MSO4000/DPO4000
MSO/DPO4000B 系列已由 MDO4000C 系列取代。 MDO4000C 可設定為數位螢光示波器 (DPO) 或混合訊號示波器 (MSO) 以符合您的應用需求。
深入瞭解 MDO4000C 系列。
多功能混合訊號設計除錯工具。
MSO/DPO4000B 混合訊號示波器系列具備高達 1 GHz 的頻寬與 5 GS/秒取樣率，提供必要效能，可提供檢視快速變化訊號細節所需的效能。由於多達 20 個通道，您可以使用一台儀器，同時分析類比訊號和數位訊號。再結合自動串列和並列匯流排分析、創新 Wave Inspector® 控制，以及自動 電源量測功能 ，MSO/DPO4000B 系列為您提供了所需的多功能工具，可簡化並加速複雜設計的除錯工作。
正在尋找使用 100 MHz、350 MHz、500 MHz 或 1 GHz 的 MSO4000B 系列嗎？ 您將會發現 MDO4000B 系列能以一代三。這些示波器具有內建的頻譜分析儀，不需額外購買。 立即深入瞭解這些產品 。
Features |
Benefits |
| 2 or 4 analog and 16 digital channels | Analyze analog and digital signals on a single instrument for system-level troubleshooting of complex designs. |
| Digital phosphor display | Quickly discover glitches and infrequent events with a greater than 340,000 wfm/s waveform capture rate and intensity-graded display. |
| Complete set of triggers | Rapidly capture signal anomalies with over 125 available trigger combinations, including setup/hold, serial packet content and parallel data. |
| Wave Inspector® controls | Easily search, mark and navigate long record lengths to find all occurrences of your event. |
| Automated Measurements | Simplify analysis of your device with 42 automated measurements, FFT analysis, measurement statistics, waveform histograms, and advanced waveform math. |
| Parallel bus triggering and analysis (MSO Series) | Quickly debug your parallel bus with automated trigger, decode and search. Capture fast transitions with timing resolution up to 60.6 ps. |
| Serial triggering and analysis (optional) | Quickly debug common serial buses with automated trigger, decode and search – I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, I2S/LJ/RJ/TDM, and MIL-STD-1553. |
| Power analysis (optional) | Achieve fast, accurate results with integrated automated power measurements. |
| Low-capacitance passive voltage probing | Four probes with industry-best 4pF capacitive loading and up to 1 GHz bandwidth are included standard to ensure accurate measurements |
配件
ACD4000B
產品規格表
說明
檢視 產品規格表
軟質提袋
配件
HCTEK54
產品規格表
說明
檢視 產品規格表
硬質攜帶箱
配件
NEX-HD2HEADER
產品規格表
說明
檢視 產品規格表
NEXUS TECHNOLOGY, INC. Mictor 至連接器接腳轉接器
配件
RMD5000
產品規格表
說明
檢視 產品規格表
框架組件
配件
TPA-BNC
產品規格表
說明
TekProbe-BNC 至 TekVPI 的探棒轉接器
| 產品規格表 | 配件 | 說明 |
|---|---|---|
| ACD4000B | 軟質提袋 | |
| HCTEK54 | 硬質攜帶箱 | |
| NEX-HD2HEADER | NEXUS TECHNOLOGY, INC. Mictor 至連接器接腳轉接器 | |
| RMD5000 | 框架組件 | |
| 檢視 產品規格表 | TPA-BNC | TekProbe-BNC 至 TekVPI 的探棒轉接器 |
| 產品規格表 | 軟體套件 / 軟體選項 | 說明 | 配置與報價 |
|---|
Gold Care
| Data Sheet | Plan | Description | Shop Online or Learn More |
|---|---|---|---|
| View Datasheet | G3 |
Gold Care Service – 3 Years (Expedited repair for all product failures, access to loaner, priority customer service) |
Learn More |
| View Datasheet | G5 |
Gold Care Service – 5 Years (Expedited repair for all product failures, access to loaner, priority customer service) |
Learn More |
Silver Care (Extended Warranty)
| Data Sheet | Plan | Description | Shop Online or Learn More |
|---|---|---|---|
| View Datasheet | R5 |
Silver Care Repair Service – 5 Years (Includes warranty) |
Learn More |
| View Datasheet | SILV600 |
Silver Care Repair Service Package – 5 Years (Includes warranty) |
Learn More |
Calibration
| Data Sheet | Plan | Description | Shop Online or Learn More |
|---|---|---|---|
| View Datasheet | C3 |
Calibration Service – 3 Years |
Learn More |
| View Datasheet | C5 |
Calibration Service – 5 Years |
Learn More |
|
KickStart Instrument Control Software Version 2.2.1 (Windows 10, 8, 7 compatible)
KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments.
Key Features
• Save time by automating data collection of millions of readings.
• Set up a multi-instrument test with the ability to …
零件編號： KICKSTART-2.2.1 |
應用 | |
|
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA -> OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
|
常見問答集 ID66181 | |
|
How do I clear my memory using TekSecure on a MSO/DPO/MDO4000 Series oscilloscope?
