下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

MSO2000B/DPO2000B

MSO/DPO2000B 混合訊號示波器系列是同級中功能最強的示波器,能以入門級的價格提供先進的除錯功能。 由於多達 20 個通道,您可以使用一台儀器,同時分析類比訊號和數位訊號。 結合該功能與自動化的串列及並列匯流排分析以及創新的 Wave Inspector® 控制,您可以得到加快除錯速度所需的功能。

每一位工程師都有一篇示波器故事
分享您的 #TekScopeStory 並
加入 #TekOneMillion。

基本價格
US $1,490 - US $4,050
購買/報價 有任何問題嗎?立即開始聊天
頻寬

最高 200 MHz

記錄長度

1 M 點

類比通道

2 4

取樣率

所有通道上皆為 1 GS/s

 

MSO/DPO2000B Mixed Signal Oscilloscope

加快尋找、除錯和分析的速度

Thumbnail

在您的設計中利用 4 個類比通道和 16 個數位通道,加上 2 匯流排波形來查看多點。 使用數位螢光顯示器和 125 個觸發組合快速找出異常,並使用 Wave Inspector 平移 1M 波形點、放大、標示興趣點,以及在標記間瀏覽。 再加上:FilterVu 可減少雜訊,不是突波。

無須再手動解碼串列匯流排

Thumbnail

利用自動串列匯流排解碼減少錯誤並節省時間。 此外,可選的串列觸發和解碼模組可以自動觸發特定的封包內容,然後以類比波形和匯流排視圖顯示資料,以便快速瞭解。 還提供:在汽車、嵌入式設計和電腦應用程式中提供先進串列匯流排的選項。

擴展無限可能的探棒介面

Thumbnail

Tek VPI 探棒介面提供廣泛的應用涵蓋面,您不必擔心刻度因數。 使用廣泛的主動式和電流探棒,這些探棒可自動傳達刻度因數、啟用簡單的偏移校正,並在示波器顯示器上提供探棒資訊。

簡化混合訊號除錯

Thumbnail

最多 4 個類比通道和 16 個數位通道的混合訊號除錯,全都與時序相關。 結合數位通道來顯示並列匯流排或解碼串列匯流排。 加入創新的 P6316 邏輯探棒,可輕鬆連接至您的設計並追蹤訊號。

特性

  • 16 個完全整合的通道,全都具有 1GS/s 取樣率。
  • 易於使用的邏輯分析儀功能。
  • 定義用於觸發和解碼的並列或串列匯流排。
  • 具有波形分組和顏色編碼,簡單易懂的視覺化呈現。

 

機型 類比頻寬 取樣率 記錄長度 類比通道 數位通道 參考價格
DPO2002B 70 MHz 1 GS/s 1 M 點 2 - US $1,490
配置和報價
DPO2012B 100 MHz 1 GS/s 1 M 點 2 - US $1,860
配置和報價
DPO2004B 70 MHz 1 GS/s 1 M 點 4 - US $2,270
配置和報價
MSO2002B 70 MHz 1 GS/s 1 M 點 2 16 US $2,320
配置和報價
DPO2022B 200 MHz 1 GS/s 1 M 點 2 - US $2,620
配置和報價
DPO2014B 100 MHz 1 GS/s 1 M 點 4 - US $2,690
配置和報價
MSO2012B 100 MHz 1 GS/s 1 M 點 2 16 US $2,690
配置和報價
MSO2004B 70 MHz 1 GS/s 1 M 點 4 16 US $3,090
配置和報價
DPO2024B 200 MHz 1 GS/s 1 M 點 4 - US $3,230
配置和報價
MSO2022B 200 MHz 1 GS/s 1 M 點 2 16 US $3,450
配置和報價
MSO2014B 100 MHz 1 GS/s 1 M 點 4 16 US $3,500
配置和報價
MSO2024B 200 MHz 1 GS/s 1 M 點 4 16 US $4,050
配置和報價
機型 類比頻寬 取樣率 記錄長度 類比通道 數位通道 參考價格
DPO2002B 70 MHz 1 GS/s 1 M 點 2 - US $1,490
配置和報價
DPO2012B 100 MHz 1 GS/s 1 M 點 2 - US $1,860
配置和報價
DPO2004B 70 MHz 1 GS/s 1 M 點 4 - US $2,270
配置和報價
MSO2002B 70 MHz 1 GS/s 1 M 點 2 16 US $2,320
配置和報價
DPO2022B 200 MHz 1 GS/s 1 M 點 2 - US $2,620
配置和報價
DPO2014B 100 MHz 1 GS/s 1 M 點 4 - US $2,690
配置和報價
MSO2012B 100 MHz 1 GS/s 1 M 點 2 16 US $2,690
配置和報價
MSO2004B 70 MHz 1 GS/s 1 M 點 4 16 US $3,090
配置和報價
DPO2024B 200 MHz 1 GS/s 1 M 點 4 - US $3,230
配置和報價
MSO2022B 200 MHz 1 GS/s 1 M 點 2 16 US $3,450
配置和報價
MSO2014B 100 MHz 1 GS/s 1 M 點 4 16 US $3,500
配置和報價
MSO2024B 200 MHz 1 GS/s 1 M 點 4 16 US $4,050
配置和報價
產品規格表 軟體套件 / 軟體選項 說明 配置與報價
產品規格表 模組 說明 配置與報價
檢視產品規格表 DPO2CONN 通訊 I/O 模組:乙太網路和外部監視器輸出 配置與報價
The MSO2000B Series offers the best debugging capability on the highest usable number of channels in its class.
2m 14s
Measurement Data Logging with TekBench Oscilloscope Control Software
This application note describes how to use TekBench™ Software and a Tektronix oscilloscope to perform measurement data logging for evaluating a design’s reliability in a room temperature environment, such as a project laboratory.

