下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

DSA8300

DSA8300 系列擁有低於 100 飛秒的固有抖動,具極準確的裝置特性,能提供 光通訊 標準、時域反射和 S 參數的全面性支援。DSA8300 數位取樣示波器是一個完整的高速實體層測試平臺,其資料通訊速度從 155Mb/秒到 400G PAM4。

功能

優點

電氣模組訊號量測準確度:

  • 超低系統抖動 (<100 fs,一般)
  • > 70GHz
<100 fs 固有抖動能夠分析高位元率裝置 (40 和 100 (4'25) Gb/秒) 的特性,透過測試儀通常會消耗 <5% 的訊號單位間隔時間。70 GHz 的頻寬可以充分分析高位元率訊號 (第 5 諧波資料傳輸率為 28 Gb/秒,第 3 諧波的資料傳輸率 >45 Gb/秒)。
在所有頻寬中具有業界最低系統雜訊:

  • 600 µV 最大值 (450 µV 典型) @ 60 GHz
  • 380 µV 最大值 (280 µV 典型) @ 30 GHz
擷取高位元率時具有最少的儀器雜訊,低振幅訊號本身可顯示為其他的抖動和眼圖閉合,可消除額外的雜訊。
可使用一台主機多達 6 個通道,在 <100 fs 的抖動下同時進行擷取。 多個差動通道的高完整性功能,能完成跨通道損壞的測試,並提高多個高速串列通道系統的測試輸送量。
光學模組支援 155 Gb/秒 和 100 Gb/秒 (4x25) 乙太網路的所有標準速率光學相容性測試。 為單模和多模光學標準提供符合成本效益的多用途光學測試系統,範圍自 155 Mb/s (OC3/STM1) 到 40 Gb/s (SONET/SDH 及 40GBase 乙太網路) 和 100 Gb/s 乙太網路 (100GBase-SR4、LR4 及 ER4),波長 850、1310 和 1550 nm。
高達 300 kS/秒最大取樣率的優越擷取輸送量。 具 4X 優越系統輸送量,縮短製造或裝置特性分析的測試時間。
能夠將取樣器放到待測裝置 (DUT) 附近。 遠端取樣探棒頭可將待測裝置和儀器佈線和夾具間所造成的訊號衰減降至最低,簡化了測試系統的去嵌入作業。
獨立校驗過的通道偏移校正功能。 具有雙通道模組整合的已校驗過通道的偏移校正,透過消除多通道量測偏移,能增強訊號的完整性。

 

機型 類比頻寬 取樣率 記錄長度 類比通道 參考價格
DSA8300 電子 70 GHz,光學 80 GHz 最高至 300 kS/秒 50 點 - 16,000 點 (IConnect® 1M 點,80SJNB 10M 點) 由使用的取樣模組決定,最多 8 個通道 配置和報價
機型 類比頻寬 取樣率 記錄長度 類比通道 參考價格
DSA8300 電子 70 GHz,光學 80 GHz 最高至 300 kS/秒 50 點 - 16,000 點 (IConnect® 1M 點,80SJNB 10M 點) 由使用的取樣模組決定,最多 8 個通道 配置和報價
產品規格表 軟體套件 / 軟體選項 說明 配置與報價
80SJNB01

抖動、雜訊和 BER 進階分析

Contact Us
檢視產品規格表 100G-SR4

100GBASE-SR4 的自動化相容性與除錯測試解決方案,以及發射器與分散眼狀狀圖閉合 (TDEC)

Contact Us
檢視產品規格表 Opt. 80S400G-TXO

IEEE 802.3bs (200GBASE-DR4/LR4/FR4 和 400GBASE-DR4/LR8/FR8) 和 IEEE 802.3cd (50GBASE-FR/LR 和 100GBASE-DR) 光學發射器相容性解決方案

Contact Us
檢視產品規格表 80SJNB PAM4

PAM4 調變分析的完整工具

Contact Us
檢視產品規格表 Opt. 400G-M4

400G Optical Manufacturing analysis software, 4 channel TDECQ

Contact Us
80SJNB, 80SJARB

抖動、雜訊和 BER 分析軟體。

Contact Us
檢視產品規格表 80SJNB02

SDLA Visualizer 包含抖動、雜訊和 BER 分析軟體

Contact Us
檢視產品規格表 Contact Us
檢視產品規格表 Contact Us
檢視產品規格表 Contact Us
檢視產品規格表 Contact Us
產品規格表連結 探棒 說明 配置與報價
配置和報價
檢視產品規格表 P8018 手持式 TDR 探棒,被動式;20 GHZ,單端,50 OHM,SMA 接頭 (含 20 GHZ SMA 纜線);專為搭配 80A02 EOS/ESD 保護模組使用所設計;本產品隨附相容性聲明 配置和報價
檢視產品規格表 P80318 探棒套件,18GHz 100 Ohm 差動手持式探棒 配置和報價
低壓單端探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 P6150 Passive Probe: 10X/1X, 9GHz, 12.5V low capacitance 配置和報價
低壓差動式探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 P7330 探棒;差動;3.5 GHz BW,+/-1.75 V 差動動態範圍,+5V -4V 共模範圍,2.3 MV RMS 輸入雜訊,5X 衰減 - 可追溯校驗標準證書 配置和報價
檢視產品規格表 P7350 DIFFERENTIAL PROBE, 5 GHZ 配置和報價
檢視產品規格表 P7380SMA 8 GHZ DIFFERENTIAL SIGNAL ACQUISITION SYSTEM WITH SMA INPUTS,CERTIFICATE OF TRACEABLE CALIBRATION STANDARD 配置和報價
產品規格表 模組 說明 配置與報價
檢視產品規格表 80C15 8000 系列光學模組:單一通道,32GHz 光學頻寬,單一/多重模式,800nm 至 1600nm 配置與報價
檢視產品規格表 80C21