This procedure for clearing the memory on oscilloscope can be applied to the DPO/MSO/MDO4000, DPO/MSO3000 and DPO/MSO2000 Series oscilloscope families. By clearing the memory you will lose all saved reference waveforms, saved setups and all other …
|
常見問答集 ID64686 | |
|
How do I use the Save and Recall functionality of the MDO4000 series oscilloscope?
To save a screen image, go to the Save/Recall menu at the bottom of the scope. From there select the Save Screen Image softkey. This will pop up a new window with saving options. Saving a screen image requires an external memory device, such as a USB …
|
常見問答集 ID69156 | |
|
When should I use MagniVu on my oscilloscope?
MagniVu allows you to have higher resolution to accurately determine edge placement on your digital data. It helps you to make precise timing measurements on digital edges. On the MSO/MDO4000/B/C and MSO5000/B Series, you can see up to 32 times more …
|
常見問答集 ID63886 | |
|
How do I erase and declassify an MSO/DPO2000, MSO/DPO/MDO3000, and MSO/DPO/MDO4000 Series oscilloscope?
This example will show you how to declassify the MDO4000/B/C Series oscilloscope. This procedure also applies to the MSO/DPO4000/B, MSO/DPO/MDO3000, and the MSO/DPO2000/B series of oscilloscope.The first step in the declassification process is …
|
常見問答集 ID66231 | |
|
Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?
Yes, almost all work from all legacy MSO/DPO/MDO4000/B series scopes. The only one that has some requirements is the MDO4TRIG which requires a spectrum analyzer option MDO4SA3 or MDO4SA6 be installed on your MDO4000C before RF triggering capabilities …
|
常見問答集 ID72146 | |
|
My Tektronix oscilloscope uses the Linux operating system. Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the …
|
常見問答集 ID64866 | |
|
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
|
常見問答集 ID64666 | |
|
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right?
The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
|
常見問答集 ID58571 | |
|
Will the P6516 Logic Probe work on my MSO4000B, MDO4000B and MDO4000C Series oscilloscopes?
The P6516 logic probe was only used with the original MSO4000 series. For the subsequent MSO4000B, MDO4000B and MDO4000C Series oscilloscopes, the P6516 was replaced by the P6616 logic probe.
The P6616 logic probe will not work on the original …
|
常見問答集 ID246206 | |
|
How do I setup my DPO/MSO4000B to NI Signal Express?
Please click on video below.
|
常見問答集 ID64606 | |
|
How do I mount a network drive on my MDO3000 or MDO4000C oscilloscope?
This procedure also applies to the DPO/MSO/MDO4000/4000B series oscilloscopes.
Note: This Mount a network drive will not work with a direct (peer-to-peer) connection. Must go through your local DNS server.
To begin, press the “Menu” button in the …
|
常見問答集 ID66201 | |
|
What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A.From a mechanical perspective, there are some differences:- Sharper tip- Ground …
|
常見問答集 ID64441 | |
|
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.
|
常見問答集 ID63516 | |
|
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
|
常見問答集 ID64756 | |
|
How do I configure the LAN settings on an MDO4000C series oscilloscope?
This procedure also applies to the DPO/MSO/MDO4000B series oscilloscopes. As it stands now, all 4000 series scopes require a live network connection be made on the scope in order to set and save LAN settings. If the scope does not have a network …
|
常見問答集 ID66236 | |
|
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
|
常見問答集 ID64781 | |
|
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
|
常見問答集 ID64776 | |
|
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.
For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
|
常見問答集 ID59166 | |
|
I could not find any information regarding the increase in bits in resolution for HiRes mode. Is there any information available?
The increase in bits in resolution depends on the decimation ratio. The decimation ratio can be determined as follows:D = MFs / FsMFs is the maximum non-interleaved sampling frequency of the scope. For example: 5 GS/s for the DPO4104B or 2.5 GS/s …
|
常見問答集 ID55421 | |
|
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
|
常見問答集 ID64791 | |
|
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
|
常見問答集 ID64796 | |
|
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.
Prerequisites
1. PC equipped with Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
|
常見問答集 ID474266 | |
|
Why does the Tkdpo2k3k4k_ReadWaveform() function in the Tkdpo2k3k4k IVI-C driver time out every time I call it when I am connected to the instrument via Ethernet? The function call works fine over USB, but over Ethernet it always times out.
The Tkdpo2k3k4k_ReadWaveform() function makes use of the Service Request Event in VISA so the scope can notify the driver when it has completed its acquisition and the waveform data is ready to be fetched as opposed to the driver polling the scope …
|
常見問答集 ID72221 | |
|
Do you have a detailed application note on how to use DPO/MSO4000B Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO4000B / DPO4000B Series Lab Exercise Book for more details. This lab manual states many walk through labs that will help you under many aspects of how to use the oscilloscopes. Just download the attached lab manual.
Note: Many …
|
常見問答集 ID58161 | |
|
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
|
常見問答集 ID64751 | |
|
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE
Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
|
常見問答集 ID69186 | |
|
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
|
常見問答集 ID60306 | |
|
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use.
Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
|
常見問答集 ID56016 | |
|
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
|
常見問答集 ID56226 | |
|
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed.
On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen.
Along the left side of the screen you will see a marker …
|
常見問答集 ID247211 | |
|
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed. What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair. A few things you can do before sending in for repair:
Make sure all inputs (probes and cables) are removed from all the channel inputs …
|
常見問答集 ID59621 | |
|
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
|
常見問答集 ID56456 | |
|
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's. Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
|
常見問答集 ID60041 | |
|
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
|
常見問答集 ID64656 | |
|
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
|
常見問答集 ID64706 | |
|
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.
You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
|
常見問答集 ID69176 | |
|
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE
In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
|
常見問答集 ID69181 | |
|
What are the primary differences between the DPO/MSO4000B, MDO4000, MDO4000B, and MDO4000C?
The 4000 Series Mixed Domain Oscilloscopes (MDO) continues to be the only true RF/Time domain syncronized instrument on the market. The major differences between revisions of the DPO/MSO/MDO4000 Series are described below. Please note the MDO4000C …
|
常見問答集 ID72111 | |
|
What probe interface does my oscilloscope have?
Oscilloscope series
Probe interface
CSA7000/CSA7000B
TekConnect
DPO2000
TekVPI
DPO3000
…
|
常見問答集 ID64251 | |
|
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
|
常見問答集 ID60416 | |
|
What feature does the DPO4BND included?
DPO4BND includes the features for the following modules …
|
常見問答集 ID72101 | |
|
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
|
常見問答集 ID64726 | |
|
What rackmount does my scope use?
Oscilloscope Family
Rackmount
TDS1000/TDS2000
RM2000
TDS1000B/TDS2000B/TDS2000C
RM2000B
TPS2000/TPS2000B
No Rackmount - Strap hanger 343-1689 …
|
常見問答集 ID64571 | |
|
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
|
常見問答集 ID66221 | |
|
How do I utilize the measurement features on a DPO/MSO/MDO3000 and DPO/MSO/MDO4000 Series oscilloscope?
The Measurements are the same as the DPO/MSO2000 Series scopes. By going into the measurement menu you can add and remove up to 4 measurements. You can gate the measurements which allows you to only measure the part of the captured waveform that you …
|
常見問答集 ID64651 | |
|
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are:
After the oscilloscope has been powered on and has warmed up for 20 minutes or more.
If the temperature has changed more than 5 degrees C since the last SPC was …
|
常見問答集 ID60156 | |
|
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
|
常見問答集 ID64761 | |
|
How do I run a Signal Path Compensation (SPC) on an DPO/MSO/MDO4000 Series oscilloscope?
Signal Path Compensation (SPC) should be run anytime you are getting DC offsets in your signals, or your scope has moved locations and might have changed temperature, or if it's been more then a month since your last SPC. This is a standard procedure …
|
常見問答集 ID64681 | |
|
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
|
常見問答集 ID64691 | |
|
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level. For more …
|
常見問答集 ID62256 | |
|
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
|
常見問答集 ID63686 | |
|
Are the DPO2AUTO+ DPO2COMP+ and DPO2EMBD Application Modules licensed to a specific MSO2000 or DPO2000 Series oscilloscope serial number?
Are the DPO3AERO+ DPO3AUDIO+ DPO3AUTO+ DPO3COMP+ DPO3EMBD+ DPO3FLEX+ DPO3PWR+ and DPO3VID Application Modules licensed to a specific MSO3000 or DPO3000 Series oscilloscope serial number?
Are the DPO4AERO+ DPO4AUDIO+ DPO4AUTO+ DPO4AUTOMAX+ DPO4COMP+ DPO4EMBD+ DPO4ENET+ DPO4USB+ DPO4LMT+ DPO4PWR+ MDO4TRIG+ and DPO4VID Application Modules licensed to a specific MDO4000, MSO4000 or DPO4000 Series oscilloscope serial number?
The application modules are not licensed to a specific oscilloscope serial number and can be swapped between the various models within the oscilloscope series.
|
常見問答集 ID55201 | |
|
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/
|
常見問答集 ID59716 | |
|
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
|
常見問答集 ID60251 | |
|
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.
K4000 K420 K475 More information can …
|
常見問答集 ID64561 | |
|
Can the P6139B be used on scopes that shipped with a P6139A? What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A. From a mechanical perspective, there are some differences: - Sharper tip …
|
常見問答集 ID58111 | |
|
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
|
常見問答集 ID62606 | |
|
What are the differences between the MSO4000B/DPO4000B Series and the MSO4000/DPO4000 Series?
Please see the attached PDF for the differences between the MSO4000B/DPO4000B and the MSO4000/DPO4000.
For information comparing the MSO/DPO4000B to the MDO4000/B/C Series please use this FAQ >> CLICK HERE
|
常見問答集 ID58621 | |
|
How do I save and load a reference waveform to a DPO/MSO3000 series oscilloscope?