文件編號: 61W-61442-0
應用摘要
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
常見問答集 ID66181
Is the .ISF waveform file format file used on the DPO2000/MSO2000+ DPO3000/MSO3000+ DPO4000/MSO4000 series compatible with the Arb Express software?
The DPO2000/MSO2000, DPO3000/MSO3000, DPO/MSO4000 series format files cannot be imported into Arb Express.
常見問答集 ID63786
How do I clear my memory using TekSecure on a MSO/DPO/MDO4000 Series oscilloscope?
This procedure for clearing the memory on oscilloscope can be applied to the DPO/MSO/MDO4000, DPO/MSO3000 and DPO/MSO2000 Series oscilloscope families. By clearing the memory you will lose all saved reference waveforms, saved setups and all other …
常見問答集 ID64686
How do I use the Save and Recall functionality of the MDO4000 series oscilloscope?
To save a screen image, go to the Save/Recall menu at the bottom of the scope. From there select the Save Screen Image softkey. This will pop up a new window with saving options. Saving a screen image requires an external memory device, such as a USB …
常見問答集 ID69156
What does USBTMC mean?
USBTMC stands for USBTest and Measurement Class and allows GPIB-style communication over USB using USBTMC-compliant VISA layers.
常見問答集 ID56056
Why does the DPO2000 or MSO2000 series oscilloscope sometimes present the record length selections as 100k and 1.00M but other times it presents 125k and 1.25M+ or 125k and 1.00M?
Here are the rules to understand when a record length is available:For the "short" record lengths: 100k record lengths: Time/Div <= 40us (40 us/div and faster) 125k record lengths: Time/Div >= 100us (100 us/div and slower)For the "long" record …
常見問答集 ID60256
How do I erase and declassify an MSO/DPO2000, MSO/DPO/MDO3000, and MSO/DPO/MDO4000 Series oscilloscope?
This example will show you how to declassify the MDO4000/B/C Series oscilloscope. This procedure also applies to the MSO/DPO4000/B, MSO/DPO/MDO3000, and the MSO/DPO2000/B series of oscilloscope.The first step in the declassification process is …
常見問答集 ID66231
We have a classroom where we need to project the screen of an oscilloscope. Being a school+ what is the lowest cost solution for connecting a projector to a scope?
The lowest cost solution is to use the DPO2012 with the DPO2CONN module. It provides a VGA output of the screen, as well as the Ethernet port for PC connectivity.
常見問答集 ID63991
My Tektronix oscilloscope uses the Linux operating system.  Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the …
常見問答集 ID64866
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
常見問答集 ID64666
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
常見問答集 ID58571
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
常見問答集 ID54941
What are the maximum power draw ratings for the DPO2000/B and MSO2000/B series oscilloscopes+ TEKVPI probes+ and TPA-BNC adapter?
Please see the table link below
常見問答集 ID59896
Do I need a TekVPI power adapter part number 119-8726-00 (previous p/n was 119-7465-xx) for each probe I connect to my DPO2000/B and MSO2000/B series oscilloscope? How does the power adapter connect the oscilloscope?
No. Only 1 power adapter is needed per oscilloscope.  The power adapter provides 50 W of power which is sufficient to support any combination of compatible probes used on channels 1, 2, 3, 4 and aux in. To connect the TekVPI power adapter, simply …
常見問答集 ID59221
How do I order the DPO Demo 2 board and the USB cable (020-2924-XX) used in the DPO2000/MSO2000+ DPO3000/MSO3000 and DPO2000/MSO4000 Series Lab Exercise Book?
Email the request with part number (020-2924-xx) to [email protected] or call 1-800-833-9200 prompt 1 for sales.
常見問答集 ID59461
Is the .ISF waveform file format file used on the DPO2000+ MSO2000+ DPO3000+ MSO3000+ DPO4000 and MSO4000 series compatible with the TDS3000/TDS3000B/TDS3000C format files?
No.   The formats are very similar, but they are not compatible.
常見問答集 ID63781
I have captured waveform data as .isf files. I want to know which software can convert .isf to .png or .jpg.
If the .isf file was captured on the DPO2000/MSO2000, DPO3000/MSO3000, DPO4000/MSO4000 series scope, you could open it with OpenChoice Desktop software. Or you could recall the waveform into the scope as a reference waveform, and then save on the …
常見問答集 ID61871
What communication modules can I use with my oscilloscope?
Please go to the "Supported Data Interfaces" section of www.tek.com/products/oscilloscopes/supported_printers.pdf.
常見問答集 ID64051
Where is the "Invert" button on my DPO2000 or the MSO2000?
If you have older firmware version v1.06 or below, you will need to use the Math function on the oscilloscope to subtract the channel of interest from another channel that is set to ground coupling in order to get the invert function.The invert …
常見問答集 ID60221
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
常見問答集 ID64756
Where Do I Download USB Device Driver For Tektronix USB Instruments?
Tektronix USB instruments use and require a generic USB Device Driver, referred to as a USB Test & Measurement Class driver or USBTMC driver. USBTMC is a subclass of the USB specification.  This driver is typically included with the Virtual …
常見問答集 ID60216
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
常見問答集 ID64781
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
常見問答集 ID64776
Does the MSO4000+ MSO3000+ or MSO2000 series support the TLAHRA high impedance probe adapter?
This accessory is compatible with the P6516 and P6316 logic probes.
常見問答集 ID61681
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.   For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
常見問答集 ID59166
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64791
What are the differences for the MSO/DPO2000 and MSO/DPO2000B series?
The differences are that the MSO/DPO2000B offer the 70MHz models and a standard 5 years warranty instead of the 3 years warranty.
常見問答集 ID64811
Where can I find an IVI driver for TDS200+ TDS1000/TDS2000+ TDS1000B/TDS2000B+ TDS2000C+ TPS2000+ TDS3000/TDS3000B/TDS3000C+ DPO2000/MSO2000+ DPO3000/MSO3000+ DPO4000/MSO4000 series?
IVI drivers to support LabView, LabWindows/CVI, and LabView SignalExpress can be found on the National Instruments Developer Zone, http://zone.ni.com/.For MSO3000 series please use the drivers posted for the DPO3000 series.For MSO4000 series please …
常見問答集 ID60176
What are the key differences between the TBS2000, MSO/DPO2000B, TBS1000B, and TDS2000C oscilloscopes?
Below is a condensed table of key specifications of this range of oscilloscopes. More information can be found on the data sheets or in the manuals of each of the oscilloscope product lines. Note that there are feature options available to each …
常見問答集 ID72201
I have connected my MSO2000 (or DPO2000) series oscilloscope to a PictBridge printer using a USB-B to USB-B cable. But nothing is printing on the printer when I press the print button. What is wrong?
You should be using a USB-B to USB-A cable.  Connect the USB-B end of the cable to the instrument rear panel USB device port (marked with PictBridge symbol), and connect the USB-A end of the cable to the USB host port (marked with PictBridge symbol) …
常見問答集 ID59556
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64796
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
常見問答集 ID474266
I am experiencing front panel operational issues with my MSO/DPO2000 and MSO/DPO3000.  At times the front panel controls are inoperative or my cursors do not move normally or scaling does not work. 
This could be related to the instrument software currently installed on your instrument.  Check to see what software version is currently installed on your instrument. For a MSO/DPO3000, should have software V2.16 or greater For a MSO/DPO2000, should …
常見問答集 ID64581
Why does the Tkdpo2k3k4k_ReadWaveform() function in the Tkdpo2k3k4k IVI-C driver time out every time I call it when I am connected to the instrument via Ethernet? The function call works fine over USB, but over Ethernet it always times out.
The Tkdpo2k3k4k_ReadWaveform() function makes use of the Service Request Event in VISA so the scope can notify the driver when it has completed its acquisition and the waveform data is ready to be fetched as opposed to the driver polling the scope …
常見問答集 ID72221
Are LabView drivers available for the DPO2000+ MSO2000+ DPO3000+ MSO3000+DPO4000+ and MSO4000 series oscilloscopes?
A. IVI drivers to support LabView, LabWindows/CVI, and LabView SignalExpress can be found on the National Instrument website. Go to www.ni.com, search on "instrument drivers", and then search by specific model number.The MSO4000, DPO4000, MSO3000 …
常見問答集 ID60341
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
常見問答集 ID64751
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
常見問答集 ID69186
Where can I find the manual for the application module for my MSO2000+ DPO2000+ MSO3000+ DPO3000+ MSO4000+ or DPO4000 series oscilloscope?
The application modules are all addressed in the user manual for your oscilloscope. Only the power analysis module (DPO3PWR and DPO4PWR) has its own user manual.You could also refer to the Lab Exercise Book for different series oscilloscope in the …
常見問答集 ID60191
Does NI LabVIEW SignalExpress Tektronix Edition version 2.51 work with the MSO2000+ DPO2000+ MSO3000+ DPO3000+ MSO4000+ and DPO4000 Series oscilloscopes?
NI LabVIEW SignalExpress TE does work with the MSO/DPO series, with two main caveats:NI SignalExpress TE only acquires the analog channel data, not the digital channels or bus waveforms.The step used for the MSO3000 is the same step used for the …
常見問答集 ID63376
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
常見問答集 ID60306
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
常見問答集 ID56016
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
常見問答集 ID56226
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
常見問答集 ID247211
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
常見問答集 ID59621
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
常見問答集 ID56456
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
常見問答集 ID53511
How can I disable "Autoset" on the DPO2000+ MSO2000+ DPO3000+ MSO3000+ DPO4000 or MSO4000 series oscilloscope?
1. Press and hold Autoset.2. Press and hold Menu Off.3. Release Menu Off, and then release Autoset.This will open the Autoset menu options.  You may now select either Enable or Disable. 
常見問答集 ID59391
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
常見問答集 ID60041
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
常見問答集 ID64656
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
常見問答集 ID64706
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
常見問答集 ID69176
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
常見問答集 ID69181
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
常見問答集 ID64251
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
常見問答集 ID60416
How to decode the RS422 or RS485 bus on the DPO2000/MSO2000+ DPO3000/MSO3000 or the DPO4000/MSO4000?
1) It requires the application module DPOXCOMP.  X refers to the different model.  For example, DPO2000 requires the DPO2COMP.2) It uses the RS232 bus decode, however, the polarity need to be modified to “Inverted”There are two other types of …
常見問答集 ID59511
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
常見問答集 ID64571
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
常見問答集 ID66221
How do I utilize the measurement features on a DPO/MSO/MDO3000 and DPO/MSO/MDO4000 Series oscilloscope?
The Measurements are the same as the DPO/MSO2000 Series scopes. By going into the measurement menu you can add and remove up to 4 measurements. You can gate the measurements which allows you to only measure the part of the captured waveform that you …
常見問答集 ID64651
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
常見問答集 ID60156
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …
常見問答集 ID56386
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
常見問答集 ID64761
How do I run a Signal Path Compensation (SPC) on an DPO/MSO/MDO4000 Series oscilloscope?
Signal Path Compensation (SPC) should be run anytime you are getting DC offsets in your signals, or your scope has moved locations and might have changed temperature, or if it's been more then a month since your last SPC. This is a standard procedure …
常見問答集 ID64681
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread …
常見問答集 ID56996
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
常見問答集 ID64691
Will the probes I currently own work with on a DPO2000 (or MSO2000) series oscilloscope?
Use the Oscilloscope Probe & Accessory Selector Tool, available on www.tek.com, to determine if your probe is compatible with the DPO2000 (or MSO 2000) series oscilloscope.  After you have the tool open, under the “select by instrument series” …
常見問答集 ID60316
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
常見問答集 ID62256
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
常見問答集 ID63686
Are the DPO2AUTO+ DPO2COMP+ and DPO2EMBD Application Modules licensed to a specific MSO2000 or DPO2000 Series oscilloscope serial number? Are the DPO3AERO+ DPO3AUDIO+ DPO3AUTO+ DPO3COMP+ DPO3EMBD+ DPO3FLEX+ DPO3PWR+ and DPO3VID Application Modules licensed to a specific MSO3000 or DPO3000 Series oscilloscope serial number? Are the DPO4AERO+ DPO4AUDIO+ DPO4AUTO+ DPO4AUTOMAX+ DPO4COMP+ DPO4EMBD+ DPO4ENET+ DPO4USB+ DPO4LMT+ DPO4PWR+ MDO4TRIG+ and DPO4VID Application Modules licensed to a specific MDO4000, MSO4000 or DPO4000 Series oscilloscope serial number?
The application modules are not licensed to a specific oscilloscope serial number and can be swapped between the various models within the oscilloscope series.
常見問答集 ID55201
How do I send an oscilloscope BUS event table file to my PC?
Use the following commands:SAVe:EVENTtable:BUS (stores Bus Event table on the oscilloscope mass storage; CompactFlash card, USB flash drive)FILESystem:READFile (transfers stored Bus Event table file over the connection to the …
常見問答集 ID59471
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/  
常見問答集 ID59716
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
常見問答集 ID60251
Do you have a detailed application note on how to use DPO/MSO2000 Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO2000 / DPO2000 Series Lab Exercise Book for more details.
常見問答集 ID59261
Are MSO2000 and DPO2000 Series application modules compatible with MSO4000+ DPO4000+ MSO3000+ or DPO3000 Series oscilloscopes? Are MSO3000 and DPO3000 Series application modules compatible with MSO4000+ DPO4000+ MSO2000+ or DPO2000 Series oscilloscopes? Are MSO4000 and DPO4000 Series application modules compatible with MSO3000+ DPO3000+ MSO2000+ or DPO2000 Series oscilloscopes?
No.  Application modules are unique for each oscilloscope series, and cannot be used in other series oscilloscopes. They can be moved between oscilloscopes in the same series.
常見問答集 ID60351
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
常見問答集 ID64561
What is the difference between the DPO/MSO2000 and DPO/MSO2000B?
Features that were added in the B models of the scopes are a price reduction, the addition of four 70 MHz models and two 2-channel 200 MHz models, and the extension of the warranty to 5 years.
常見問答集 ID66186
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
常見問答集 ID62606
How do I save and load a reference waveform to a DPO/MSO3000 series oscilloscope?
This Video will explain how to setup, save and load a reference waveform. It can be done through a USB flash drive or by internal memory. This method for using reference waveforms can be applied to all MSO/DPO2000, MSO/DPO3000, MSO/DPO/MDO4000 …
常見問答集 ID64641
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
常見問答集 ID64771
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
常見問答集 ID63266
Active FET Probes

