/DPO5000/DPO7000 Series: Is the hard drive removable?
Yes. The MSO5000/DPO5000 hard drive is removable from the right side of the scope. Yes. The DPO7000/DPO7000C hard drive is removable from the back of the scope.
常見問答集 ID55926
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
常見問答集 ID63266
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
常見問答集 ID60156
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.   
常見問答集 ID63516
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
常見問答集 ID61606
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
常見問答集 ID62256
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the …
常見問答集 ID69346
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
常見問答集 ID64751
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
常見問答集 ID782291
MSO5000/DPO5000/DPO7000 Series: How compatible is the GPIB command set with the current TDS5000 and TDS7000 instruments?
The same GPIB grammar is used. Differences in the horizontal time base model and new product features might require some changes in the programs that were developed for older scopes.
常見問答集 ID55921
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
常見問答集 ID64561
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
常見問答集 ID64766
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
常見問答集 ID467516
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
常見問答集 ID64706
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
常見問答集 ID64826
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
常見問答集 ID58571
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
常見問答集 ID66221
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
常見問答集 ID64726
I want to use anti-virus software on my Windows-based oscilloscope. Will it slow down the processing or give me faulty measurement results?
Anti-virus software should not cause any errors in acquiring data or making measurements. The primary effect will be that operations done by the host process may take a little longer. Running anti-virus software on any PC has an effect on processing …
常見問答集 ID58441
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64791
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
常見問答集 ID64771
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
常見問答集 ID64691
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/  
常見問答集 ID59716
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
常見問答集 ID60041
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
常見問答集 ID56226
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.   For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
常見問答集 ID59166
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
常見問答集 ID60416
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
常見問答集 ID64516
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
常見問答集 ID62606
What is the maximum digital channel record length for an MSO5000 Series oscilloscope?
The maximum digital channel record length is 40 Mpoints. The actual digital channel record length depends upon many parameters:The memory option must support desired record length. Therefore, to get 40M digital record length, the instrument will need …
常見問答集 ID58821
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
常見問答集 ID69266
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
常見問答集 ID66226
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
常見問答集 ID69386
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
常見問答集 ID64776
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
常見問答集 ID64251
Differences between the DPO/MSO5000B and the DPO/MSO5000 (nonB) series.
DPO/MSO5000B Product Changes: Solid State Drive now standard no HDD available Standard record length doubled to (25M/ch) on analog and digital channels Interleaves to 50 M on 1 or 2 channels on 2 GHz and 1 GHz models Some capabilities that are …
常見問答集 ID467561
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
常見問答集 ID64666
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
常見問答集 ID468146
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
常見問答集 ID64656
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
常見問答集 ID63686
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64796
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
常見問答集 ID64761
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
常見問答集 ID471231
混合訊號示波器
以現今更快的資料速率和更有限的時序邊際進行設計時,需使用具備優異訊號擷取效能與分析能力的示波器。Tektronix MSO/DPO5000B 系列示波器為工作台或實驗室提供極佳的訊號完整性 (2 GHz 頻寬和 10 GS/秒取樣率),以及進階分析和數學功能。直接在示波器上執行 Windows® 分析軟體。指向並按一下視觸觸發,可讓您輕鬆擷取複雜訊號。MSO 機型包含 16 個數位時序通道 (所有機型皆可安裝,藉以對常用的串列通訊協定進行解碼),讓您能全面檢視系統。

文件編號: 48T-29560-9
Datasheet
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


零件編號: 077022411
使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


零件編號: 077001025
程式設計師
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


零件編號: 077022011
程式設計師
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


零件編號: 077001810
使用者
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


零件編號: 071298006
主要使用者
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


零件編號: 077006315
效能驗證
SignalVu
SignalVu Vector Signal Analysis Software

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.


零件編號: 077022305
程式設計師
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


零件編號: 071298005
主要使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006220
線上說明
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001023
程式設計師
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001022
程式設計師
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


零件編號: 077006314
效能驗證
SignalVu
SignalVu Vector Signal Analysis Software Programmer Manual

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.
零件編號: 077022304
程式設計師
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
零件編號: 077001809
使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001021
程式設計師
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
零件編號: 077022410
使用者
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001020
程式設計師
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006216
線上說明
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
零件編號: 075103804
服務
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001019
程式設計師
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
零件編號: 077022010
程式設計師
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

零件編號: 066186017
應用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164515
應用
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

零件編號: 066196756
應用
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093812
驅動程式
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179007
應用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

零件編號: 066186016
應用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

零件編號: 066186015
應用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

零件編號: 066186008
應用
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

零件編號: 066141832
韌體
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164512
應用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179006
應用
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

零件編號: 066166806
應用
Deployment Package for DPO5000/B, MSO5000/B - V10.8.1
Deployment Package for DPO5000/B, MSO5000/B. It contains the TekScope Firmware and compatible application software.