8000 系列光學模組:雙通道,53GHz 光學頻寬,單一模式,1200nm 至 1650nm

配置與報價
檢視產品規格表 80C20

8000 系列光學模組:單一通道,53GHz 光學頻寬,單一模式,1200nm 至 1650nm

配置與報價
檢視產品規格表 80C17 8000 系列光學模組:單一通道,30GHz 光學頻寬,單一/多重模式,800nm 至 1600nm 配置與報價
檢視產品規格表 80C18 8000 系列光學模組:雙通道,30GHz 光學頻寬,單一/多重模式,800nm 至 1600nm 配置與報價
檢視產品規格表 80C08D 單通道光學取樣模組;10G 光學參考接收器濾波器;12 GHz 光學頻寬;單模/多模 配置與報價
檢視產品規格表 80A02 EOS/ESD 保護模組,適用於 TEKTRONIX 電子取樣模組的靜電隔離;本產品隨附相容性聲明 配置與報價
檢視產品規格表 80C07B 光學取樣模組;2.488 GB/S OC48/STM16、2.500 GB/S 2GBE、2.500 GB/S INFINIBAND;2.5 GHZ 光學頻寬 配置與報價
檢視產品規格表 80E04 取樣模組;雙通道,20 GHZ 配備 TDR 電子取樣模組 ─ 可追蹤校驗標準證書 配置與報價
檢視產品規格表 80E08B 8000 系列,雙通道 30 GHz 遠端電子取樣模組 (含 D1),配備 TDR 配置與報價
檢視產品規格表 80E09B 8000 系列,雙通道 60 GHz 遠端電子取樣模組 (含 D1) 配置與報價
檢視產品規格表 80E10B 8000 系列,雙通道 50 GHz 遠端電子取樣模組 (含 D1),配備 TDR 配置與報價
檢視產品規格表 80E07B 8000 系列,雙通道 30 GHz 遠端電子取樣模組 (含 D1) 配置與報價
檢視產品規格表 80E11 8000 系列,雙通道 70 GHz 超低抖動電子取樣模組 (含 D1) 配置與報價
檢視產品規格表 80E11X1 8000 系列,單通道 70 GHz 超低抖動電子取樣模組 (含 D1) 配置與報價
檢視產品規格表 80E03 取樣模組;雙通道,20 GHZ 電子取樣模組 ─ 可追蹤校驗標準證書 配置與報價
檢視產品規格表 80C10C 單通道 65/80 GHz 光學取樣模組 (必須指定 F1、F2 或 F3 其中一個選項) 配置與報價
檢視產品規格表 80C12B 12 GHz、廣域波長、放大光學取樣模組 配置與報價
檢視產品規格表 80C11B 單通道光學取樣模組;10G 光學參考接收器濾波器;28 GHz 光學頻寬;單模 配置與報價
檢視產品規格表 80C14 14+ GHz,廣域波長,放大光學取樣模組 配置與報價
檢視產品規格表 80N02 8000 Series Electrical Sampling Module Extender, 2M Cable 配置與報價
檢視產品規格表 82A04B 8000 系列,相位參考模組 (含 D1) 配置與報價
This webinar reviews TDR basics and the ability to create S-parameters using TDR/TDT measurements to validate high speed channels for debug or de-embedding in a Serial Data Link Analysis applicati...
Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design Segmen...
4m 37s
Learn how more margin and higher yields are made possible with lowest optical noise, highest sensitivity solution available today. See comprehensive characterization – TDECQ accuracy and visualiza...
View this demonstration of interoperability at OFC2013 using Tektronix DSA8300 Sampling Oscilloscope and BSA286C BERTScope. Tektronix assisted the Optical Internetworking Forum (OIF) and member co...
Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design Segmen...
2m 16s
With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This...
18m 33s
During ECOC 2014, Tektronix demonstrated 56 Gb/s Eye Diagram analysis on a DSA8300 Sampling Oscillocope.
Designing and developing 100G components, modules and systems requires the latest tools and techniques. In this video, you'll learn how to:Set up a complete system for active optical cable testing...
At this booth, we're demonstrating our DS8300 Digital Sampling Oscilloscope including new PAM4 software modules. 
At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300...
See how to conduct PAM-4 Analysis using PPG3204 Pattern Generator and DSA8300 Sampling Oscilloscope on multi-level eye diagrams.
2020 Tektronix and Keithley Product Catalog
We have the right products to ensure your success. Browse our new Tektronix and Keithley Product Catalog and explore our complete line of test and measurement solutions. You’ll find over 130 pages of key product details and specifications, applicat
選購指南 16 Jan 2020
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start Applicat
常見問答集 ID69181 15 Jan 2020
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 MSO2000 RMD2000 DPO3
常見問答集 ID64571 15 Jan 2020
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can
常見問答集 ID64561 15 Jan 2020
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to e
常見問答集 ID61606 15 Jan 2020
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the f
常見問答集 ID69346 15 Jan 2020
There is a check box which states: Start service at system power-up. I check the box but at next power on the box is unchecked and does not restart. How to make it stay checked?
Use the Window 7 search box and for search criteria us "User", select “Change User Account control Settings” Now run the bar all the way to the bottom (Never Notify) and reboot the scope.Now in VXI-11 server properties check “Start Server at System P
常見問答集 ID64746 15 Jan 2020
How do I verify which TekScope application software version supports a specific sampling module or is appropriate for the version of Microsoft Windows loaded on the Sampling scope mainframe?
Click Help > About in the TekScope application to show the current software version. Use the following tables with the attached document to find the product software version required for your module and instrument. If you need to download a newe
常見問答集 ID64601 15 Jan 2020
Is the WaveStar software Compatible with Win 7?
WaveStar is compatible with Win 7. Please refer to the attached doc for further details.
常見問答集 ID69501 15 Jan 2020
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the corr
常見問答集 ID69186 15 Jan 2020
Is the 80A06 compatible with the DSA8300?
The 80A06 is not compatible with the DSA8300.
常見問答集 ID69526 15 Jan 2020
Can I load my DSA8200 set up files into a DSA8300?
Yes, there is setup file conversion utility for the 8000 series sampling scopes. Below is an extract from the Readme file for the current 8300 scope firmware download:The 6.2 and later product software media contains an independentutility application
常見問答集 ID69336 15 Jan 2020
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be
常見問答集 ID467706 15 Jan 2020
I have  DSA8200 and a 80C15.  However the DSA8200 does not appear to recognize the 80C15.  Does the DSA8200 support the 80C15?
Yes the DSA8200 supports the 80C15 if the DSA8200 has firmware version V5.2.1.2 or later.
常見問答集 ID247201 15 Jan 2020
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such
常見問答集 ID69266 15 Jan 2020
DSA8300 Datasheet
The DSA8300 is a state-of-the-art Equivalent Time Sampling Oscilloscope that provides the highest fidelity measurement and analysis capabilities for Communications Signal Analysis, Serial Data Network Analysis, and Serial Data Link Analysis applicat