文件編號: 51W-23069-0
Datasheet
MSO2000B and DPO2000B Series
Oscilloscopes Specifications and Performance Verification Technical Reference

This document provides complete product specifications and may also explain how to verify that the product is performing according to the specifications
零件編號: 077073500
效能驗證
RMD2000
DPO2000 and MSO2000 Rackmount Kit

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.


零件編號: 071233200
現場安裝指示
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093812
驅動程式
DPO2000, MSO2000, DPO3000 and DPO4000, MSO3000 and MSO4000, MDO3000 and MDO4000 and MDO3 IVI Driver - V1.5
The Tektronix MSO/DPO2000, MDO/MSO/DPO3000, MDO/MSO/DPO4000 and MDO3 IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an …

零件編號: 066133104
驅動程式
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093811
驅動程式
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …

零件編號: 066093914
公用程式
TekVPI Probe Power Requirements on Digital Phosphor Oscilloscopes
This technical brief gives configuration information for using TekVPI probes with oscilloscopes that include the TekVPI probe interface. It gives the maximum internal probe power available from each oscilloscope series, and lists the power …

文件編號: 55W-28827-7
技術簡介
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

文件編號: 51W-60171-2
應用摘要
Oscilloscope Fundamentals: Capturing Your Signal in 3 Easy Steps Poster
This 11"x17" printable poster gives the basic steps for getting a stable waveform on an oscilloscope: setting the vertical scale, setting the horizontal scale, and setting the trigger.  It also includes critical steps for making connections (probing) …

文件編號: 3GW-60028-0
海報
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

文件編號: 46W-31080-7
選購指南
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …

文件編號: 55W-61095-0
應用摘要
混合訊號示波器
Tektronix MSO/DPO2000B 混合訊號示波器系列具有最高200 MHz 的頻寬與 1 GS/秒取樣率,能以入門級的價格提供先進的除錯功能。利用多達 20 個通道分析類比和數位訊號,迅速找出並診斷複雜設計中的問題。MSO/DPO2000B 所有通道均提供 1 M 點深度記錄長度 (標準),讓您擷取長時間訊號活動,並維持精細的時序解析度。

文件編號: 3GT-28413-8
Datasheet
Tektronix Toolbars for Microsoft Office, V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for Microsoft Excel and Microsoft Word.This version of Toolbars requires OpenChoice TekVISA v4.0.0 or higher be preinstalled on the PC or Windows based Oscilloscope.The Toolbar …

零件編號: 066133202
公用程式
DPO2000 MSO2000 Maintenance Release, Version 1.56
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414309
韌體
FIRMWARE TO SUPPORT MSODPO2000B OSCILLOSCOPES, V1.56
This firmware is an upgrade for all DPO2000B and MSO2000B Series oscilloscopes.