This Video will explain how to setup, save and load a reference waveform. It can be done through a USB flash drive or by internal memory.
This method for using reference waveforms can be applied to all MSO/DPO2000, MSO/DPO3000, MSO/DPO/MDO4000 …
|
常見問答集 ID64641 | |
|
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
|
常見問答集 ID64771 | |
|
How do I set up an Ethernet bus decode?
Make sure your setup is prepared to decode, that you have the needed probes, scope options, test boards, etc. Once you have the options it's important to know how to use the options and probe your signal. To setup Ethernet bus decoding, turn on your …
|
常見問答集 ID64731 | |
|
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
|
常見問答集 ID63266 | |
|
MDO4000C, MDO4000B, MDO4000, MSO4000B, DPO4000B, and MDO3000 Series
Digital Oscilloscopes
This manual explains the use of commands for remotely controlling youroscilloscope. With this information, you can write computer programs toperform functions, such as setting the front-panel controls, taking measurements, performing statistical calculations, and exporting data for use in other programs. 零件編號： 077051009 |
程式設計師 | |
|
Tektronix Demo 3 Board Instruction Manual
Demo 3 Board Instruction Manual
This document describes the operation of the Tektronix Demo 3 Board. The Demo 3 board provides signals to demonstrate key Tektronix instrument features. 零件編號： 071286202 |
訓練/教學 | |
|
MSO4000B and DPO4000B Series
Digital Phosphor OscilloscopesSpecifications and Performance Verification
Revision B. This manual contains the specifications and the performance verification procedures for the MSO4000B and DPO4000B Series oscilloscopes. 零件編號： 077050903 |
效能驗證 | |
|
MSO4000B and DPO4000B Series
Digital Phosphor Oscilloscopes
This MSO4000B and DPO4000B series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications. 零件編號： 071281004 |
主要使用者 | |
|
MDO4000C, MDO4000B, MDO4000, MSO4000B, DPO4000B, and MDO3000 Series
Digital Oscilloscopes
This manual explains the use of commands for remotely controlling youroscilloscope. With this information, you can write computer programs toperform functions, such as setting the front-panel controls, taking measurements, performing statistical calculations, and exporting data for use in other programs. 零件編號： 077051007 |
程式設計師 | |
|
KickStart Instrument Control Software Version 2.2.0 (Windows 10, 8, 7 compatible)
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments.
Key Features
• Save time by automating data collection of millions of readings.
• Set up a multi-instrument test with the …
零件編號： KICKSTART-2.2.0 |
應用 | |
|
KickStart Instrument Control Software Version 2.1.1 (Windows 10, 8, 7 compatible)
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments.
Key Features
• Save time by automating data collection of millions of readings.
• Set up a multi-instrument test with the …
零件編號： KICKSTART-2.1.1 |
應用 | |
|
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …
零件編號： 066093812 |
驅動程式 | |
|
DPO2000, MSO2000, DPO3000 and DPO4000, MSO3000 and MSO4000, MDO3000 and MDO4000 and MDO3 IVI Driver - V1.5
The Tektronix MSO/DPO2000, MDO/MSO/DPO3000, MDO/MSO/DPO4000 and MDO3 IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an …
零件編號： 066133104 |
驅動程式 | |
|
KickStart Instrument Control Software Version 2.1.0 (Windows 10, 8, 7 compatible)
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments.
Key Features
• Save time by automating data collection of millions of readings.
• Set up a multi-instrument test with the …
零件編號： KICKSTART-2.1.0 |
應用 | |
|
MSO4000B, DPO4000B Firmware - V3.22
This firmware is an upgrade for all MSO/DPO4000B Series oscilloscopes.
零件編號： 063447007 |
韌體 | |
|
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …
零件編號： 066093811 |
驅動程式 | |
|
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …
零件編號： 066093914 |
公用程式 | |
|
MSO4000B, DPO4000B Firmware, V3.20
This firmware is an upgrade for all MSO/DPO4000B Series oscilloscopes.
零件編號： 063447006 |
韌體 | |
|
Testing a New Switch Mode Power Supply Design Poster
Get a quick overview of the key measurements for verifying a new switch mode power supply (SMPS) design. This poster shows key measurements, from verifying your prototype during initial startup, to optimizing switching loss and magnetic losses, to …
文件編號： 46W-60156-0 |
海報 | |
|
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …
文件編號： 51W-60171-2 |
應用摘要 | |
|
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …
文件編號： 46W-31080-7 |
選購指南 | |
|
Test methodologies for high-speed serial designs
|
產品文章 | |
|
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform
complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …
零件編號： 066177100 |
應用 | |
|
MSO4000B, DPO4000B Firmware, V3.18
This firmware is an upgrade for all MSO/DPO4000B Series oscilloscopes.