文件編號: 85W-26988-21
Datasheet 12 Jan 2020
How do I upgrade the 80A03 firmware?
The firmware upgrade is not customer-installable. The 80A03 must be upgraded at a Tektronix Service Center. To locate the service center near you, please refer to our website at http://www.tek.com/home/contact/ or call 800-833-9200 option 2 for our s
常見問答集 ID64456 30 Dec 2019
What do I do if the 80A03 does not recognize my P7380 probes (the LED stays red)?
If the firmware version (listed on the back of the 80A03) is v1.0, then the 80A03 needs a firmware upgrade. With the latest firmware v2.3, the 80A03 will recognize all P7000-series probes available at the time. The firmware upgrade is not customer-
常見問答集 ID64491 30 Dec 2019
What is the bandwidth of the 80A03?
The bandwidth of the 80A03 is depended on the serial number.  Bandwidth is DC to 12.5GHz for serial numbers up to B020423 and 18GHz typical  for serial numbers B020424 and higher.  These are nominal specification.  The 18GHz units should have decent
常見問答集 ID64496 30 Dec 2019
Is it possible to use the 80E01 and 80E06 electrical sampling modules with the 80A03?
Yes, however there are limitations. Some of them are:The SMA adaptor (2.41/1.85mm t 2.92mm) will need to be used.With the SMA adaptors on the input connector, the provided semi-rigid cable will not fit. A custom cable (not available from Tektronix) i
常見問答集 ID64471 30 Dec 2019
DSA8300 Oscilloscope Firmware for Windows 7 V6.3.1.5
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.3.1.5 Oscilloscope Firmware, Differential Channel Alignment application v1.4.3, TekVisa v4.0.0.84, Clock Recovery application v10.11, and A

零件編號: 066133310
Software 27 Dec 2019
Serial Data Link Analysis Visualizer, DSA8300 JNB02, V2.2.0
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, and cables, allowing visibility of the true circuit behavior.Simulation circuits can be embedded with user

零件編號: 066168400
Software 27 Dec 2019
TekExpress RIN Automated Measurement Solution Software application v1.0.0
TekExpress RIN Automated Measurement Solution Software application v1.0 TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals

零件編號: 066165900
Software 27 Dec 2019
CEI-VSR - OIF CEI 3.1 Compliance Solution for DSA8300, V1.2.0
The Tektronix CEI-VSR is an automated compliance solution for testing OIF CEI 3.1 Compliance Solution, which includes Host to Module (TP1a) and Module to Host (TP4) CEI-VSR - TekExpress CEI-VSR Compliance solution provides 10 free trials by default a

零件編號: 066172600
Software 27 Dec 2019
CEI-VSR - OIF CEI 3.0 Compliance Solution for DSA8300
The Tektronix CEI-VSR is an automated compliance solution for testing OIF CEI 3.0 Compliance Solution, which includes Host to Module (TP1a) and Module to Host (TP4) CEI-VSR - TekExpress CEI-VSR Compliance solution provides 10 free trials by default a

零件編號: 066161501
Software 27 Dec 2019
LabView and LabWindows CVI VXI PnP Driver 8300 V1.0.0.4
LabVIEW/LabWindows CVI VXI Plug&Play driver for use with your DSA8300 sampling oscilloscope. This version supports product application software up through oscilloscope SW V6.0.3.0

零件編號: 066133400
Software 27 Dec 2019
SOLUTIONS FOR SCIENTIFIC AND ENGINEERING RESEARCH