零件編號: 063447301
韌體
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093809
驅動程式
PILOT FIRMWARE TO SUPPORT MSODPO2000B OSCILLOSCOPES, V1.52
Firmware supports 70MHz 2 and 4 channel scopes in addition to 2 channel 200 MHz scopes.

零件編號: 063447300
韌體
DPO2000, DPO3000, DPO4000 IVI Driver
The Tektronix DPO2000, DPO3000, DPO4000 IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API …

零件編號: 066133101
驅動程式
DPO2000 MSO2000 Maintenance Release, Version 1.52
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414308
韌體
DPO2000 MSO2000 Maintenance Release V1.39
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414307
韌體
DPO2000 MSO2000 Maintenance Release V1.35
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414306
韌體
DPO2000 MSO2000 Maintenance Release V1.29
DPO2000/MSO2000 V1.29 update to replace V1.25 or earlier. This firmware image contains a change to the front panel microprocessor code to improve front panel knob operation, making it smoother and more linear.

零件編號: 063414304
韌體
NI SIGNALEXPRESS TEKTRONIX EDITION v2.5.1
National Instruments SignalExpress(tm) Tektronix Edition provides the industry's first true USB plug-n-play connectivity for instrumentation offering an intuitive drag-and-drop user interface that does not require any programming. SignalExpress(tm) …

零件編號: 066077003
應用
深入瞭解示波器
閱讀本入門手冊之後,您將能夠:描述示波器的工作方式描述各種示波器之間的差異描述電氣波形類型,瞭解基本示波器控制功能進行簡單的量測

文件編號: 03Z-8605-7
初階
Smiths Detection Relies on Tektronix to Take the Trouble out of Troubleshooting
A team of engineers at Smith Detection needed to quickly, efficiently and accurately identify and resolve problems during the development of complex handheld devices. Learn how Smith Detection engineers used Tektronix bench instruments to identify a …

文件編號: 48W-24397-0
技術簡介
10個示波器選型的考量因素
本指南將快速介紹決定示波器是否適用於當前工作的關鍵因素。  

文件編號: 3GW_60848_1
小冊子
Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing …

文件編號: 51W-60161-3
應用摘要
2013年桌上型測試儀器產品型錄
提供了Tektronix桌上型儀器的最新產品細節和規格,包括:基礎和桌上型示波器、數位萬用電錶、電源供應器、計頻器/計時器和訊號產生器。

文件編號: 48T-25025-8
選購指南
電源供應器量測與分析入門手冊
本入門手冊著重於以示波器和特定應用軟體,進行切換模式電源供應器設計的量測。

文件編號: 55T-18412-6
初階
Wave Inspector® 簡化波形分析作業
現代的數位示波器可擷取大量資料,且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能,如何提供工具,讓您快速有效率地找出所要的答案。

文件編號: 48T-19039-9
應用摘要
選擇正確的桌上型示波器指南
《桌上型示波器選型指南》強調 MSO / DPO 系列的創新性以及強大的功能和好處。多達 20 個類比通道和數位通道,以及自動的串列和並列匯流排分析功能,MSO / DPO 系列提供了簡化和加速複雜設計的除錯程序所需的功能豐富工具。 

文件編號: 3GW-24014-1
選購指南
Troubleshooting Three Phase Permanent Magnet AC Motor Using Tektronix MSO2024 Oscilloscope
This paper describes troubleshooting motor controls in a solar-powered vehicle using an MSO2000 Series Mixed Signal Oscilloscope.  Written by members of the Oregon State University Solar Vehicle Team, winners of the Formula Sun Grand Prix.

文件編號: 3GW-30483-0
白皮書
使用 Tektronix 示波器和選配軟體提供串列支援
Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。

文件編號: 55W-29028-13
選購指南
Making MicroVolt Biomedical Measurements
Learn how paying attention to grounding, isolation, and probe shielding can produce very refined biomedical measurement, inexpensively.

文件編號: 48W-28061-0
技術簡介
因應充滿雜訊的訊號:可簡化您量測的示波器工具
雜訊是電路中常見的普遍問題。瞭解您示波器的功能有助於處理雜訊,包括創新的 FilterVu™ 可變低通濾波器  (僅適用於 Tektronix MSO/DPO2000 系列示波器)。

文件編號: 3GK-22049-0
應用摘要
嵌入式系統設計中的低速串列匯流排除錯
當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。

文件編號: 48W-19040-21
應用摘要
使用混合訊號示波器進行數位除錯的訣竅
隨著電子產品變得更為快速複雜,其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計,以確保可靠的產品運作。問題發生時,設計人員需要迅速地深入瞭解問題的根源,以解決問題。藉由同時分析類比與數位呈現的訊號,更快速找出眾多數位問題的根源,這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。

文件編號: 3GT-24008-4
應用摘要
Tektronix MSODPO2000B系列与Rigol DS1000B系列比較
提供重要功能的對照比較,例如串列觸發與解碼、波形瀏覽與搜尋、波形擷取率、嵌入式系統除錯等等

文件編號: 3GT-28434-0
競爭優勢
Tektronix 探棒選擇指南
Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。

文件編號: 60W_14232_10
產生選擇器指南
RC4 Wireless Lights It Up with Tektronix MSO2000 Series
James Smith at RC4 develops custom wireless dimming and control products, for high-profile clients like Cirque du Soleil and Disney. Find out how James used the MSO2024 to shave hours off troubleshooting, and what impressed James so much that he …

文件編號: 3GW-24465-0
個案研究
MSO/DPO2000B 系列與 Rigol DS2000 系列(英)
Tektronix MSO/DPO2000B 系列示波器與 Rigol DSO2000 系列示波器的比較結果。

文件編號: 3GW-28435-2
競爭優勢
Tektronix MSO/DPO2000 系列 vs. Agilent MSO/DSO2000 系列
提供重要功能的對照比較,例如串列觸發與解碼、波形瀏覽與搜尋、波形擷取率、嵌入式系統除錯等等。

文件編號: 3GT-26814-0
競爭優勢
Tektronix MSO/DPO2000系列示波器與Agilent DSO1000A系列示波器比較
Tektronix MSO/DPO2000系列示波器與Agilent DSO1000A系列示波器比較

文件編號: 3GT-24447-0
競爭優勢
MSO/DPO2000B 系列與 Rigol DS1000C(英)
Tektronix MSO/DPO2000B系列示波器與 Rigol DSO1000C 系列示波器的比較。

文件編號: 3GW-22824-1
競爭優勢
MSO/DPO2000B 系列與Agilent/Keysight X2000 系列(英)
"瞭解示波器的真正價值比較示波器時,別忘了看看示波器的「真正」價值。Tektronix 桌上型示波器提供了各種內建的創新功能,有助於您更快完成工作。而且,示波器還標配了一套完整的探棒和附件,開箱後即可開始執行測試。"

文件編號: 48W-30248-0
競爭優勢
MSO/DPO2000B Series vs. R&S HMO1002 Series
Review the comparison of the MSO/DPO2000B Series and the R&S HMO1002 Series.