零件編號： 063447005 |
韌體 | |
|
Tektronix Toolbars for Microsoft Office, V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for Microsoft Excel and Microsoft Word.This version of Toolbars requires OpenChoice TekVISA v4.0.0 or higher be preinstalled on the PC or Windows based Oscilloscope.The Toolbar …
零件編號： 066133202 |
公用程式 | |
|
MSO4000B, DPO4000B Firmware, V3.16
This firmware is an upgrade for all MSO/DPO4000B Series oscilloscopes.
零件編號： 063447004 |
韌體 | |
|
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.
When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …
零件編號： 066093809 |
驅動程式 | |
|
MSO4000B, DPO4000B FIRMWARE, V2.96
This firmware is an upgrade for all MSO/DPO4000B Series oscilloscopes.
零件編號： 063447002 |
韌體 | |
|
MSO4000B, DPO4000B FIRMWARE, V2.90
This firmware is an upgrade for all MSO/DPO4000B Series oscilloscopes.
零件編號： 063447001 |
韌體 | |
|
DPO2000, DPO3000, DPO4000 IVI Driver
The Tektronix DPO2000, DPO3000, DPO4000 IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API …
零件編號： 066133101 |
驅動程式 | |
|
DPO4000B AND MSO4000B FIRMWARE V2.52
This firmware is an upgrade for all DPO4000B and MSO4000B Series oscilloscopes.
零件編號： 063432911 |
韌體 | |
|
DPO4000 AND MSO4000 FIRMWARE V2.62
This firmware is an upgrade for all DPO4000 and MSO4000 Series oscilloscopes.
零件編號： 063397016 |
韌體 | |
|
USING MATLAB WITH MSO_DPO4000 AND MSO_DPO3000 SERIES OSCILLOSCOPES v1.0
MATLAB is a software environment and programming language that enables Tektronix oscilloscope users to acquire and analyze data, graphically visualize data, make custom measurements, generate reports, and develop automated applications. Perform …
零件編號： 066110000 |
驅動程式 | |
|
使用示波器和函數產生器執行電容和電感量測
如果實驗室內沒有 LCR 計量器，或您想展示在正弦刺激下的電容器和電感器的行為，則示波器和函數產生器可協助您進行簡單、透明的阻抗量測。您可在預估電容和電感值時加入 3%-5% 的不確定性。
文件編號： 75W-28152-0 |
應用摘要 | |
|
深入瞭解示波器
閱讀本入門手冊之後，您將能夠：描述示波器的工作方式描述各種示波器之間的差異描述電氣波形類型,瞭解基本示波器控制功能進行簡單的量測
文件編號： 03Z-8605-7 |
初階 | |
|
MDO/MSO/DPO4000B Series vs. Agilent MSO/DSO-X 4000A Series
Side-by-side comparison on important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with MSO, and more.
文件編號： 3GW-29111-2 |
競爭優勢 | |
|
MDO4000B 系列與 Agilent/Keysight MSOX4000A 系列(英)
"瞭解示波器的真正價值 比較示波器時，請檢查操作的細節，並找出您需取得的效能通用性，才能在現在和未來完成各種基本量測挑戰的「隱性」成本。"
文件編號： 48W-30246-0 |
競爭優勢 | |
|
Smiths Detection Relies on Tektronix to Take the Trouble out of Troubleshooting
A team of engineers at Smith Detection needed to quickly, efficiently and accurately identify and resolve problems during the development of complex handheld devices. Learn how Smith Detection engineers used Tektronix bench instruments to identify a …
文件編號： 48W-24397-0 |
技術簡介 | |
|
使用串列應用:共同串列標準快速參考指南
區域網路的日增使用，增加了新的設計挑戰，例如CAN、LIN 與FlexRay 等串列應用整合於汽車設計中。串列匯流排正快速取代嵌入式系統設計中的寬並列匯流排，帶來：改良的電路板設計簡化的複雜系統設計
文件編號： 3GT-20201-4 |
規格摘要表 | |
|
示波器選購表格
讓選購示波器變得容易。利用此快速參考表格即可了解並比較 Tektronix 示波器 (頻寬從 100 MHz 至 1 GHz) 的主要規格。
文件編號： 3GT-17782-10 |
使用方式指南 | |
|
Tektronix MSO4000 系列與Agilent MSO8000A 系列比較
Tektronix MSO4000 系列與Agilent MSO8000A 系列比較. 產品尺寸比較/波形顯示區比較/解碼資料的事件表顯示...
文件編號： 3GT-20442-0 |
競爭優勢 | |
|
MSO 或 LA, 哪一種才是最適合您的工具?