文件編號: 55W_30503_2
小冊子 26 Dec 2019
Sequential-sampling scopes+ TDR challenge VNAs
產品文章 26 Dec 2019
Ultralow drive voltage silicon traveling-wave modulator Paper (Optical Society of America)
Silicon platforms are emerging as a commercial platform for integrated photonics. To integrate directly with on-chip electronics, drive voltages at or below 1 Vpp are desirable.In this paper from the Optical Society of America, the DSA8300 Series Osc

文件編號: Optics Express, Vol. 20, Issue 11, pp. 12014-12020 (2012)
技術簡介 26 Dec 2019
使用相位參考模組 82A04 與 TDS/CSA8200 取樣示波器的超低抖動性能

文件編號: 85W-18385-0
應用摘要 26 Dec 2019
儲存裝置測試解決方案
儲存設備和伺服器產業不斷地推動以最低的成本,達成更快的資料傳輸速度與更大的儲存容量。Tektronix 為各種標準提供強大完善的測試儀器 產品組合,這些標準包括:SATA、SAS、InfiniBand™、Fibre Channel、XAUI 等等。

文件編號: 55C-21407-6
規格摘要表 26 Dec 2019
Tektronix 與 FS2 回覆有關 Altera FPGA 的除錯問題
延遲

文件編號: 85W-19870-1
規格摘要表 26 Dec 2019
在合成眼狀圖上 InfiniBand 夾具串音之效應
使用 Infiniband 設計時,由連接裝置產生的串音可能會導致不準確的眼狀圖表示。在從事  InfiniBand 設計特性分析時,本應用摘要將引導您進行從合成眼狀圖移除夾具串音的程序。

文件編號: 61W-19673-0
應用摘要 26 Dec 2019
Eye Measurements on Optical RZ Signals
This technical brief describes several automatic eye measurements for RZ signals contained in Tektronix' DSA8200 sampling oscilloscope. Examples of real signals are presented, as well as guidelines to ensure valid test results. A method of building m

文件編號: 85W-15764-0
技術簡介 26 Dec 2019
自動回覆相容性挑戰
串列系統設計人員越來越關注互通性與相容性問題。完全自動的相容性解決方案即為解決之道。在關注只有相容性專家知道的細節的同時,他們可以實現一致性制度。利用業界最佳儀器執行量測,確保有精確的結果。自動系統的軟硬體元件能適應不斷出現的標準和不斷變化的相容性規則。

文件編號: 55W-21408-0
規格摘要表 26 Dec 2019
Two good test probes are all you need
技術簡介 26 Dec 2019
Analyzer modules provide complete 40/100-Gbit/s test solution
產品文章 26 Dec 2019
TDR 阻抗量測:訊號完整性的根據基礎
使用 Tektronix 取樣示波器取得穩定和準確的 TDR 結果。在當今的高運作頻率,任何影響訊號上升時間、脈衝寬度、時序、抖動或雜訊內容的因素,都可能影響到系統層級的可靠性。不符及變異的訊號,都可能使整體訊號品質降低。為確認訊號的完整性,需在訊號傳輸環境中瞭解並控制阻抗。

文件編號: 55W-14601-2
規格摘要表 26 Dec 2019
Tektronix Helps Intel Break the 20 Gbps Cable Barrier Resulting in World’s Fastest and Longest Infiniband Cables
Challenge - To help Intel develop and evaluate a new generation of 20 Gbps Infiniband optical cables for scaling out advanced computer clusters to distances of up to 100 metres. Solution - A Tektronix AWG7102 arbitrary waveform generator is used to g

文件編號: 46W 21292 01
個案研究 26 Dec 2019
Tektronix DSA8200 和 DSA8300 取樣示波器之間可程式介面的改變
本文包含更改可程式介面 (PI) 的摘要。關於 GPIB 和 TekVisa 的討論

文件編號: 85W-27063-0.pdf
白皮書 26 Dec 2019
Next-Gen App Performs HDMI Compliance Tests
產品文章 26 Dec 2019
Tektronix Rolls Out HDMI 2.0 Compliance Test and Debug Support
New Test Solution Enables New "4K" Video Monitor Technology for Fast, Consistent and Accurate ResultsBEAVERTON, Ore., June 10, 2014 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced that a new Method of Implementat
新聞稿 26 Dec 2019
Tektronix unveils fastest scope probe yet
產品文章 26 Dec 2019
TDR 和 S 參數量測 - 您需要多少效能?
在本文中,您將瞭解串列資料網路分析除錯、相容性、驗證和特性分析等應用的準確度要求。此外,您將瞭解TDR 式量測工具如何提供較傳統 VNA 更快速的方式,來進行 S 參數量測。

文件編號: 85W-19888-0
應用摘要 26 Dec 2019
PCB 品質驗證串音量測的時域法應用摘要
本應用手冊將討論串音的元素,並展示如何使用 TDS8200 系列取樣示波器或 CSA8200 系列通訊訊號分析儀,在單層 PCB 上量測串音。

文件編號: 85W-16643-0
應用摘要 26 Dec 2019
Test methodologies for high-speed serial designs
產品文章 26 Dec 2019
Tests Show That Optical Infiniband Cable Performance Exceeds Copper
技術簡介 26 Dec 2019
100 Gb/s通訊系統實體層測試
本應用指南涵蓋了裝配100G系統必需的發射器和接收器測試。由於每種25+ Gb/s HSS技術均有共同的主題,因此我們將檢視100 GbE 相容性測試要求,同時指出其他高速系統 (如光纖通道的32GFEC) 之間的差異。在100 GbE規格存在空白時,如在25-28 Gb/s介面發訊中,我們將採用光學互通論壇公共電介面實行通訊協定 (OIF-CEI)。

文件編號: 65W-28494-1
應用摘要 26 Dec 2019
Practices for Measurements on 25 Gb/s Signaling
This application note describes the measurement practices for the characterization and compliance test of the transmitter and receiver for 25+ Gb/s signaling in 100 G systems. Focus is on oscilloscope measurements, with some comments on BERTs.