文件編號: 3GW-30640-1
競爭優勢
MSO2000/B and DPO2000/B Series
Oscilloscopes Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
零件編號: 077010801
解除機密
MSO2000B and DPO2000B Series
Oscilloscopes User Manual

This MSO2000B and DPO2000B series Installation and Safety Manual explains basic safety and installation procedures.
零件編號: 071307801
使用者
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series
Oscilloscopes Programmer Manual

This manual explains the use of commands for remotely controlling your oscilloscope.
零件編號: 077073800
程式設計師
MSO/DPO2000B and MSO/DPO2000 Series
Oscilloscopes Application Module Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071233001
現場安裝指示
MSO2000B and DPO2000B Series
Oscilloscopes User Manual

本 MSO2000B 和 DPO2000B 系列使用者手冊說明如何操作示波器並包含安裝程序。其中還提供與特性、功能和應用有關的資訊。
零件編號: 077073200
主要使用者
MSO2000B and DPO2000B Series
Oscilloscopes User Manual

This MSO2000B and DPO2000B series Installation and Safety Manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications.
零件編號: 071307800
使用者
DPO2CONN
Connectivity Module for MSO/DPO2000B and MSO/DPO2000 Series Oscilloscopes Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071234601
現場安裝指示
DPO2000 and MSO2000 Series
Oscilloscopes User Manual

This MSO2000 and DPO2000 series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications.
零件編號: 071231902
主要使用者
Educator's Resource Kit
Resource Kit for Educator's Instructions

This introduction to the Educator's Resource Kit lists the kit contents, how to locate signals on the training board, and compliance information for the training board.
零件編號: 071269200
使用者
DPO2000 and MSO2000 Series Rev A
Oscilloscopes Programmer Manual

This manual explains the use of commands for remotely controlling your oscilloscope.
零件編號: 077009701
程式設計師
MSO/DPO2000、MSO/DPO3000 和 MSO/DPO4000 系列 示波器
試用電路板 2 操作手冊 Instruction Manual

This MSO2000, DPO2000, MSO3000, DPO3000, MSO4000 and DPO4000 Series Oscilloscope Demo 2 Board Instruction Manual provides examples to help you learn how to use the oscilloscope.
零件編號: 077010501
使用者
DPO2000 and MSO2000 Series
RMD2000 Rackmount Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071233200
現場安裝指示
DPO2CONN Installation Manual
Connectivity Module for DPO/MSO2000 Series Oscilloscopes Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071234600
現場安裝指示
DPO2000 and MSO2000 Series
Oscilloscope Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
零件編號: 077010800
解除機密
DPO2000 and MSO2000 Series
Application Module Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071233000
現場安裝指示
DPO2000 and MSO2000 Series
Oscilloscopes Service Manual

This Service manual provides adjustment, troubleshooting, and repair information, to repair the oscilloscope to the module level
零件編號: 071233100
服務
DPO2000 and MSO2000 Series
Oscilloscopes Specifications and Performance Verification Technical Reference

This document provides complete product specifications and may also explain how to verify that the product is performing according to the specifications
零件編號: 077009600
效能驗證
1101A, 1102, 1103
Power Supplies Instruction Manual

This document contains information that supports basic instrument operation as well as how to service to the module level.
零件編號: 070827602
主要使用者
Measurement Data Logging with TekBench Oscilloscope Control Software
This application note describes how to use TekBench™ Software and a Tektronix oscilloscope to perform measurement data logging for evaluating a design’s reliability in a room temperature environment, such as a project laboratory.