我們將為您準備由 Tektronix 製作的 2 張幻燈片快速指南簡報，以協助您快速瞭解這兩種儀器之間的差異，並決定那種工具更適合您。
文件編號： 3GT-19999-0 |
使用方式指南 | |
|
數位螢光示波器產品系列規格摘要表
2頁的介紹， 數位螢光示波器產品系列規格摘要表
文件編號： 3GT-21368-2 |
規格摘要表 | |
|
示波器選購表格
讓選購示波器變得容易。利用此快速參考表格即可了解並比較 Tektronix 示波器 (頻寬從 100 MHz 至 1 GHz) 的主要規格。
文件編號： 3GT-17782-12 |
使用方式指南 | |
|
一般電源供應器量測 (MSO 與DPO 系列示波器)
快速指南：一般電源供應器量測 (MSO 與DPO 系列示波器)
文件編號： 3GW-23687-1 |
規格摘要表 | |
|
Tektronix MSO4000 系列與Agilent MSO6000A 系列比較
Tektronix MSO4000 系列與Agilent MSO6000A 系列比較
文件編號： 3GT-20441-0 |
競爭優勢 | |
|
電源供應器量測簡介
電源供應器量測簡介：使用4000 系列數位螢光示波器.今日，大部分的工程師偏好使用示波器來作為電源量測平台。本應用摘要將著重於使用示波器進行基本的電源供應器量測。
文件編號： 3GT-21141-0 |
應用摘要 | |
|
視訊量測簡介
視訊量測簡介 > 使用4000 系列數位螢光示波器在本應用摘要中，我們將檢視關鍵的視訊量測問題，並說明這些問題與不同類型示波器功能之間的關聯性。同時我們也將示範如何使用4000 系列數位螢光示波器，來執行視訊量測作業。
文件編號： 3GT-20975-0 |
應用摘要 | |
|
使用MSO/DPO 系列示波器進行電源供應器量測與分析
電源供應器存在於許多不同的電子裝置中，包括兒童玩具、電腦和辦公室設備到工業設備。這些電源供應器是用來轉換電力的形式，以讓裝置正常運作。常見的電源供應器為AC 轉DC 轉換器或DC 轉DC 轉換器，前者將交流電壓改變為穩壓直流電壓，後者將電池電力轉換為所需的電壓位準。
文件編號： 3GT-23612-4 |
應用摘要 | |
|
十個您非買這台混合訊號示波器不可的理由
了解專為讓您可更輕鬆地工作的 MSO4000 系列創新但容易上手之所有功能的相關資訊。
文件編號： 3GT-20214-0 |
小冊子 | |
|
Tektronix：數位除錯程序快了 53%(英)
Hansa GCR 所進行的數位除錯研究調查著眼於找出進行數位訊號除錯的最佳示波器。在尋找的過程中，Hansa GCR 請工程師使用 3 款示波器進行下列日常工程工作，以進行比較。觀看這段 5 分鐘的影片，看看 Tektronix、Agilent 和 LeCroy 示波器如何執行。時間：5 分鐘 觀看影片
|
競爭優勢 | |
|
Tektronix MSO/DPO4000 系列與 Agilent 5000A+ 6000A+ 和 7000A 規格摘要表(英)
如串列觸發和解碼、波形瀏覽和搜尋，以及記錄長度等重要功能的逐項比較。
文件編號： 3GW-21844-6 |
競爭優勢 | |
|
Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing …
文件編號： 51W-60161-3 |
應用摘要 | |
|
2013年桌上型測試儀器產品型錄
提供了Tektronix桌上型儀器的最新產品細節和規格，包括：基礎和桌上型示波器、數位萬用電錶、電源供應器、計頻器/計時器和訊號產生器。
文件編號： 48T-25025-8 |
選購指南 | |
|
Portable Scopes Designed for Embedded Design and Debug
|
產品文章 | |
|
使用桌上型示波器執行電源量測和分析
今日的電源供應器正達到前所未見的效率，使得設計工程師需要進行眾多特殊的功率量測，不但耗時而且複雜。瞭解如何使用 Tektronix 桌上型示波器執行自動電源量測功能並提供快速、簡單的分析。
文件編號： 3GZ-23612-6 |
應用摘要 | |
|
電源供應器量測與分析入門手冊
本入門手冊著重於以示波器和特定應用軟體，進行切換模式電源供應器設計的量測。
文件編號： 55T-18412-6 |
初階 | |
|
Wave Inspector® 簡化波形分析作業
現代的數位示波器可擷取大量資料，且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能，如何提供工具，讓您快速有效率地找出所要的答案。
文件編號： 48T-19039-9 |
應用摘要 | |
|
選擇正確的桌上型示波器指南
《桌上型示波器選型指南》強調 MSO / DPO 系列的創新性以及強大的功能和好處。多達 20 個類比通道和數位通道，以及自動的串列和並列匯流排分析功能，MSO / DPO 系列提供了簡化和加速複雜設計的除錯程序所需的功能豐富工具。
文件編號： 3GW-24014-1 |
選購指南 | |
|
使用 Tektronix 示波器和選配軟體提供串列支援
Tektronix 示波器提供了選配分析功能的組合，可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。
文件編號： 55W-29028-13 |
選購指南 | |
|
Making MicroVolt Biomedical Measurements
Learn how paying attention to grounding, isolation, and probe shielding can produce very refined biomedical measurement, inexpensively.