文件編號: 86W-29118-1
應用摘要 26 Dec 2019
PAM4 Signaling in High Speed Serial Technology: Test, Analysis, and Debug
Learn valuable information on testing PAM4 technology and approaches for validating PAM4 signals.  This application note describes: PAM4 technology for 50-400G applications Provides details of PAM4 signaling Outlines important aspects of evaluatin

文件編號: 55W-60273-2
應用摘要 26 Dec 2019
Performing RIN and RIN OMA Measurements on the DSA8300 Sampling Oscilloscope
Detailed information on the measurement of the RIN OMA for the purpose of 10 Gb/s Ethernet, IEEE 802.3ae and similar specifications is presented, using a Tektronix DSA8300 Sampling Oscilloscope.

文件編號: 85W-30657-0
應用摘要 26 Dec 2019
HDMI/DVI 實作方法 (MOI)
本文件是使用 Tektronix TDS/DSA8200 和取樣模組 80E04 的 HDMI 接收器儀器差動式阻抗量測的程序指南。
實作方法 26 Dec 2019
接收器測試解決方案應用規格摘要表
接收器測試是需要練習和分析新興設備特性的設計人員所面臨的最大挑戰之一。此規格摘要表提供了 Tektronix 接收器測試解決方案。

文件編號: 76W-21670-2
規格摘要表 26 Dec 2019
10-Gb/s 系統的高可靠性測試 (STM-64/OC-192)
滿足日益成長的頻寬需求Internet、電子商務、虛擬專用網、IP 電話和其他以資料為中心的應用的發展,正不斷促使增加頻寬的需求。為了跟上發展的步伐,網路供應商正被迫從 2.5 Gb/s 快速移動到 10 Gb/s 的系統部署。隨著此技術的組件價格不斷下降,以及 10 Gb/s 技術可靠性增加,這樣的趨勢只會繼續強化。從 2.5 Gb/s 移動到 10 Gb/s 的系統涉及許多新因素,使過渡成為極為困難的挑戰。配置 80C02 或 80C04 光介面取樣模組的 CSA8000 通訊訊號分析儀為

文件編號: 85W-13595-0
應用摘要 26 Dec 2019
高速互連:特性分析與量測式模型製作
當現代訊號標準將數位設計推向 GHz 和 GB 範圍時,互連效能成為啟用可靠系統操作的重要因素。此入門手冊除帶領您瞭解挑戰和解決方案,以取得互連連結各部分以精確量測為基礎的互連模型外;還有 It will take you through the theory of時域和頻域量測的理論,和以最有效結果的 TDR/T 量測為基礎之系統效能模型。

文件編號: 85W-19887-0
初階 26 Dec 2019
System Extends InfiniBand Cable Reach To 100 m
產品文章 26 Dec 2019
Remote Head Acquisition Improves High Speed Serial Measurement
As high speed serial data rates continue to increase, the need to maximize margin in measurements increases. Coaxial cables, even good quality ones can impact the measurement margin. Remote heads for oscilloscopes provide clear advantages that maximi

文件編號: 55W-29580-0
應用摘要 26 Dec 2019
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences

文件編號: 46W-31080-7
選購指南 26 Dec 2019
Semtech Turns to Tektronix DSA8300 Sampling Scope to Characterize New 25-28 Gb/s CDR Devices
This customer case study illustrates the benefits that Tektronix DataCom test solutions deliver to characterize electrical performance of 100G technologies with the industry’s lowest intrinsic noise floor.     

文件編號: 85W-60024-0
個案研究 26 Dec 2019
Fast probe enhances advanced four-channel oscilloscopes
產品文章 26 Dec 2019
利用 FrameScanTM™ 擷取技術尋找和檢查碼型相關的故障
隨著位元速率提高到 10 Gbps  (和以上),在各種資料和通訊產品及系統的產生、傳輸及接收訊號中碼型相關的故障將變得更常見。不幸的是,傳統的測試技術已經難以可靠地識別並觀察這些故障,而且極為耗時。利用 DSA8200 取樣示波器中的 FrameScanTM™ 擷取技術,您便能快速、可靠地找出和研究這些碼型相關的故障。本示波器支援自動擷取連續的各個位元  (如果需要,則是完整的資料框架),可協助發現導致錯誤行為的位元序列。

文件編號: 85W-13561-2
應用摘要 26 Dec 2019
使用參考接收器的 10 GB 乙太網路雷射發射器測試中的變化
參考接收器  (RR) 是電信/資料通訊原始設備製造商、系統安裝商和系統服務商使用的關鍵工具之一,可在示波器上查看眼狀圖和測試雷射的時域訊號品質。本應用摘要將針對 Tektronix 所提供的兩種不同類型時域光學取樣系統與參考接收器過濾功能,並透過一系列量測實例,說明在 10GbE 雷射發射器測試中使用這些系統的方式和時間,以及討論所產生的量測結果。

文件編號: 85W-16691-1
應用摘要 26 Dec 2019
深入瞭解示波器
閱讀本入門手冊之後,您將能夠:描述示波器的工作方式描述各種示波器之間的差異描述電氣波形類型,瞭解基本示波器控制功能進行簡單的量測