文件編號: 61W-61442-0
應用摘要
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64796
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
常見問答集 ID69186
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
常見問答集 ID64656
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/  
常見問答集 ID59716
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
常見問答集 ID60251
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
常見問答集 ID64706
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
常見問答集 ID69176
What are the maximum power draw ratings for the DPO2000/B and MSO2000/B series oscilloscopes+ TEKVPI probes+ and TPA-BNC adapter?
Please see the table link below
常見問答集 ID59896
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
常見問答集 ID69181
How do I order the DPO Demo 2 board and the USB cable (020-2924-XX) used in the DPO2000/MSO2000+ DPO3000/MSO3000 and DPO2000/MSO4000 Series Lab Exercise Book?
Email the request with part number (020-2924-xx) to [email protected] or call 1-800-833-9200 prompt 1 for sales.
常見問答集 ID59461
What is the difference between the DPO/MSO2000 and DPO/MSO2000B?
Features that were added in the B models of the scopes are a price reduction, the addition of four 70 MHz models and two 2-channel 200 MHz models, and the extension of the warranty to 5 years.
常見問答集 ID66186
How to decode the RS422 or RS485 bus on the DPO2000/MSO2000+ DPO3000/MSO3000 or the DPO4000/MSO4000?
1) It requires the application module DPOXCOMP.  X refers to the different model.  For example, DPO2000 requires the DPO2COMP.2) It uses the RS232 bus decode, however, the polarity need to be modified to “Inverted”There are two other types of …
常見問答集 ID59511
Is the .ISF waveform file format file used on the DPO2000+ MSO2000+ DPO3000+ MSO3000+ DPO4000 and MSO4000 series compatible with the TDS3000/TDS3000B/TDS3000C format files?
No.   The formats are very similar, but they are not compatible.
常見問答集 ID63781
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
常見問答集 ID60156
How do I save and load a reference waveform to a DPO/MSO3000 series oscilloscope?
This Video will explain how to setup, save and load a reference waveform. It can be done through a USB flash drive or by internal memory. This method for using reference waveforms can be applied to all MSO/DPO2000, MSO/DPO3000, MSO/DPO/MDO4000 …
常見問答集 ID64641
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
常見問答集 ID64756
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread …
常見問答集 ID56996
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
常見問答集 ID64771
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
常見問答集 ID62256
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
常見問答集 ID56456
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
常見問答集 ID63266
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
常見問答集 ID53511
How can I disable "Autoset" on the DPO2000+ MSO2000+ DPO3000+ MSO3000+ DPO4000 or MSO4000 series oscilloscope?
1. Press and hold Autoset.2. Press and hold Menu Off.3. Release Menu Off, and then release Autoset.This will open the Autoset menu options.  You may now select either Enable or Disable. 
常見問答集 ID59391
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
常見問答集 ID60041
Do you have a detailed application note on how to use DPO/MSO2000 Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO2000 / DPO2000 Series Lab Exercise Book for more details.
常見問答集 ID59261
Are MSO2000 and DPO2000 Series application modules compatible with MSO4000+ DPO4000+ MSO3000+ or DPO3000 Series oscilloscopes? Are MSO3000 and DPO3000 Series application modules compatible with MSO4000+ DPO4000+ MSO2000+ or DPO2000 Series oscilloscopes? Are MSO4000 and DPO4000 Series application modules compatible with MSO3000+ DPO3000+ MSO2000+ or DPO2000 Series oscilloscopes?
No.  Application modules are unique for each oscilloscope series, and cannot be used in other series oscilloscopes. They can be moved between oscilloscopes in the same series.
常見問答集 ID60351
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
常見問答集 ID64561
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
常見問答集 ID60416
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
常見問答集 ID62606
I have captured waveform data as .isf files. I want to know which software can convert .isf to .png or .jpg.
If the .isf file was captured on the DPO2000/MSO2000, DPO3000/MSO3000, DPO4000/MSO4000 series scope, you could open it with OpenChoice Desktop software. Or you could recall the waveform into the scope as a reference waveform, and then save on the …
常見問答集 ID61871
What communication modules can I use with my oscilloscope?
Please go to the "Supported Data Interfaces" section of www.tek.com/products/oscilloscopes/supported_printers.pdf.
常見問答集 ID64051
How do I run a Signal Path Compensation (SPC) on an DPO/MSO/MDO4000 Series oscilloscope?
Signal Path Compensation (SPC) should be run anytime you are getting DC offsets in your signals, or your scope has moved locations and might have changed temperature, or if it's been more then a month since your last SPC. This is a standard procedure …
常見問答集 ID64681
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
常見問答集 ID64691
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
常見問答集 ID64781
How do I use the Save and Recall functionality of the MDO4000 series oscilloscope?
To save a screen image, go to the Save/Recall menu at the bottom of the scope. From there select the Save Screen Image softkey. This will pop up a new window with saving options. Saving a screen image requires an external memory device, such as a USB …
常見問答集 ID69156
What does USBTMC mean?
USBTMC stands for USBTest and Measurement Class and allows GPIB-style communication over USB using USBTMC-compliant VISA layers.
常見問答集 ID56056
Why does the DPO2000 or MSO2000 series oscilloscope sometimes present the record length selections as 100k and 1.00M but other times it presents 125k and 1.25M+ or 125k and 1.00M?
Here are the rules to understand when a record length is available:For the "short" record lengths: 100k record lengths: Time/Div <= 40us (40 us/div and faster) 125k record lengths: Time/Div >= 100us (100 us/div and slower)For the "long" record …
常見問答集 ID60256
Does NI LabVIEW SignalExpress Tektronix Edition version 2.51 work with the MSO2000+ DPO2000+ MSO3000+ DPO3000+ MSO4000+ and DPO4000 Series oscilloscopes?
NI LabVIEW SignalExpress TE does work with the MSO/DPO series, with two main caveats:NI SignalExpress TE only acquires the analog channel data, not the digital channels or bus waveforms.The step used for the MSO3000 is the same step used for the …
常見問答集 ID63376
My Tektronix oscilloscope uses the Linux operating system.  Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the …
常見問答集 ID64866
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
常見問答集 ID64666
Where can I find an IVI driver for TDS200+ TDS1000/TDS2000+ TDS1000B/TDS2000B+ TDS2000C+ TPS2000+ TDS3000/TDS3000B/TDS3000C+ DPO2000/MSO2000+ DPO3000/MSO3000+ DPO4000/MSO4000 series?
IVI drivers to support LabView, LabWindows/CVI, and LabView SignalExpress can be found on the National Instruments Developer Zone, http://zone.ni.com/.For MSO3000 series please use the drivers posted for the DPO3000 series.For MSO4000 series please …
常見問答集 ID60176
I have connected my MSO2000 (or DPO2000) series oscilloscope to a PictBridge printer using a USB-B to USB-B cable. But nothing is printing on the printer when I press the print button. What is wrong?
You should be using a USB-B to USB-A cable.  Connect the USB-B end of the cable to the instrument rear panel USB device port (marked with PictBridge symbol), and connect the USB-A end of the cable to the USB host port (marked with PictBridge symbol) …
常見問答集 ID59556
Where Do I Download USB Device Driver For Tektronix USB Instruments?
Tektronix USB instruments use and require a generic USB Device Driver, referred to as a USB Test & Measurement Class driver or USBTMC driver. USBTMC is a subclass of the USB specification.  This driver is typically included with the Virtual …
常見問答集 ID60216
How do I clear my memory using TekSecure on a MSO/DPO/MDO4000 Series oscilloscope?
This procedure for clearing the memory on oscilloscope can be applied to the DPO/MSO/MDO4000, DPO/MSO3000 and DPO/MSO2000 Series oscilloscope families. By clearing the memory you will lose all saved reference waveforms, saved setups and all other …
常見問答集 ID64686
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
常見問答集 ID64776
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.   For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
常見問答集 ID59166
What are the differences for the MSO/DPO2000 and MSO/DPO2000B series?
The differences are that the MSO/DPO2000B offer the 70MHz models and a standard 5 years warranty instead of the 3 years warranty.
常見問答集 ID64811
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
常見問答集 ID60306
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
常見問答集 ID54941
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
常見問答集 ID56226
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
常見問答集 ID66181
Is the .ISF waveform file format file used on the DPO2000/MSO2000+ DPO3000/MSO3000+ DPO4000/MSO4000 series compatible with the Arb Express software?
The DPO2000/MSO2000, DPO3000/MSO3000, DPO/MSO4000 series format files cannot be imported into Arb Express.
常見問答集 ID63786
Where can I find the manual for the application module for my MSO2000+ DPO2000+ MSO3000+ DPO3000+ MSO4000+ or DPO4000 series oscilloscope?
The application modules are all addressed in the user manual for your oscilloscope. Only the power analysis module (DPO3PWR and DPO4PWR) has its own user manual.You could also refer to the Lab Exercise Book for different series oscilloscope in the …
常見問答集 ID60191
Does the MSO4000+ MSO3000+ or MSO2000 series support the TLAHRA high impedance probe adapter?
This accessory is compatible with the P6516 and P6316 logic probes.
常見問答集 ID61681
How do I erase and declassify an MSO/DPO2000, MSO/DPO/MDO3000, and MSO/DPO/MDO4000 Series oscilloscope?
This example will show you how to declassify the MDO4000/B/C Series oscilloscope. This procedure also applies to the MSO/DPO4000/B, MSO/DPO/MDO3000, and the MSO/DPO2000/B series of oscilloscope.The first step in the declassification process is …
常見問答集 ID66231
We have a classroom where we need to project the screen of an oscilloscope. Being a school+ what is the lowest cost solution for connecting a projector to a scope?
The lowest cost solution is to use the DPO2012 with the DPO2CONN module. It provides a VGA output of the screen, as well as the Ethernet port for PC connectivity.
常見問答集 ID63991
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常見問答集 ID64791
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
常見問答集 ID58571
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
常見問答集 ID56016
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
常見問答集 ID247211
Do I need a TekVPI power adapter part number 119-8726-00 (previous p/n was 119-7465-xx) for each probe I connect to my DPO2000/B and MSO2000/B series oscilloscope? How does the power adapter connect the oscilloscope?
No. Only 1 power adapter is needed per oscilloscope.  The power adapter provides 50 W of power which is sufficient to support any combination of compatible probes used on channels 1, 2, 3, 4 and aux in. To connect the TekVPI power adapter, simply …
常見問答集 ID59221
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
常見問答集 ID64251
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
常見問答集 ID64571
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
常見問答集 ID66221
How do I utilize the measurement features on a DPO/MSO/MDO3000 and DPO/MSO/MDO4000 Series oscilloscope?
The Measurements are the same as the DPO/MSO2000 Series scopes. By going into the measurement menu you can add and remove up to 4 measurements. You can gate the measurements which allows you to only measure the part of the captured waveform that you …
常見問答集 ID64651
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …
常見問答集 ID56386
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
常見問答集 ID64761
Where is the "Invert" button on my DPO2000 or the MSO2000?
If you have older firmware version v1.06 or below, you will need to use the Math function on the oscilloscope to subtract the channel of interest from another channel that is set to ground coupling in order to get the invert function.The invert …
常見問答集 ID60221
Will the probes I currently own work with on a DPO2000 (or MSO2000) series oscilloscope?
Use the Oscilloscope Probe & Accessory Selector Tool, available on www.tek.com, to determine if your probe is compatible with the DPO2000 (or MSO 2000) series oscilloscope.  After you have the tool open, under the “select by instrument series” …
常見問答集 ID60316
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
常見問答集 ID59621
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
常見問答集 ID63686
Are the DPO2AUTO+ DPO2COMP+ and DPO2EMBD Application Modules licensed to a specific MSO2000 or DPO2000 Series oscilloscope serial number? Are the DPO3AERO+ DPO3AUDIO+ DPO3AUTO+ DPO3COMP+ DPO3EMBD+ DPO3FLEX+ DPO3PWR+ and DPO3VID Application Modules licensed to a specific MSO3000 or DPO3000 Series oscilloscope serial number? Are the DPO4AERO+ DPO4AUDIO+ DPO4AUTO+ DPO4AUTOMAX+ DPO4COMP+ DPO4EMBD+ DPO4ENET+ DPO4USB+ DPO4LMT+ DPO4PWR+ MDO4TRIG+ and DPO4VID Application Modules licensed to a specific MDO4000, MSO4000 or DPO4000 Series oscilloscope serial number?
The application modules are not licensed to a specific oscilloscope serial number and can be swapped between the various models within the oscilloscope series.
常見問答集 ID55201
How do I send an oscilloscope BUS event table file to my PC?
Use the following commands:SAVe:EVENTtable:BUS (stores Bus Event table on the oscilloscope mass storage; CompactFlash card, USB flash drive)FILESystem:READFile (transfers stored Bus Event table file over the connection to the …
常見問答集 ID59471
What are the key differences between the TBS2000, MSO/DPO2000B, TBS1000B, and TDS2000C oscilloscopes?
Below is a condensed table of key specifications of this range of oscilloscopes. More information can be found on the data sheets or in the manuals of each of the oscilloscope product lines. Note that there are feature options available to each …
常見問答集 ID72201
Why does the Tkdpo2k3k4k_ReadWaveform() function in the Tkdpo2k3k4k IVI-C driver time out every time I call it when I am connected to the instrument via Ethernet? The function call works fine over USB, but over Ethernet it always times out.
The Tkdpo2k3k4k_ReadWaveform() function makes use of the Service Request Event in VISA so the scope can notify the driver when it has completed its acquisition and the waveform data is ready to be fetched as opposed to the driver polling the scope …
常見問答集 ID72221
Are LabView drivers available for the DPO2000+ MSO2000+ DPO3000+ MSO3000+DPO4000+ and MSO4000 series oscilloscopes?
A. IVI drivers to support LabView, LabWindows/CVI, and LabView SignalExpress can be found on the National Instrument website. Go to www.ni.com, search on "instrument drivers", and then search by specific model number.The MSO4000, DPO4000, MSO3000 …
常見問答集 ID60341
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
常見問答集 ID474266
I am experiencing front panel operational issues with my MSO/DPO2000 and MSO/DPO3000.  At times the front panel controls are inoperative or my cursors do not move normally or scaling does not work. 
This could be related to the instrument software currently installed on your instrument.  Check to see what software version is currently installed on your instrument. For a MSO/DPO3000, should have software V2.16 or greater For a MSO/DPO2000, should …
常見問答集 ID64581
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
常見問答集 ID64751
Active FET Probes