文件編號： 48W-28061-0 |
技術簡介 | |
|
Embedded-design MSOs pack all test tools in one box
|
產品文章 | |
|
3000 X 系列與 MSO/DPO4000B 系列示波器的真實成本(英)
Tektronix 桌上型示波器內建了各種創新的功能，可協助您更快完成工作。而且，標配隨附了一套完整的探棒和配件，讓您可以立即開始測試。比較示波器時，別忘了看看要獲得您所需配置而需要的「隱性」成本。
文件編號： 3GW-27919-0 |
競爭優勢 | |
|
嵌入式系統設計中的低速串列匯流排除錯
當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分，是一種專用的電腦系統，其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式，直到關閉後才會停止。當前設 計和製造的所有電子裝置，均屬於嵌入式系統。
文件編號： 48W-19040-21 |
應用摘要 | |
|
尋找無線嵌入式系統的雜訊源
在嵌入式系統中加入無線功能時，有多種整合時通常會遇到的問題。在本應用摘要中，您將可發現利用 MDO4000 系列混合域示波器系列尋找雜訊來源的技巧和技術。
文件編號： 48W-26920-0 |
規格摘要表 | |
|
Oscilloscope Combines Logic Analyzer With Ease Of Use For Better Debugging
|
產品文章 | |
|
Introduction to Video Measurements
In this application note, we demonstrate using a MSO/DPO5000, MDO/MSO/DPO4000 and MDO/MSO/DPO3000 Series Oscilloscope to make a variety of video measurements that are common in standard and high definition systems.
文件編號： 3GW-20975-2 |
應用摘要 | |
|
iCub Robot Gets Battery Power with Help of Tektronix Oscilloscope, Voltage and Current Probes
Developers at the Istituto Italiano Di Tecnologia (IIT) needed to validate and troubleshoot a new battery backpack power supply system for the iCub robot, an open-source cognitive humanoid robot platform. This case study shows how IIT used the …
文件編號： 48W-31073-0 |
個案研究 | |
|
使用太克被動式探棒提高量測準確度和降低成本
本應用摘要介紹太克高頻寬、低電容被動式電壓探棒如何降低示波器使用者的總擁有成本、改善效能和量測準確度及節省使用者設定時間。大多數示波器標準配備的被動式電壓探棒都提供低成本通用型探測解決方案。一般來說，這些探棒缺乏主動式電壓探棒的效能，但堅固耐用且動態範圍寬，適合查看訊號。
文件編號： 51W-26294-6 |
應用摘要 | |
|
使用混合訊號示波器進行數位除錯的訣竅
隨著電子產品變得更為快速複雜，其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計，以確保可靠的產品運作。問題發生時，設計人員需要迅速地深入瞭解問題的根源，以解決問題。藉由同時分析類比與數位呈現的訊號，更快速找出眾多數位問題的根源，這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。
文件編號： 3GT-24008-4 |
應用摘要 | |
|
Tektronix MSO/DPO4000 系列與 LeCroy WaveRunner Xi 規格摘要表(英)
如串列觸發和解碼、波形瀏覽和搜尋，以及波形擷取率等重要功能的逐項比較。
文件編號： 48W-22679-3 |
競爭優勢 | |
|
Tektronix Adds Support for Automated APCO P25 Transmitter Compliance Testing
Also Releases a Series of Enhancements, Upgrades for Real-time Spectrum Analyzers Including Noise Figure and Gain Measurement CapabilityBEAVERTON, Ore., July 29, 2014 - Tektronix, Inc., a leading worldwide provider of test, measurement and monitoring …
|
新聞稿 | |
|
Tektronix MSO4000 系列與 LeCroy MS-500 探棒規格摘要表 (英)
在此深入的產品比較簡介中，配備 P6516 數位探棒的 Tektronix MSO4000 系列混合訊號示波器及 LeCroy MS-500 探棒將逐項進行比較。查看關於規模、靈活探測，以及其他主要規格的逐項比較。
文件編號： 3GW-20891-0 |
競爭優勢 | |
|
Tektronix MSO4000 Mixed Signal Oscilloscopes Win 2008 EDN China Innovation Award
|
獎項 | |
|
Tektronix MSO4000 系列與 LeCroy MS-500 混合訊號解決方案規格摘要表(英)
如顯示幕大小、類比與數位資料搜尋，以及設定與保持觸發等重要功能的逐項比較。
文件編號： 3GK-20891-0 |
競爭優勢 | |
|
Tek oscilloscopes catch analog and digital signals
|
產品文章 | |
|
Tektronix MSOs Set Performance Benchmarks
|
產品文章 | |
|
Tektronix MSO/DPO4000 系列與 LeCroy WaveSurfer XS 規格摘要表(英)
如串列觸發和解碼、波形瀏覽和搜尋，以及波形擷取率等重要功能的逐項比較。
文件編號： 48W-22680-3 |
競爭優勢 | |
|
REVIEW: Cost-effective scopes time-correlate analog+ digital signals
|
產品文章 | |
|
MSO4000 與MSO3000 系列對LeCroy MS-xxx 系列混合訊號解決方案
解決方案比較，波形顯示比較，主要MSO 規格比較， 搜尋類比和數位資料
文件編號： 3GT-24011-0 |
競爭優勢 | |
|
MSO/DPO4000 系列與 Yokogawa DLM2000 系列(英)
如串列觸發和解碼、波形瀏覽和搜尋、使用者體驗、利用 MSO 的數位除錯等重要功能的逐項比較。
文件編號： 3GW-24237-1 |
競爭優勢 | |
|
MSO/DPO4000 系列與 Agilent MSO/DSO7000B 系列比較
如串行觸發和解碼，導航和搜索波形，波形捕獲率，MSO的數字調試，等等。
文件編號： 48T-25674-0 |
競爭優勢 | |
|
MSO/DPO4000B 系列與 Agilent MSO/DSO3000 X-系列(英)
如串列觸發和解碼、量測和波形數學運算，以及利用 MSO 的數位除錯等重要功能的逐項比較。
文件編號： 48W-27796-1 |
競爭優勢 | |
|
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies. This application note explains how to measure switching loss and conduction loss in power supply …
文件編號： 46W-60010-3 |
應用摘要 | |
|
MDO4000B, MDO4000, MSO4000B, DPO4000B, and MDO3000 Series
Digital Oscilloscopes
Programmer Manual