This software is a self-extracting executable consisting of the main oscilloscope software version 10.8.1 and the optional …

零件編號: 066141831
韌體
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

零件編號: 066180101
應用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164511
應用
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

零件編號: 066151905
應用
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

零件編號: 066170109
應用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

零件編號: 066142807
應用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164510
應用
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

零件編號: 066169913
應用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179005
應用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

零件編號: 066142805
應用
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

零件編號: 066189001
應用
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO7000C or DPO77002SX) - V10.5.1
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.This …

零件編號: 066141820
韌體
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093811
驅動程式
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164509
應用
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

零件編號: 066170708
韌體
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179002
應用
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

零件編號: 066152505
應用
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

零件編號: 066152504
應用
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

零件編號: 066170705
韌體
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

零件編號: 066141813
韌體
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

零件編號: 066186000
應用
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066126309
應用
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

零件編號: 066169801
應用
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

零件編號: 066140005
應用
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

零件編號: 066172104
應用
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164504
應用
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

零件編號: 066045315
驅動程式
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164503
應用
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

文件編號: 48W-61617-0
規格摘要表
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

文件編號: 55W-61401-2
應用摘要
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

文件編號: 46W-31080-7
選購指南
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

文件編號: 51W-60171-2
應用摘要
Tektronix Breaks Innovation Barrier AGAIN By Redefining Mid-Range Oscilloscopes
New 5 Series MSO Delivers 4, 6, or 8 Channels with FlexChannel Technology, Massive HD Capacitive Touch Display, Advanced UI, and Optional Windows OS Unprecedented Flexibility and Unmatched Visibility into Complex Embedded Systems _____ BEAVERTON …
新聞稿
Testing a New Switch Mode Power Supply Design Poster
Get a quick overview of the key measurements for verifying a new switch mode power supply (SMPS) design.  This poster shows key measurements, from verifying your prototype during initial startup, to optimizing switching loss and magnetic losses, to …

文件編號: 46W-60156-0
海報
TekVPI Probe Power Requirements on Digital Phosphor Oscilloscopes
This technical brief gives configuration information for using TekVPI probes with oscilloscopes that include the TekVPI probe interface. It gives the maximum internal probe power available from each oscilloscope series, and lists the power …

文件編號: 55W-28827-7
技術簡介
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …

文件編號: 55W-61095-0
應用摘要
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification.The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 …

零件編號: 066142803
應用
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164502
應用
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX - Win7 v1.1.0
TekExpress USB2: The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates the …

零件編號: 066166802
應用
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

零件編號: 066177100
應用
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

零件編號: 066177200
應用
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX, v3.2.8
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

零件編號: 066172000
應用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

零件編號: 066142801
應用
Tektronix Toolbars for Microsoft Office, V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for Microsoft Excel and Microsoft Word.This version of Toolbars requires OpenChoice TekVISA v4.0.0 or higher be preinstalled on the PC or Windows based Oscilloscope.The Toolbar …

零件編號: 066133202
公用程式
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX - Win7 v1.0.0
TekExpress USB2: The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates the …

零件編號: 066166800
應用
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093809
驅動程式
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

零件編號: 066142101
應用
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

零件編號: 066145300
應用
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

零件編號: 066077407
應用
MSO5000 and DPO5000 Series Firmware Upgrade Package - Windows 7 V6.1.3
This is the latest firmware for the MSO/DPO5000 Series products.

零件編號: 066126501
韌體
SignalExpress Tektronix Edition Step for DPO5000 and MSO5000 Series Oscilloscopes V1.1.1
This SignalExpress Step provides the capability to connect, control, acquire and log the data from the MSO5000 and DPO5000 Series instruments from the Signal Express Environment. The step has the ability to capture, transfer and save waveforms …

零件編號: 066118902
應用
Simplifying DC-DC Converter Characterization with a Series 2600B System SourceMeter SMU Instrument and an MSO/DPO5000 or DPO7000 Series Scope
Learn about techniques for precisely characterizing a DC-to-DC converter using a source/measure unit, including:EfficiencyLoad regulationLine regulation Techniques for using an oscilloscope to measure turn-on time and performing spectral analysis of …

文件編號: 1KW-60105-2
應用摘要
使用 DPOPWR 應用軟體執行電源量測和分析
      探索如何使用 Tektronix 示波器和 DPOPWR 電源分析軟體來執行許多常見電源量測。包括關於探測和特性分析電源和量測切換損耗、安全操作區、磁動力損耗、諧波分析和電能品質等實用資訊。

文件編號: 54W-23880-4
應用摘要
電源供應器量測與分析入門手冊
本入門手冊著重於以示波器和特定應用軟體,進行切換模式電源供應器設計的量測。

文件編號: 55T-18412-6
初階
適用於 100BASE-TX 的實體層相容性測試
本應用摘要介紹了各種實體層測試,包括振幅域、回波損耗、抖動和工作週期失真,以及使用 TDSET3 軟體的相容性測試。

文件編號: 61W-17381-3
應用摘要
Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing …

文件編號: 51W-60161-3
應用摘要
Wave Inspector® 簡化波形分析作業
現代的數位示波器可擷取大量資料,且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能,如何提供工具,讓您快速有效率地找出所要的答案。

文件編號: 48T-19039-9
應用摘要
MSO/DPO5000 系列與 Agilent MSO/DSO7000B 規格摘要表(英)
如串列觸發和解碼、波形導航與搜尋、波形擷取率、利用 MSO 的數位除錯等等重要功能的逐項比較。