文件編號: 51W-23069-0
Datasheet
MSO2000B and DPO2000B Series
Oscilloscopes Specifications and Performance Verification Technical Reference

This document provides complete product specifications and may also explain how to verify that the product is performing according to the specifications
零件編號: 077073500
效能驗證
RMD2000
DPO2000 and MSO2000 Rackmount Kit

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.


零件編號: 071233200
現場安裝指示
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093812
驅動程式
DPO2000, MSO2000, DPO3000 and DPO4000, MSO3000 and MSO4000, MDO3000 and MDO4000 and MDO3 IVI Driver - V1.5
The Tektronix MSO/DPO2000, MDO/MSO/DPO3000, MDO/MSO/DPO4000 and MDO3 IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an …

零件編號: 066133104
驅動程式
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093811
驅動程式
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …

零件編號: 066093914
公用程式
TekVPI Probe Power Requirements on Digital Phosphor Oscilloscopes
This technical brief gives configuration information for using TekVPI probes with oscilloscopes that include the TekVPI probe interface. It gives the maximum internal probe power available from each oscilloscope series, and lists the power …

文件編號: 55W-28827-7
技術簡介
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

文件編號: 51W-60171-2
應用摘要
Oscilloscope Fundamentals: Capturing Your Signal in 3 Easy Steps Poster
This 11"x17" printable poster gives the basic steps for getting a stable waveform on an oscilloscope: setting the vertical scale, setting the horizontal scale, and setting the trigger.  It also includes critical steps for making connections (probing) …

文件編號: 3GW-60028-0
海報
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

文件編號: 46W-31080-7
選購指南
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …

文件編號: 55W-61095-0
應用摘要
混合訊號示波器
Tektronix MSO/DPO2000B 混合訊號示波器系列具有最高200 MHz 的頻寬與 1 GS/秒取樣率,能以入門級的價格提供先進的除錯功能。利用多達 20 個通道分析類比和數位訊號,迅速找出並診斷複雜設計中的問題。MSO/DPO2000B 所有通道均提供 1 M 點深度記錄長度 (標準),讓您擷取長時間訊號活動,並維持精細的時序解析度。

文件編號: 3GT-28413-8
Datasheet
Tektronix Toolbars for Microsoft Office, V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for Microsoft Excel and Microsoft Word.This version of Toolbars requires OpenChoice TekVISA v4.0.0 or higher be preinstalled on the PC or Windows based Oscilloscope.The Toolbar …

零件編號: 066133202
公用程式
DPO2000 MSO2000 Maintenance Release, Version 1.56
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414309
韌體
FIRMWARE TO SUPPORT MSODPO2000B OSCILLOSCOPES, V1.56
This firmware is an upgrade for all DPO2000B and MSO2000B Series oscilloscopes.

零件編號: 063447301
韌體
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

零件編號: 066093809
驅動程式
PILOT FIRMWARE TO SUPPORT MSODPO2000B OSCILLOSCOPES, V1.52
Firmware supports 70MHz 2 and 4 channel scopes in addition to 2 channel 200 MHz scopes.

零件編號: 063447300
韌體
DPO2000, DPO3000, DPO4000 IVI Driver
The Tektronix DPO2000, DPO3000, DPO4000 IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API …

零件編號: 066133101
驅動程式
DPO2000 MSO2000 Maintenance Release, Version 1.52
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414308
韌體
DPO2000 MSO2000 Maintenance Release V1.39
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414307
韌體
DPO2000 MSO2000 Maintenance Release V1.35
This firmware is an upgrade for all DPO2000 and MSO2000 Series oscilloscopes.

零件編號: 063414306
韌體
DPO2000 MSO2000 Maintenance Release V1.29
DPO2000/MSO2000 V1.29 update to replace V1.25 or earlier. This firmware image contains a change to the front panel microprocessor code to improve front panel knob operation, making it smoother and more linear.

零件編號: 063414304
韌體
NI SIGNALEXPRESS TEKTRONIX EDITION v2.5.1
National Instruments SignalExpress(tm) Tektronix Edition provides the industry's first true USB plug-n-play connectivity for instrumentation offering an intuitive drag-and-drop user interface that does not require any programming. SignalExpress(tm) …

零件編號: 066077003
應用
深入瞭解示波器
閱讀本入門手冊之後,您將能夠:描述示波器的工作方式描述各種示波器之間的差異描述電氣波形類型,瞭解基本示波器控制功能進行簡單的量測

文件編號: 03Z-8605-7
初階
Smiths Detection Relies on Tektronix to Take the Trouble out of Troubleshooting
A team of engineers at Smith Detection needed to quickly, efficiently and accurately identify and resolve problems during the development of complex handheld devices. Learn how Smith Detection engineers used Tektronix bench instruments to identify a …

文件編號: 48W-24397-0
技術簡介
10個示波器選型的考量因素
本指南將快速介紹決定示波器是否適用於當前工作的關鍵因素。  

文件編號: 3GW_60848_1
小冊子
Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing …

文件編號: 51W-60161-3
應用摘要
2013年桌上型測試儀器產品型錄
提供了Tektronix桌上型儀器的最新產品細節和規格,包括:基礎和桌上型示波器、數位萬用電錶、電源供應器、計頻器/計時器和訊號產生器。

文件編號: 48T-25025-8
選購指南
電源供應器量測與分析入門手冊
本入門手冊著重於以示波器和特定應用軟體,進行切換模式電源供應器設計的量測。

文件編號: 55T-18412-6
初階
Wave Inspector® 簡化波形分析作業
現代的數位示波器可擷取大量資料,且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能,如何提供工具,讓您快速有效率地找出所要的答案。

文件編號: 48T-19039-9
應用摘要
選擇正確的桌上型示波器指南
《桌上型示波器選型指南》強調 MSO / DPO 系列的創新性以及強大的功能和好處。多達 20 個類比通道和數位通道,以及自動的串列和並列匯流排分析功能,MSO / DPO 系列提供了簡化和加速複雜設計的除錯程序所需的功能豐富工具。 

文件編號: 3GW-24014-1
選購指南
Troubleshooting Three Phase Permanent Magnet AC Motor Using Tektronix MSO2024 Oscilloscope
This paper describes troubleshooting motor controls in a solar-powered vehicle using an MSO2000 Series Mixed Signal Oscilloscope.  Written by members of the Oregon State University Solar Vehicle Team, winners of the Formula Sun Grand Prix.