文件編號: 03Z-8605-7
初階 26 Dec 2019
Tektronix USB 測試解決方案 (簡中)
Tektronix 為電氣驗證與相容性測試、訊號路徑特性分析、數位驗證與除錯提供了 USB 解決方案,包括 MSO/DPO4000、MSO4000、DPO4000。

文件編號: 55C-17700-6
規格摘要表 26 Dec 2019
Case Study: Freescale Semiconductor Uses Tektronix IConnect®
ChallengeFreescale Semiconductor establishes a new approach to the usual methodology adopted in modeling a Transmitter. The transmitter was modeled using only one port (TDR) and assuming lossless Package and Board Transmission line.SolutionUnlike the

文件編號: 85W-25199-0
技術簡介 26 Dec 2019
消光比 (ER) 校驗白皮書
本白皮書介紹了一些高準確度 ER 量測的好處,不論是在 10 GbE (乙太網路),利用其相對較低的 ER 要求;還是在 SONET/SDH,支援一致、準確的 ER 結果的方法。

文件編號: 85W-25115-1
白皮書 26 Dec 2019
使用 80SJNB 先進軟體進行等化及串列資料連結分析 (SDLA) 方法應用摘要
本應用摘要說明易損耗/分散通道上執行的串列資料標準,所使用的測試與量測方法,這類通道使接收器的眼圖閉合,通道中使用等化 (FFE/DFE) 方法來打開眼圖。本應用摘要比較了接收器上進行的量測、示範發射器進行的建議量測,並介紹其他串列資料設計人員與測試設計人員感興趣的 SDLA 概念。

文件編號: 61W-21428-1
應用摘要 26 Dec 2019
Choose the Right Platform for Your Jitter Measurements
This document will explain some essential jitter terms, and then go on to discuss jitter measurements and the tools best suited for evaluating and quantifying jitter, when working with serial data communication architectures.

文件編號: 37W-19858-2
技術簡介 26 Dec 2019
FB-DIMM 一致性和故障排除解决方案
不断增长的FB-DIMM 需求对设计者提出新的挑战

文件編號: 55C-18686-0
規格摘要表 26 Dec 2019
Tektronix 抖動量測2.0 版解決方案
抖動特性分析包含複雜的訊號分析,量測需求範圍從簡單到複雜、發送器之間的互通性,以及完整串列資料連結分析所需的通道結果。不管您的特定需求是什麼,Tektronix 都有辦法能夠快速有效地解決您設計上的挑戰。創新的量測解決方案,例如數位化示波器、邏輯分析儀、即時頻譜分析儀、時域反射儀、訊號產生器、高傳真探棒和分析軟體的出現,協助您解決抖動的問題。

文件編號: 55T-17692-3
規格摘要表 26 Dec 2019
80X01 and 80X02
Electrical Sampling Module Extender Instructions

零件編號: 071320600
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer, 80C00/80E00/80AXX modules
Specifications Technical Reference

零件編號: 077057101
Manual 25 Dec 2019
DSA8300
Digital Serial Analyzer Microsoft Windows 7 Operating System Restore Instructions

零件編號: 071289900
Manual 25 Dec 2019
DSA8300
Printable Online Help Online Help

零件編號: 077056902
Manual 25 Dec 2019
DSA8300
Specifications Technical Reference

零件編號: 077057100
Manual 25 Dec 2019
DSA8300 快速入門使用者手冊
數位串列分析儀 Quick Start User Manual

零件編號: 071295105
Manual 25 Dec 2019
DSA8300 CEI-VSR
Application software instructions, printed Online Help

零件編號: 077087200
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer
TekScope and Connectivity Software Installation Manual

零件編號: 071289802
Manual 25 Dec 2019
DSA8300
Instrument software restore instructions Read This First

零件編號: 071316200
Manual 25 Dec 2019
DSA8300, CSA/DSA/TDS8000 Series
Differential Channel Alignment Application Online Help

零件編號: 077077500
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer, 80C00/80E00/80A00 modules
Specifications Technical Reference

零件編號: 077057102
Manual 25 Dec 2019
DSA8300 快速入門使用者手冊
數位串列分析儀 Quick Start User Manual

零件編號: 071295102
Manual 25 Dec 2019
DSA8300 Series
Digital Serial Analyzer Quick Start User Manual

零件編號: 071289700
Manual 25 Dec 2019
DSA8300 Series
Digital Serial Analyzer Quick Start User Manual

零件編號: 071289700
Manual 25 Dec 2019
DSA8300
Digital Serial Analyzer and Modules Service Manual

零件編號: 077057201
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer
TekScope and Connectivity Software Installation Manual

零件編號: 071289804
Manual 25 Dec 2019
DSA8300
Performance Verification Technical Reference

零件編號: 077068200
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer
Practices for Measurements on 25 Gb/s Signaling Application Note Other

零件編號: 071320701
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer
TekScope and Connectivity Software Installation Manual

零件編號: 071289803
Manual 25 Dec 2019
DSA8300
Printable Application Help Online Help

零件編號: 077056903
Manual 25 Dec 2019
DSA8300
Printable Online Help Online Help

零件編號: 077056901
Manual 25 Dec 2019
DSA8300 Series, Rev A
Digial Serial Analyzer Declassification and Security Instructions

零件編號: 077057600
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer and Modules
Sampling Oscilloscope Service Manual

零件編號: 077057200
Manual 25 Dec 2019
DSA8300 and Sampling Modules
Performance Verification Technical Reference