文件編號: 48W-26199-1
競爭優勢
MSO/DPO5000 系列與 LeCroy WaveRunner Xi-A 規格摘要表(英)
如無限持續性、波形瀏覽和搜尋,以及使用混合訊號示波器的數位除錯等重要功能的逐項比較。

文件編號: 48W-26394-1
競爭優勢
使用 FastFrame™ 區段記憶體
本應用摘要將說明 Tektronix 高效能示波器功能的 FastFrame™ 分段式記憶體可讓您獲得良好的擷取資料品質,並有效利用記憶體,無需任何妥協。

文件編號: 55W-12112-2
應用摘要
MSO/DPO5000 Series vs. Agilent MSO/DSO-X 4000A Series
A side-by-side comparison of important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with MSO, and more.

文件編號: 3GW-29112-1
競爭優勢
MSO/DPO5000B 系列與 Agilent DSO 9000H 系列(英)
"審視高垂直解析度、被動探測、主要規格、視覺觸發和搜尋等等的逐項比較。 "

文件編號: 48W-30179-0
競爭優勢
更好的示波器量測
為了協助您更了解如何優化量測結果,本文的重點是:垂直解析度雜訊的影響可輕鬆應用的技術要點 

文件編號: 55W-29955-0
白皮書
MSO/DPO5000B Advanced Power Measurement and Analysis Solutions Fact Sheet
This 2-page fact sheet gives an overview of the power supply measurement capabilities of MSO/DPO5000B oscilloscopes with DPOPWR Power Measurement and Analysis Software.  It lists current and voltage probes that are well-suited for power supply …

文件編號: 3GW-23687-4
選購指南
2013年桌上型測試儀器產品型錄
提供了Tektronix桌上型儀器的最新產品細節和規格,包括:基礎和桌上型示波器、數位萬用電錶、電源供應器、計頻器/計時器和訊號產生器。

文件編號: 48T-25025-8
選購指南
MSO/DPO5000 系列與 LeCroy WavePro 7Zi 規格摘要表(英)
如無限持續性、波形瀏覽和搜尋,以及使用混合訊號示波器的數位除錯等重要功能的逐項比較。

文件編號: 48W-26395-1
競爭優勢
深入瞭解示波器
閱讀本入門手冊之後,您將能夠:描述示波器的工作方式描述各種示波器之間的差異描述電氣波形類型,瞭解基本示波器控制功能進行簡單的量測

文件編號: 03Z-8605-7
初階
讓您看到別人所不曾看到的世界:DPO 的原理。
數位螢光示波器 (DPO) 在示波器中自成一類,利用平行處理連續波形,以即時擷取、顯示、儲存和分析複雜訊號,使用訊號資訊三個維度 - 振幅、時間和隨時間變化的振幅分佈 - 從而產生強度等級顯示。詳讀此型錄以更瞭解 DPO 如何能節省您除錯程序的時間。

文件編號: 55W-14546-5
初階
MSO/DPO5000B Series vs. Teledyne LeCroy HDO4000 Series
A comparison of features and key specifications of Lecroy HDO4000 Series and the MSO/DPO5000B Series.

文件編號: 48W-29924-0
競爭優勢
瞭解和執行 USB 2.0 實體層測試
本應用摘要提供了 USB 2.0 實體層測試的概述,包括訊號品質、湧入電流檢查、下降和衰退的測試,以及電氣相容性測試。

文件編號: 55W-61400-0
應用摘要
Introduction to Video Measurements
In this application note, we demonstrate using a MSO/DPO5000, MDO/MSO/DPO4000 and MDO/MSO/DPO3000 Series Oscilloscope to make a variety of video measurements that are common in standard and high definition systems.

文件編號: 3GW-20975-2
應用摘要
Tektronix 探棒選擇指南
Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。

文件編號: 60W_14232_10
產生選擇器指南
Tektronix 推出TekScope Anywhere 以改善協作,提高生產力
全新的軟體解決方案將Tektronix示波器的可視性、分析和報告等功能擴展至個人電腦與平板電腦【2015年2月16日台北訊】全球領先的示波器製造商---Tektronix今日宣佈推出全新的軟體產品TekScope AnywhereTM,可將Tektronix示波器的可視性、分析和報告等功能擴展至Microsoft Windows PC、平板電腦和伺服器。工程師現在可以從示波器的分析工具中提出分析單元,並在實驗室之外執行更多的工作,並與世界各地的同事進行更有效率的協作 …
新聞稿
Visual Triggering
If dealing with complex signals, serial data or needing to capture signals from multiple channels then learn how Visual Trigger and Search (standard trigger feature) can quickly simply trigger setups and capture and locate events of interest.