This manual explains the use of commands for remotely controlling your oscilloscope. With this information, you can write computer programs to perform functions, such as setting the front-panel controls, taking measurements, performing statistical calculations, and exporting data for use in other programs. 零件編號： 077051006 |
程式設計師 | |
|
MDO4000B, MDO4000, MSO4000B and DPO4000B Series
Digital Oscilloscopes
Programmer Manual
This manual explains the use of commands for remotely controlling your oscilloscope. With this information, you can write computer programs to perform functions, such as setting the front-panel controls, taking measurements, performing statistical calculations, and exporting data for use in other programs. 零件編號： 077051005 |
程式設計師 | |
|
RMD5000
Tektronix DPO & MSO 4000B Series and DPO & MSO5000/B
Series Rackmount Kit
Instructions
These instructions describe the installation of the rackmount kit to your standard bench-top instrument. 零件編號： 075102002 |
現場安裝指示 | |
|
MDO4000, MSO4000B and DPO4000B Series
Digital Oscilloscopes
Programmer Manual
This manual explains the use of commands for remotely controlling your oscilloscope. With this information, you can write computer programs to perform functions, such as setting the front-panel controls, taking measurements, performing statistical calculations, and exporting data for use in other programs. 零件編號： 077051003 |
程式設計師 | |
|
MSO4000B and DPO4000B Series
Digital Phosphor Oscilloscopes
Service Manual
This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts. 零件編號： 077051202 |
服務 | |
|
MSO4000B and DPO4000B Series and Application Modules
Declassification and
Security
Instructions
If you have data security concerns, this document helps you to sanitize or remove memory devices from the Tektronix MSO4000B Series and DPO4000B Series Digital Phosphor Oscilloscopes. 零件編號： 077051101 |
解除機密 | |
|
MSO4000B 和 DPO4000B 系列 使用者手冊
數位螢光示波器
User Manual
本 MSO4000B 和 DPO4000B 系列使用者手冊說明如何操作示波器並包含安裝程序。其中還提供與特性、功能和應用有關的資訊。 零件編號： 071281803 |
主要使用者 | |
|
MDO4000, MSO4000B and DPO4000B Series
Digital Oscilloscopes
Programmer Manual
This manual explains the use of commands for remotely controlling your oscilloscope. With this information, you can write computer programs to perform functions, such as setting the front-panel controls, taking measurements, performing statistical calculations, and exporting data for use in other programs. 零件編號： 077051002 |
程式設計師 | |
|
MSO4000B 和 DPO4000B 系列 使用者手冊
數位螢光示波器
User Manual
本 MSO4000B 和 DPO4000B 系列使用者手冊說明如何操作示波器並包含安裝程序。其中還提供與特性、功能和應用有關的資訊。 零件編號： 071281802 |
主要使用者 | |
|
MSO4000B and DPO4000B Series
Digital Phosphor Oscilloscopes
Specifications and Performance Verification
Technical Reference
This manual contains the specifications and the performance verification procedures for the MSO4000B and DPO4000B Series oscilloscopes. 零件編號： 077050901 |
效能驗證 | |
|
MSO4000B and DPO4000B Series
Digital Phosphor Oscilloscopes
Service Manual
This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts. 零件編號： 077051201 |
服務 | |
|
Read This First
Download the Latest IVI Drivers
Read This First
This document is targeted to product users and explains installation procedures. 零件編號： 061438100 |
版本資訊 | |
|
HCTEK54
Transit Case
Instructions
This document provides information about the features and using the HCTEK54 transit case. 零件編號： 071282800 |
使用者 | |
|
MDO4000, MSO4000, MSO4000B, DPO4000, DPO4000B Series
Application Module
Installation Manual
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 零件編號： 071213601 |
使用者 | |
|
Probe and Accessories
Pouch Installation
Instructions
This document provides installation instructions for the MSO/DPO4000B probe and accessires pouch. 零件編號： 071283000 |
現場安裝指示 |