零件編號: 077068201
Manual 25 Dec 2019
DSA8300
Digital Serial Analyzer Programmer Manual

零件編號: 077057003
Manual 25 Dec 2019
DSA8300 and Sampling Modules
Performance Verification Technical Reference

零件編號: 077068202
Manual 25 Dec 2019
DSA83UP
Upgrades for DSA8300 Instrument Instructions

零件編號: 075103702
Manual 25 Dec 2019
DSA8300 快速入門使用者手冊
數位串列分析儀 Quick Start User Manual

零件編號: 071295104
Manual 25 Dec 2019
DSA8300 and 80A00, 80C00, 80E00 Sampling Modules
Performance Verification Technical Reference

零件編號: 077068203
Manual 25 Dec 2019
DSA83UP
Upgrades for DSA8300 Instrument Instructions

零件編號: 075103701
Manual 25 Dec 2019
DSA8300 and 80A00, 80C00, 80E00, 80N01, 80X00, 82A00 Sampling Modules
Declassification and Security Instructions

零件編號: 077057602
Manual 25 Dec 2019
DSA8300 Series
Digital Serial Analyzer Quick Start User Manual

零件編號: 071289703
Manual 25 Dec 2019
DSA8300
Digital Serial Analyzer Programmer Manual

零件編號: 077057001
Manual 25 Dec 2019
DSA8300
Digital Serial Analyzer Programmer Manual

零件編號: 077057002
Manual 25 Dec 2019
DSA8300 快速入門使用者手冊
數位串列分析儀 Quick Start User Manual

零件編號: 071295101
Manual 25 Dec 2019
80A00, 80C00, 80E00, and 82A00 Series
Sampling Modules Read This First

零件編號: 071138611
Manual 25 Dec 2019
80A00 and 82A00 Series
Sampling Modules Read This First

零件編號: 071138613
Manual 25 Dec 2019
80A00, 80C00, 80E00, and 82A00 Series
Sampling Modules Read This First

零件編號: 071138610
Manual 25 Dec 2019
80A00, 80C00, 80E00, and 82A00 Series
Electrical and Optical Sampling Modules Read This First

零件編號: 071138612
Manual 25 Dec 2019
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Printable Online Help Online Help

零件編號: 077064101
Manual 25 Dec 2019
DSA8300 Digital Serial Analyzer, 80C00/80E00/80A00 modules
Specifications

零件編號: 077057105
Manual 26 Nov 2019
DSA8300 and 80A00, 80C00, 80E00 Sampling Modules
Performance Verification

零件編號: 077068205
Manual 26 Nov 2019
80SJNB

零件編號: 077064102
Manual 26 Nov 2019
DSA83UP
Upgrades for DSA8300 Instrument

零件編號: 075103703
Manual 26 Nov 2019
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Printable Online Help Online Help

零件編號: 077064103
Manual 26 Nov 2019
DSA8300
Printable Application Help

零件編號: 077056904
Manual 26 Nov 2019
DSA8300
Digital Serial Analyzer

零件編號: 077057006
Manual 26 Nov 2019
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Help file (PDF) Online Help

零件編號: 077064104
Manual 26 Nov 2019
DSA8300 and 80A00, 80C00, 80E00, 80N01, 80X00, 82A00 Sampling Modules
Declassification and Security

零件編號: 077057604
Manual 26 Nov 2019
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Help file (PDF)

零件編號: 077064105
Manual 26 Nov 2019
Optical Bandwidth Requirements for NRZ and PAM4 Signaling
Until recently, both optical and electrical bandwidths produced similar results but this is no longer the case with the recent IEEE spec change. This paper clarifies these terms, mathematically shows how they are related, and provides the basis to un

文件編號: 55W-61363-0
白皮書 26 Nov 2019
NRZ-M4 Optical Manufacturing TDEC Analysis Software for Tektronix DSA8300 - V1.1.0.37
Tektronix NRZ-M4 is a PC based application which offers optical NRZ signaling analysis, including TDEC(Transmitter and Dispersion Eye Closure) measurement. The application brings together NRZ optical measurements in a simple and easy to use applicati

零件編號: 066199900
Software 12 Nov 2019
TekExpress RIN Automated Measurement Solution Software Application, V1.0.1
TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals. -RIN and RINxOMA measurements can be performed on PRBS7, PRBS9,PRBS11,

零件編號: 066181600
Software 12 Nov 2019
80SJNB, 80SJARB and SDLA Visualizer Application Software Release - V4.2.6.0 - V4.0.4.0 - V2.2.0.4
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds a TDECQ option in support of 100 – 400 Gbps, PAM4 signal analysis, with focus on the TDECQ (Transmitter and Di

零件編號: 066134709
Software 12 Nov 2019
80SJNB JITTER, NOISE, and BER ANALYSIS V4.0.8.0, 80SJARB V4.0.2.0, and SDLA Visualizer 2.2.0
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System.The purpose of this new versions, V4.0.8.0, of 80SJNB, Jitter, Noise, BER and Serial Data Link Analysis software is to enhance the capabiliti

零件編號: 066134707
Software 12 Nov 2019
100GBASE-SR4 and TDEC Measurement Solution for DSA8300, V1.0.1
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach Ethernet Specifications outlined in IEEE 802.3bm. TekExpress 100GBASE-SR4 / TDEC solu

零件編號: 066179401
Software 12 Nov 2019
100G-TXE - IEEE-802.3bj:CR4/KR4 and IEEE-802.3bm:CAUI4 Transmitter Compliance Solution for DSA8300 - V1.0.0
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE. - TekExpress 100G-TXE Compliance solution provides 10 free trials by default and need

零件編號: 066190500
Software 12 Nov 2019
DSA8300 Oscilloscope Firmware for Windows 7 - V6.6.1.1
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.6.1.1 Oscilloscope Firmware, Differential Channel Alignment application v1.6.2.0, TekVisa v4.0.0.84, and Clock Recovery application v10.11.