文件編號: 48W-27803-3
技術簡介
Tektronix Extends Mid-Range Oscilloscope Leadership
New 2GHz MSO/DPO5000B Oscilloscopes Deliver Class-Leading Performance, Advanced Signal Analysis Capabilities; New Power Measurement ToolsBEAVERTON, Ore., Dec. 3, 2013 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today …
新聞稿
使用太克被動式探棒提高量測準確度和降低成本
本應用摘要介紹太克高頻寬、低電容被動式電壓探棒如何降低示波器使用者的總擁有成本、改善效能和量測準確度及節省使用者設定時間。大多數示波器標準配備的被動式電壓探棒都提供低成本通用型探測解決方案。一般來說,這些探棒缺乏主動式電壓探棒的效能,但堅固耐用且動態範圍寬,適合查看訊號。

文件編號: 51W-26294-6
應用摘要
能將示波器量測解析度提升高於 11 位元的工具
示波器量測解析度不只取決於類比/數位轉換器是否為 8 位元、10 位元或 12 位元裝置。整個系統 (從端到端) 皆須進行最佳化處理,以減輕雜訊的影響,並改善數位解析度。本應用摘要介紹了使用 Tektronix 示波器進行高解析度量測的相關探測注意事項、HiRes 取樣模式和其他訊號處理技術。

文件編號: 48W-27802-4
應用摘要
Tips and Tricks for Optimizing Low Power Measurements
This technical brief gives best practices for making voltage and current measurements with an oscilloscope, especially in low-power applications.  It describes techniques and advantages of differential voltage measurements, the risks of probe loading …

文件編號: 48W-28259-1
技術簡介
使用 Tektronix 示波器和選配軟體提供串列支援
Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。

文件編號: 55W-29028-13
選購指南
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply …

文件編號: 46W-60010-3
應用摘要
嵌入式系統設計中的低速串列匯流排除錯
當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。

文件編號: 48W-19040-21
應用摘要
使用混合訊號示波器進行數位除錯的訣竅
隨著電子產品變得更為快速複雜,其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計,以確保可靠的產品運作。問題發生時,設計人員需要迅速地深入瞭解問題的根源,以解決問題。藉由同時分析類比與數位呈現的訊號,更快速找出眾多數位問題的根源,這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。

文件編號: 3GT-24008-4
應用摘要
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

本手冊說明MSO/DPO70000DX 系列、MSO/DPO70000C 系列、DPO7000 系列、MSO5000B 系 列和DPO5000B 系列儀器的安裝和操作方式。
零件編號: 071298505
主要使用者
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
零件編號: 077069300
使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006217
線上說明
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
零件編號: 077007610
服務
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
零件編號: 077022408
使用者
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006214
線上說明
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
零件編號: 077024507
解除機密
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001018
程式設計師
RMD5000
Tektronix DPO & MSO 4000B Series and DPO & MSO5000/B Series Rackmount Kit Instructions

These instructions describe the installation of the rackmount kit to your standard bench-top instrument.
零件編號: 075102002
現場安裝指示
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in this manual.
零件編號: 071298004
主要使用者
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
零件編號: 077022407
使用者
TekExpress BRR
Automated Compliance Solution Read This First

This document provides important release information about the BroadR-Reach (BRR) Automoated Compliance Solution software.
零件編號: 077091100
使用者
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
零件編號: 077022005
程式設計師
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SigalVu Vector Signal Analysis Software.
零件編號: 077022405
使用者
Option SSD
MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000/B, and MSO5000/B Solid State Drive Installation Manual

This document provides instructions on installing the optional solid state hard drive for instrument models MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000, and MSO5000.
零件編號: 071285101
現場安裝指示
HCTEK54
Transit Case Instructions

This document provides information about the features and using the HCTEK54 transit case.
零件編號: 071282800
使用者
Probe and Accessories
Pouch Installation Instructions