文件編號: 3GW-30483-0
白皮書
使用 Tektronix 示波器和選配軟體提供串列支援
Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。

文件編號: 55W-29028-13
選購指南
Making MicroVolt Biomedical Measurements
Learn how paying attention to grounding, isolation, and probe shielding can produce very refined biomedical measurement, inexpensively.

文件編號: 48W-28061-0
技術簡介
因應充滿雜訊的訊號:可簡化您量測的示波器工具
雜訊是電路中常見的普遍問題。瞭解您示波器的功能有助於處理雜訊,包括創新的 FilterVu™ 可變低通濾波器  (僅適用於 Tektronix MSO/DPO2000 系列示波器)。

文件編號: 3GK-22049-0
應用摘要
嵌入式系統設計中的低速串列匯流排除錯
當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。

文件編號: 48W-19040-21
應用摘要
使用混合訊號示波器進行數位除錯的訣竅
隨著電子產品變得更為快速複雜,其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計,以確保可靠的產品運作。問題發生時,設計人員需要迅速地深入瞭解問題的根源,以解決問題。藉由同時分析類比與數位呈現的訊號,更快速找出眾多數位問題的根源,這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。

文件編號: 3GT-24008-4
應用摘要
Tektronix MSODPO2000B系列与Rigol DS1000B系列比較
提供重要功能的對照比較,例如串列觸發與解碼、波形瀏覽與搜尋、波形擷取率、嵌入式系統除錯等等

文件編號: 3GT-28434-0
競爭優勢
Tektronix 探棒選擇指南
Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。

文件編號: 60W_14232_10
產生選擇器指南
RC4 Wireless Lights It Up with Tektronix MSO2000 Series
James Smith at RC4 develops custom wireless dimming and control products, for high-profile clients like Cirque du Soleil and Disney. Find out how James used the MSO2024 to shave hours off troubleshooting, and what impressed James so much that he …

文件編號: 3GW-24465-0
個案研究
MSO/DPO2000B 系列與 Rigol DS2000 系列(英)
Tektronix MSO/DPO2000B 系列示波器與 Rigol DSO2000 系列示波器的比較結果。

文件編號: 3GW-28435-2
競爭優勢
Tektronix MSO/DPO2000 系列 vs. Agilent MSO/DSO2000 系列
提供重要功能的對照比較,例如串列觸發與解碼、波形瀏覽與搜尋、波形擷取率、嵌入式系統除錯等等。

文件編號: 3GT-26814-0
競爭優勢
Tektronix MSO/DPO2000系列示波器與Agilent DSO1000A系列示波器比較
Tektronix MSO/DPO2000系列示波器與Agilent DSO1000A系列示波器比較

文件編號: 3GT-24447-0
競爭優勢
MSO/DPO2000B 系列與 Rigol DS1000C(英)
Tektronix MSO/DPO2000B系列示波器與 Rigol DSO1000C 系列示波器的比較。

文件編號: 3GW-22824-1
競爭優勢
MSO/DPO2000B 系列與Agilent/Keysight X2000 系列(英)
"瞭解示波器的真正價值比較示波器時,別忘了看看示波器的「真正」價值。Tektronix 桌上型示波器提供了各種內建的創新功能,有助於您更快完成工作。而且,示波器還標配了一套完整的探棒和附件,開箱後即可開始執行測試。"

文件編號: 48W-30248-0
競爭優勢
MSO/DPO2000B Series vs. R&S HMO1002 Series
Review the comparison of the MSO/DPO2000B Series and the R&S HMO1002 Series.

文件編號: 3GW-30640-1
競爭優勢
MSO2000/B and DPO2000/B Series
Oscilloscopes Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
零件編號: 077010801
解除機密
MSO2000B and DPO2000B Series
Oscilloscopes User Manual

This MSO2000B and DPO2000B series Installation and Safety Manual explains basic safety and installation procedures.
零件編號: 071307801
使用者
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series
Oscilloscopes Programmer Manual

This manual explains the use of commands for remotely controlling your oscilloscope.
零件編號: 077073800
程式設計師
MSO/DPO2000B and MSO/DPO2000 Series
Oscilloscopes Application Module Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071233001
現場安裝指示
MSO2000B and DPO2000B Series
Oscilloscopes User Manual

本 MSO2000B 和 DPO2000B 系列使用者手冊說明如何操作示波器並包含安裝程序。其中還提供與特性、功能和應用有關的資訊。
零件編號: 077073200
主要使用者
MSO2000B and DPO2000B Series
Oscilloscopes User Manual

This MSO2000B and DPO2000B series Installation and Safety Manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications.
零件編號: 071307800
使用者
DPO2CONN
Connectivity Module for MSO/DPO2000B and MSO/DPO2000 Series Oscilloscopes Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071234601
現場安裝指示
DPO2000 and MSO2000 Series
Oscilloscopes User Manual

This MSO2000 and DPO2000 series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications.
零件編號: 071231902
主要使用者
Educator's Resource Kit
Resource Kit for Educator's Instructions

This introduction to the Educator's Resource Kit lists the kit contents, how to locate signals on the training board, and compliance information for the training board.
零件編號: 071269200
使用者
DPO2000 and MSO2000 Series Rev A
Oscilloscopes Programmer Manual

This manual explains the use of commands for remotely controlling your oscilloscope.
零件編號: 077009701
程式設計師
MSO/DPO2000、MSO/DPO3000 和 MSO/DPO4000 系列 示波器
試用電路板 2 操作手冊 Instruction Manual

This MSO2000, DPO2000, MSO3000, DPO3000, MSO4000 and DPO4000 Series Oscilloscope Demo 2 Board Instruction Manual provides examples to help you learn how to use the oscilloscope.
零件編號: 077010501
使用者
DPO2000 and MSO2000 Series
RMD2000 Rackmount Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071233200
現場安裝指示
DPO2CONN Installation Manual
Connectivity Module for DPO/MSO2000 Series Oscilloscopes Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071234600
現場安裝指示
DPO2000 and MSO2000 Series
Oscilloscope Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
零件編號: 077010800
解除機密
DPO2000 and MSO2000 Series
Application Module Installation Manual

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
零件編號: 071233000
現場安裝指示
DPO2000 and MSO2000 Series
Oscilloscopes Service Manual

This Service manual provides adjustment, troubleshooting, and repair information, to repair the oscilloscope to the module level
零件編號: 071233100
服務
DPO2000 and MSO2000 Series
Oscilloscopes Specifications and Performance Verification Technical Reference

This document provides complete product specifications and may also explain how to verify that the product is performing according to the specifications
零件編號: 077009600
效能驗證
1101A, 1102, 1103
Power Supplies Instruction Manual

This document contains information that supports basic instrument operation as well as how to service to the module level.
零件編號: 070827602
主要使用者