零件編號: 066133313
Software 12 Nov 2019
100GBASE-SR4 and TDEC Measurement Solution for DSA8300, V1.0.0
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach Ethernet Specifications outlined in IEEE 802.3bm. TekExpress 100GBASE-SR4 / TDEC so

零件編號: 066179400
Software 12 Nov 2019
DSA8300 Oscilloscope Firmware for Windows 7 V6.4.1.1
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.4.1.1 Oscilloscope Firmware, Differential Channel Alignment application v1.4.3, TekVisa v4.0.0.84, and Clock Recovery application v10.11. Th

零件編號: 066133311
Software 12 Nov 2019
80SJNB, 80SJARB and SDLA Visualizer Application Software Release V4.1.31.0, V4.0.2.0 and V2.2.0.4
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System. The purpose of this new versions, V4.1.31.0, of 80SJNB, Jitter, Noise, BER and Serial Data Link Analysis software is to enhance the capabi

零件編號: 066134708
Software 12 Nov 2019
100G-TXE - IEEE-802.3bj:CR4/KR4 and IEEE-802.3bm:CAUI4 Transmitter Compliance Solution for DSA8300 - V1.0.1.96
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.

零件編號: 066190501
Software 12 Nov 2019
100GBASE-SR4 and TDEC Measurement Solution for DSA8300 - V1.1.2
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach EthernetSpecifications outlined in IEEE 802.3bm.

零件編號: 066179403
Software 12 Nov 2019
DSA8300 Oscilloscope Firmware for Windows 7 - V6.5.1.1
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.5.1.1 Oscilloscope Firmware, Differential Channel Alignment application v1.4.3, TekVisa v4.0.0.84, and Clock Recovery application v10.11. Th

零件編號: 066133312
Software 12 Nov 2019
400G-TXO support IEEE 802.3bs and 802.3cd: 50GBASE-FR/LR, 100GBASE-DR, 200GBASE-DR4/ LR4/FR4 and 400GBASE-LR8/FR8/DR4 Optical Conformance and Characterization Solution for DSA8300 – V 1.0.0
The 400G-TXO application package is an automated conformance and characterization solution for IEEE 802.3bs and IEEE 802.3cd specifications. This package operates on DSA8300 sampling instrument with 80C10C optical module. The 80S400G-TXO offers a s

零件編號: 066191900
Software 12 Nov 2019
80SJNB, 80SJARB, SDLA Visualizer and Scope Noise Characterization Application Software Release - V4.5.9.0, V4.0.4.0, V2.2.0.4, V 1.0.0.64
80SJNB, 80SJARB, SDLA Visualizer, and Scope Noise Characterization software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds updates to TDECQ measurements in support of 100 to 400 Gbps, PAM4 signal analysis,

零件編號: 066134713
Software 12 Nov 2019
80SJNB, 80SJARB and SDLA Visualizer Application Software Release - v4.3.2.0 and v4.0.4.0 and V2.2.0.4
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds a TDECQ option in support of 100 – 400 Gbps, PAM4 signal analysis, with focus on the TDECQ (Transmitter and Disp

零件編號: 066134710
Software 12 Nov 2019
TekExpress RIN Automated Measurement Solution Software Application - V1.1.2
TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals.-RIN and RINxOMA measurements can be performed on PRBS7, PRBS9,PRBS11, P

零件編號: 066181602
Software 12 Nov 2019
CEI-VSR - OIF CEI 3.1 Compliance Solution for DSA8300 - V1.3.1.160
The Tektronix CEI-VSR is an automated compliance solution for testing OIF CEI 3.1 Compliance Solution, which includes Host to Module (TP1a) and Module to Host (TP4)CEI-VSR

零件編號: 066172601
Software 12 Nov 2019
400G-TXO support IEEE 802.3bs and 802.3cd: 50GBASE-FR/LR, 100GBASE-DR, 200GBASE-DR4/ LR4/FR4 and 400GBASE-LR8/FR8/DR4 Optical Conformance and Characterization Solution for DSA8300 V 1.0.2
The 400G-TXO application package is an automated conformance and characterization solution for IEEE 802.3bs and IEEE 802.3cd specifications. This package operates on DSA8300 sampling instrument with 80C10C optical module. The 80S400G-TXO offers a sel

零件編號: 066191901
Software 12 Nov 2019
400G-M4 PAM4 Optical Manufacturing TDECQ Analysis Software for Tektronix DSA8300 - V1.1.0.12
PC based analysis software package provides up to 4 channel support enabling higher throughput rates through parallel channel acquisition and processing. Features in the DSA8300 400G-M4 Analysis include:? Support for 4 channel simultaneous acquisitio

零件編號: 066134770
Software 12 Nov 2019
Tektronix Introduces Optical Modules with Industry’s Highest Sensitivity, Lowest Noise
New Modules for DSA83000 Sampling Oscilloscope Increases Production Yields for 100G Designs; Tektronix adds comprehensive 400G PAM4 TDECQ Measurement_____BEAVERTON, Ore. March 21, 2017 - Tektronix, Inc., a leading worldwide provider of measurement so
新聞稿 12 Nov 2019