Probe and Accessories Pouch Installation
零件編號: 071282900
現場安裝指示
MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, and DPO5000 Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document contains the specifications and performance verification for the instrument.
零件編號: 077006305
效能驗證
I have a DPO5000/B series scope . Is it possible to add digital channel capability without having to purchase a new instrument?
Yes. Simply order a DPO-UP with option MSOE.The MSOE upgrade option includes a P6616 16-channel digital probe with accessories and software option key to enable digital channel functionality.
常見問答集 ID58361
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
常見問答集 ID69176
I am experiencing a SPC failure on DPO/MSO4000B series oscilloscope when I try to run SPC.   What is causing SPC to fail.
If the instrument is running firmware 7.2.0 or 7.3.0 and you have 4 traces on sceen that are postioned away from zero, running SPC could fail. If you press the front panel user "Default Setup", run SPC and it passes, upgrading the instrument to FW 7 …
常見問答集 ID69516
I have an MSO5204 and noticed the MagniVu feature. Can you explain how MagniVu works?
The MagniVu acquisition is a parallel process to the main acquisition, and the record is acquired for every Main acquisition. MagniVu can be displayed at any time to achieve a higher resolution view of the data.MSO 5000 series oscilloscopes use …
常見問答集 ID58381
How do I update the USB UTI drivers on my MSO/DPO5000/B?
There are two seperate parts to this, first is flashing the USB firmware, the second one is the windows driver.Part One: Before installing the TekUTI drivers, the scope needs to be prepared for the update. If TekScope is running, minimize it. The …
常見問答集 ID69271
Do you have a detailed application note on how to use DPO/MSO5000/B Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO/DPO5000/B Series Lab Exercise Book for more details.
常見問答集 ID58166
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
常見問答集 ID467706
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
常見問答集 ID782296
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
常見問答集 ID69181
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
常見問答集 ID780986
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
常見問答集 ID60251
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
常見問答集 ID58421
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
常見問答集 ID59621
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
常見問答集 ID60306
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
常見問答集 ID64756
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
常見問答集 ID470416
What are the maximum power draw ratings for the MSO/DPO5000/B Series oscilloscopes TEKVPI probes?
The max draw for the MSO/DPO5000/B Series TekVPI channels are 15W. With the External power adapter all channels can support any active VPI probe. This adapter is part 19-7465-xx. Please see the table link below for all the information regarding probe …
常見問答集 ID58656
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
常見問答集 ID474266
Why isn’t the TPP1000 (Tektronix Passive Probe 1GHz) compatible with my scope?
Short answer is that if your scope doesn’t have the notched key that allows the probe to connect, then the TPP probe requires a different termination resistance than what your scope can provide. Long answer is that traditionally, passive probes …
常見問答集 ID467701
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
常見問答集 ID471576
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
常見問答集 ID56016
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
常見問答集 ID69186
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
常見問答集 ID247211
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
常見問答集 ID66181
When should I use MagniVu on my oscilloscope?
MagniVu allows you to have higher resolution to accurately determine edge placement on your digital data. It helps you to make precise timing measurements on digital edges. On the MSO/MDO4000/B/C and MSO5000/B Series, you can see up to 32 times more …
常見問答集 ID63886
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
常見問答集 ID64571
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
常見問答集 ID56456
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
常見問答集 ID64781
MSO5000/DPO5000/DPO7000 Series: Is the hard drive removable?
Yes. The MSO5000/DPO5000 hard drive is removable from the right side of the scope. Yes. The DPO7000/DPO7000C hard drive is removable from the back of the scope.
常見問答集 ID55926
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
常見問答集 ID63266
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
常見問答集 ID60156
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.   
常見問答集 ID63516
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
常見問答集 ID61606
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
常見問答集 ID62256
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the …
常見問答集 ID69346
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
常見問答集 ID64751
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
常見問答集 ID782291
MSO5000/DPO5000/DPO7000 Series: How compatible is the GPIB command set with the current TDS5000 and TDS7000 instruments?
The same GPIB grammar is used. Differences in the horizontal time base model and new product features might require some changes in the programs that were developed for older scopes.
常見問答集 ID55921
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
常見問答集 ID64561
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
常見問答集 ID64766
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
常見問答集 ID467516
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
常見問答集 ID64706
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
常見問答集 ID64826
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
常見問答集 ID58571
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
常見問答集 ID66221
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
常見問答集 ID64726
I want to use anti-virus software on my Windows-based oscilloscope. Will it slow down the processing or give me faulty measurement results?
Anti-virus software should not cause any errors in acquiring data or making measurements. The primary effect will be that operations done by the host process may take a little longer. Running anti-virus software on any PC has an effect on processing …
常見問答集 ID58441
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64791
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
常見問答集 ID64771
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
常見問答集 ID64691
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/  
常見問答集 ID59716
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
常見問答集 ID60041
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
常見問答集 ID56226
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.   For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
常見問答集 ID59166
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
常見問答集 ID60416
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
常見問答集 ID64516
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
常見問答集 ID62606
What is the maximum digital channel record length for an MSO5000 Series oscilloscope?
The maximum digital channel record length is 40 Mpoints. The actual digital channel record length depends upon many parameters:The memory option must support desired record length. Therefore, to get 40M digital record length, the instrument will need …
常見問答集 ID58821
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
常見問答集 ID69266
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
常見問答集 ID66226
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
常見問答集 ID69386
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
常見問答集 ID64776
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
常見問答集 ID64251
Differences between the DPO/MSO5000B and the DPO/MSO5000 (nonB) series.
DPO/MSO5000B Product Changes: Solid State Drive now standard no HDD available Standard record length doubled to (25M/ch) on analog and digital channels Interleaves to 50 M on 1 or 2 channels on 2 GHz and 1 GHz models Some capabilities that are …
常見問答集 ID467561
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
常見問答集 ID64666
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
常見問答集 ID468146
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
常見問答集 ID64656
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
常見問答集 ID63686
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64796
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
常見問答集 ID64761
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
常見問答集 ID471231
混合訊號示波器
以現今更快的資料速率和更有限的時序邊際進行設計時,需使用具備優異訊號擷取效能與分析能力的示波器。Tektronix MSO/DPO5000B 系列示波器為工作台或實驗室提供極佳的訊號完整性 (2 GHz 頻寬和 10 GS/秒取樣率),以及進階分析和數學功能。直接在示波器上執行 Windows® 分析軟體。指向並按一下視觸觸發,可讓您輕鬆擷取複雜訊號。MSO 機型包含 16 個數位時序通道 (所有機型皆可安裝,藉以對常用的串列通訊協定進行解碼),讓您能全面檢視系統。

文件編號: 48T-29560-9
Datasheet
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


零件編號: 077022411
使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


零件編號: 077001025
程式設計師
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


零件編號: 077022011
程式設計師
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


零件編號: 077001810
使用者
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


零件編號: 071298006
主要使用者
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


零件編號: 077006315
效能驗證
SignalVu
SignalVu Vector Signal Analysis Software

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.


零件編號: 077022305
程式設計師
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


零件編號: 071298005
主要使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006220
線上說明
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001023
程式設計師
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001022
程式設計師
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


零件編號: 077006314
效能驗證
SignalVu
SignalVu Vector Signal Analysis Software Programmer Manual

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.
零件編號: 077022304
程式設計師
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
零件編號: 077001809
使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001021
程式設計師
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
零件編號: 077022410
使用者
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001020
程式設計師
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006216
線上說明
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
零件編號: 075103804
服務
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001019
程式設計師
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
零件編號: 077022010
程式設計師
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

零件編號: 066186017
應用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164515
應用
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

零件編號: 066196756
應用
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093812
驅動程式
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179007
應用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

零件編號: 066186016
應用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

零件編號: 066186015
應用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

零件編號: 066186008
應用
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

零件編號: 066141832
韌體
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164512
應用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179006
應用
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

零件編號: 066166806
應用
Deployment Package for DPO5000/B, MSO5000/B - V10.8.1
Deployment Package for DPO5000/B, MSO5000/B. It contains the TekScope Firmware and compatible application software.

This software is a self-extracting executable consisting of the main oscilloscope software version 10.8.1 and the optional …

零件編號: 066141831
韌體
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

零件編號: 066180101
應用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164511
應用
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

零件編號: 066151905
應用
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

零件編號: 066170109
應用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

零件編號: 066142807
應用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164510
應用
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

零件編號: 066169913
應用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179005
應用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

零件編號: 066142805
應用
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

零件編號: 066189001
應用
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO7000C or DPO77002SX) - V10.5.1
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.This …

零件編號: 066141820
韌體
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093811
驅動程式
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164509
應用
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

零件編號: 066170708
韌體
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066179002
應用
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

零件編號: 066152505
應用
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

零件編號: 066152504
應用
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

零件編號: 066170705
韌體
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

零件編號: 066141813
韌體
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

零件編號: 066186000
應用
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

零件編號: 066126309
應用
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

零件編號: 066169801
應用
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

零件編號: 066140005
應用
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

零件編號: 066172104
應用
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164504
應用
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

零件編號: 066045315
驅動程式
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164503
應用
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

文件編號: 51W-60171-2
應用摘要
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

文件編號: 55W-61401-2
應用摘要
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

文件編號: 46W-31080-7
選購指南
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

文件編號: 48W-61617-0
規格摘要表
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …

文件編號: 55W-61095-0
應用摘要
Tektronix Breaks Innovation Barrier AGAIN By Redefining Mid-Range Oscilloscopes
New 5 Series MSO Delivers 4, 6, or 8 Channels with FlexChannel Technology, Massive HD Capacitive Touch Display, Advanced UI, and Optional Windows OS Unprecedented Flexibility and Unmatched Visibility into Complex Embedded Systems _____ BEAVERTON …
新聞稿
TekVPI Probe Power Requirements on Digital Phosphor Oscilloscopes
This technical brief gives configuration information for using TekVPI probes with oscilloscopes that include the TekVPI probe interface. It gives the maximum internal probe power available from each oscilloscope series, and lists the power …

文件編號: 55W-28827-7
技術簡介
Testing a New Switch Mode Power Supply Design Poster
Get a quick overview of the key measurements for verifying a new switch mode power supply (SMPS) design.  This poster shows key measurements, from verifying your prototype during initial startup, to optimizing switching loss and magnetic losses, to …

文件編號: 46W-60156-0
海報
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification.The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 …

零件編號: 066142803
應用
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

零件編號: 066164502
應用
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX - Win7 v1.1.0
TekExpress USB2: The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates the …

零件編號: 066166802
應用
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

零件編號: 066177100
應用
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

零件編號: 066177200
應用
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX, v3.2.8
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

零件編號: 066172000
應用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

零件編號: 066142801
應用
Tektronix Toolbars for Microsoft Office, V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for Microsoft Excel and Microsoft Word.This version of Toolbars requires OpenChoice TekVISA v4.0.0 or higher be preinstalled on the PC or Windows based Oscilloscope.The Toolbar …

零件編號: 066133202
公用程式
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX - Win7 v1.0.0
TekExpress USB2: The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates the …

零件編號: 066166800
應用
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093809
驅動程式
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

零件編號: 066142101
應用
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

零件編號: 066145300
應用
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

零件編號: 066077407
應用
MSO5000 and DPO5000 Series Firmware Upgrade Package - Windows 7 V6.1.3
This is the latest firmware for the MSO/DPO5000 Series products.

零件編號: 066126501
韌體
SignalExpress Tektronix Edition Step for DPO5000 and MSO5000 Series Oscilloscopes V1.1.1
This SignalExpress Step provides the capability to connect, control, acquire and log the data from the MSO5000 and DPO5000 Series instruments from the Signal Express Environment. The step has the ability to capture, transfer and save waveforms …

零件編號: 066118902
應用
更好的示波器量測
為了協助您更了解如何優化量測結果,本文的重點是:垂直解析度雜訊的影響可輕鬆應用的技術要點 

文件編號: 55W-29955-0
白皮書
MSO/DPO5000B Advanced Power Measurement and Analysis Solutions Fact Sheet
This 2-page fact sheet gives an overview of the power supply measurement capabilities of MSO/DPO5000B oscilloscopes with DPOPWR Power Measurement and Analysis Software.  It lists current and voltage probes that are well-suited for power supply …

文件編號: 3GW-23687-4
選購指南
MSO/DPO5000 Series vs. Agilent MSO/DSO-X 4000A Series
A side-by-side comparison of important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with MSO, and more.

文件編號: 3GW-29112-1
競爭優勢
MSO/DPO5000 系列與 Agilent MSO/DSO7000B 規格摘要表(英)
如串列觸發和解碼、波形導航與搜尋、波形擷取率、利用 MSO 的數位除錯等等重要功能的逐項比較。

文件編號: 48W-26199-1
競爭優勢
MSO/DPO5000B 系列與 Agilent DSO 9000H 系列(英)
"審視高垂直解析度、被動探測、主要規格、視覺觸發和搜尋等等的逐項比較。 "

文件編號: 48W-30179-0
競爭優勢
MSO/DPO5000 系列與 LeCroy WaveRunner Xi-A 規格摘要表(英)
如無限持續性、波形瀏覽和搜尋,以及使用混合訊號示波器的數位除錯等重要功能的逐項比較。

文件編號: 48W-26394-1
競爭優勢
瞭解和執行 USB 2.0 實體層測試
本應用摘要提供了 USB 2.0 實體層測試的概述,包括訊號品質、湧入電流檢查、下降和衰退的測試,以及電氣相容性測試。

文件編號: 55W-61400-0
應用摘要
深入瞭解示波器
閱讀本入門手冊之後,您將能夠:描述示波器的工作方式描述各種示波器之間的差異描述電氣波形類型,瞭解基本示波器控制功能進行簡單的量測

文件編號: 03Z-8605-7
初階
Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing …

文件編號: 51W-60161-3
應用摘要
使用 DPOPWR 應用軟體執行電源量測和分析
      探索如何使用 Tektronix 示波器和 DPOPWR 電源分析軟體來執行許多常見電源量測。包括關於探測和特性分析電源和量測切換損耗、安全操作區、磁動力損耗、諧波分析和電能品質等實用資訊。

文件編號: 54W-23880-4
應用摘要
電源供應器量測與分析入門手冊
本入門手冊著重於以示波器和特定應用軟體,進行切換模式電源供應器設計的量測。

文件編號: 55T-18412-6
初階
2013年桌上型測試儀器產品型錄
提供了Tektronix桌上型儀器的最新產品細節和規格,包括:基礎和桌上型示波器、數位萬用電錶、電源供應器、計頻器/計時器和訊號產生器。

文件編號: 48T-25025-8
選購指南
MSO/DPO5000 系列與 LeCroy WavePro 7Zi 規格摘要表(英)
如無限持續性、波形瀏覽和搜尋,以及使用混合訊號示波器的數位除錯等重要功能的逐項比較。

文件編號: 48W-26395-1
競爭優勢
MSO/DPO5000B Series vs. Teledyne LeCroy HDO4000 Series
A comparison of features and key specifications of Lecroy HDO4000 Series and the MSO/DPO5000B Series.

文件編號: 48W-29924-0
競爭優勢
使用 FastFrame™ 區段記憶體
本應用摘要將說明 Tektronix 高效能示波器功能的 FastFrame™ 分段式記憶體可讓您獲得良好的擷取資料品質,並有效利用記憶體,無需任何妥協。

文件編號: 55W-12112-2
應用摘要
Wave Inspector® 簡化波形分析作業
現代的數位示波器可擷取大量資料,且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能,如何提供工具,讓您快速有效率地找出所要的答案。

文件編號: 48T-19039-9
應用摘要
適用於 100BASE-TX 的實體層相容性測試
本應用摘要介紹了各種實體層測試,包括振幅域、回波損耗、抖動和工作週期失真,以及使用 TDSET3 軟體的相容性測試。

文件編號: 61W-17381-3
應用摘要
讓您看到別人所不曾看到的世界:DPO 的原理。
數位螢光示波器 (DPO) 在示波器中自成一類,利用平行處理連續波形,以即時擷取、顯示、儲存和分析複雜訊號,使用訊號資訊三個維度 - 振幅、時間和隨時間變化的振幅分佈 - 從而產生強度等級顯示。詳讀此型錄以更瞭解 DPO 如何能節省您除錯程序的時間。

文件編號: 55W-14546-5
初階
Simplifying DC-DC Converter Characterization with a Series 2600B System SourceMeter SMU Instrument and an MSO/DPO5000 or DPO7000 Series Scope
Learn about techniques for precisely characterizing a DC-to-DC converter using a source/measure unit, including:EfficiencyLoad regulationLine regulation Techniques for using an oscilloscope to measure turn-on time and performing spectral analysis of …

文件編號: 1KW-60105-2
應用摘要
Introduction to Video Measurements
In this application note, we demonstrate using a MSO/DPO5000, MDO/MSO/DPO4000 and MDO/MSO/DPO3000 Series Oscilloscope to make a variety of video measurements that are common in standard and high definition systems.

文件編號: 3GW-20975-2
應用摘要
Tektronix 推出TekScope Anywhere 以改善協作,提高生產力
全新的軟體解決方案將Tektronix示波器的可視性、分析和報告等功能擴展至個人電腦與平板電腦【2015年2月16日台北訊】全球領先的示波器製造商---Tektronix今日宣佈推出全新的軟體產品TekScope AnywhereTM,可將Tektronix示波器的可視性、分析和報告等功能擴展至Microsoft Windows PC、平板電腦和伺服器。工程師現在可以從示波器的分析工具中提出分析單元,並在實驗室之外執行更多的工作,並與世界各地的同事進行更有效率的協作 …
新聞稿
Tektronix 探棒選擇指南
Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。

文件編號: 60W_14232_10
產生選擇器指南
Tektronix Extends Mid-Range Oscilloscope Leadership
New 2GHz MSO/DPO5000B Oscilloscopes Deliver Class-Leading Performance, Advanced Signal Analysis Capabilities; New Power Measurement ToolsBEAVERTON, Ore., Dec. 3, 2013 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today …
新聞稿
能將示波器量測解析度提升高於 11 位元的工具
示波器量測解析度不只取決於類比/數位轉換器是否為 8 位元、10 位元或 12 位元裝置。整個系統 (從端到端) 皆須進行最佳化處理,以減輕雜訊的影響,並改善數位解析度。本應用摘要介紹了使用 Tektronix 示波器進行高解析度量測的相關探測注意事項、HiRes 取樣模式和其他訊號處理技術。

文件編號: 48W-27802-4
應用摘要
使用太克被動式探棒提高量測準確度和降低成本
本應用摘要介紹太克高頻寬、低電容被動式電壓探棒如何降低示波器使用者的總擁有成本、改善效能和量測準確度及節省使用者設定時間。大多數示波器標準配備的被動式電壓探棒都提供低成本通用型探測解決方案。一般來說,這些探棒缺乏主動式電壓探棒的效能,但堅固耐用且動態範圍寬,適合查看訊號。

文件編號: 51W-26294-6
應用摘要
Tips and Tricks for Optimizing Low Power Measurements
This technical brief gives best practices for making voltage and current measurements with an oscilloscope, especially in low-power applications.  It describes techniques and advantages of differential voltage measurements, the risks of probe loading …

文件編號: 48W-28259-1
技術簡介
Visual Triggering
If dealing with complex signals, serial data or needing to capture signals from multiple channels then learn how Visual Trigger and Search (standard trigger feature) can quickly simply trigger setups and capture and locate events of interest.

文件編號: 48W-27803-3
技術簡介
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply …

文件編號: 46W-60010-3
應用摘要
使用 Tektronix 示波器和選配軟體提供串列支援
Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。

文件編號: 55W-29028-13
選購指南
使用混合訊號示波器進行數位除錯的訣竅
隨著電子產品變得更為快速複雜,其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計,以確保可靠的產品運作。問題發生時,設計人員需要迅速地深入瞭解問題的根源,以解決問題。藉由同時分析類比與數位呈現的訊號,更快速找出眾多數位問題的根源,這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。

文件編號: 3GT-24008-4
應用摘要
嵌入式系統設計中的低速串列匯流排除錯
當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。

文件編號: 48W-19040-21
應用摘要
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

本手冊說明MSO/DPO70000DX 系列、MSO/DPO70000C 系列、DPO7000 系列、MSO5000B 系 列和DPO5000B 系列儀器的安裝和操作方式。
零件編號: 071298505
主要使用者
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
零件編號: 077069300
使用者
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006217
線上說明
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
零件編號: 077007610
服務
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
零件編號: 077022408
使用者
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
零件編號: 077006214
線上說明
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
零件編號: 077024507
解除機密
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
零件編號: 077001018
程式設計師
RMD5000
Tektronix DPO & MSO 4000B Series and DPO & MSO5000/B Series Rackmount Kit Instructions

These instructions describe the installation of the rackmount kit to your standard bench-top instrument.
零件編號: 075102002
現場安裝指示
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in this manual.
零件編號: 071298004
主要使用者
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
零件編號: 077022407
使用者
TekExpress BRR
Automated Compliance Solution Read This First

This document provides important release information about the BroadR-Reach (BRR) Automoated Compliance Solution software.
零件編號: 077091100
使用者
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
零件編號: 077022005
程式設計師
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SigalVu Vector Signal Analysis Software.
零件編號: 077022405
使用者
Option SSD
MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000/B, and MSO5000/B Solid State Drive Installation Manual

This document provides instructions on installing the optional solid state hard drive for instrument models MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000, and MSO5000.
零件編號: 071285101
現場安裝指示
HCTEK54
Transit Case Instructions

This document provides information about the features and using the HCTEK54 transit case.
零件編號: 071282800
使用者
Probe and Accessories
Pouch Installation Instructions

Probe and Accessories Pouch Installation
零件編號: 071282900
現場安裝指示
MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, and DPO5000 Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document contains the specifications and performance verification for the instrument.
零件編號: 077006305
效能驗證