6 Series Low Profile Digitizer
6 Series Low Profile Digitizer
Applications requiring high-speed digitizers shouldn’t trade-off performance when turning on channels. The 6 Series Low Profile Digitizer sets a new standard by not interleaving sample rate, bandwidth or record length. You get the fastest and most accurate performance from your digitizer – all in a 2U space.
- 25 GS/s on all 4 channels
- DC to 8 GHz on all 4 channels
- 12-bit analog-to-digital converters
- Up to 250 Million samples on all 4 channels
- Up to 2 GHz RF DDC bandwidth on all channels
- 2U rack ready digitizer
- Best in class low noise and ENOB
Big Physics – Machine Diagnostics
Physics is constantly leading the world to exciting new scientific discoveries in both matter and energy. These experiments require digitizers and oscilloscopes with new levels of precision, performance and size when monitoring target test points. The 6 Series Low Profile Digitizer exceed these by bringing an award winning oscilloscope user interface, industry leading performance, small form factor and Tektronix’s class of reliability. Test equipment just got better.
- High Energy (Particle) Physics
- Nuclear Physics
- Atomic, Molecular and Optical Physics
- Condensed Matter
Built-in Spectrum View inputs with DDC & IQ data offload
Whether you’re a spectrum analyzer expert or an occasional user, you’ll be able to put the built-in Spectrum View right to work. The Tektronix TEK049 ASIC has patented dual signal paths with an ADC and DDC that allow independent controls of both time domain and frequency domain.
- Up to 2 GHz bandwidth with Digital Down Converter (DDC)
- Individual time domain and frequency domain controls
- Frequency versus time, Phase versus time analysis and Magnitude versus time
High bandwidth Manufacturing such as 5G and UWB
Higher data throughput is driving multiple technologies such as 5G mmWave, ultra wide band, WiGig and automotive RADAR. The 6 Series Low Profile is an ideal IF digitizer for multichannel systems and packs 4 high performace 25 GS/s channels into a 2U rack. By using the DDC, there's up to 30% reduction in data sizes, which means you get your data faster for post-processing.
- 2 rack units high (3.5 inches) with rackmount attached
- Easy Remote Control – browser access and control
- Ethernet and USB 3.0 ports for fast data transfer
- Programming support: IVI-C, IVI-COM, MATLAB, LabView, Python, VISA, Sockets, and more
Transition from design to manufacturing test, effortlessly
Eliminate work by using exactly the same software and test routines in production that you developed during design. Use the benchtop 6 Series MSO with its 15.6-inch HD display and pinch-swipe-zoom touchscreen for design validation. Run the same user interface, similar hardware while using the compact low-profile digitizer version in manufacturing.
6 Series Low Profile Digitizer
5 Series MSO Low Profile
WaveRunner 8000-R Low Profile
|Bandwidth (on all channels)||1 GHz to 8 GHz||1 GHz||1 GHz to 4 GHz||2.5 GHz (typical)||2.5 GHz (5186)
1.5 GHz (5185)
|6.5 GHz (ADP7104)
4 GHz (ADP7084)
|Analog Sample Rate (on all channels)||25GS/s||6.25GS/s||10GS/s @ 1GHz
|5GS/s||6.25GS/s||16 GS/s (ADP7104)
|RF Input - DDC Bandwidth (Span)||2 GHz||500 MHz||-||-||-||2.5GHz|
|ADC Resolution||12 bits||12 bits||8 bits||10 bits||10 bits||10 bits|
|ENOB||8.2 bits at 1 GHz
7.6 bits at 2.5 GHz
7.25 bits at 4 GHz
6.8 bits at 6 GHz
6.5 bits at 8 GHz
|7.6 bits bits at 1 GHz||-||7.2 bits at 924 MHz||6.3 bits at 1 GHz
6.0 bits at 2.5 GHz
5.5 bits at 5 GHz
|7.9 bits at 1 GHz
7.5 bits at 2.5 GHz
6.9 bits at 4 GHz
6.7 bits at 6 GHz
6.5 bits at 8 GHz
|Standard Record Length (on all channels)||125 Mpts||125 Mpts||64Mpts or 16Mpts @1GHz||100MS/ch||4 Kpts||-|
|Optional Record Length (on all channels)||250 Mpts||-||-||1.6 GS/ch||100 Kpts||-|
|Programmable Interface||Python, Visa, IVI, Sockets, LXI, MATLAB, LabView||Python, Visa, IVI, Sockets, MATLAB, LabView||Python, Visa, IVI, Sockets, LXI, MATLAB, LabVIEW||Visa, IVI, C/C++/C#, MATLAB, LabView||LabView||PI, IVI, LabView|
|Easy Remote Control via IP address||Yes from Browser||Yes from Browser||WaveStudio||No||No||No|
|Field Upgradable Bandwidth||Yes||No||No||No||No||No|
|Height (Rack Units)||2U||2U||2U||2U - AXI Chassis required||3U - PXI Chassis required||2U - AXI Chassis required|
|Operating System||Closed Embedded Linux||Closed Embedded Linux||Windows||Windows & Linux||Windows||Windows & Linux|
|Oscilloscope & Digitizer Matched Performance||6 Series MSO||5 Series MSO||WaveRunner 8000||-||-||-|
|Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes|
Spectrum View is a new way of performing spectrum analysis on an oscilloscope. This application note shows and explains how Spectrum View operates and how it differs from traditional oscilloscope FFT functions.
|Application Note||13 Sep 2019|
|4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.20.x.
|TEKVISA Connectivity Software - V4.2.0|
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various…
|6 Series Low Profile Digitizer (LPD64) With Factory Option 6-SEC Enhanced Security Instrument Declassification and Security
…This document helps customers with data security concerns to clear or sanitize a Tektronix 6 Series Low Profile Digitizer (LPD64) instrument with factory installed option 6-SEC.
|6 Series Low Profile Digitizer|
LPD64 Datasheet With the lowest input noise and up to 8 GHz analog bandwidth, the 6 Series Low Profile Digitizer LPD64 provides the best signal fidelity for analyzing and debugging signals in a compact 2U rack space. With four SMA inputs each supporting Analog, Spectral…
|4/5/6 Series MSO MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help
This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.20.x.
|5 Series Low Profile Oscilloscope, 6 Series Low Profile Digitizer MSO58LP, LPD64 Bench Conversion Kit
This kit is a collection of parts that, once installed, configures the MSO58LP or LPD64 from a rack mount instrument to a stackable benchtop instrument.
|Field Install Instructions|
|6 Series Low Profile Digitizer LPD64 Installation and Safety
This manual describes installing and setting up the 6 Series Low Profile Digitizer (LPD64), and introduces basic oscilloscope operations.
|How do I set up a network drive on my 5 Series MSO or 6 Series MSO?|
Introduction Network drives were introduced in firmware version 1.8.7 for 5 Series, 5 Series Low Profile, and 6 Series MSOs. This feature allows you to specify a directory on another computer for the scope to use as storage. To access this storage, or…
|常見問答集ID: 773296||17 Jul 2019|
|How do I activate the free DVM for my scope?|
After you have registered your oscilloscope on Tek.com, you should have received an email with instructions. The email is sent to the address you used to login to tek.com. If you haven't received the email after registration: Check your spam folder…
|常見問答集ID: 468046||17 Jul 2019|
|5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64) Programmer Manual
This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.14.
|Tek049 ASIC Powers Next-Generation Oscilloscopes|
The Tek049 ASIC is the powerhouse behind Tek’s new 5 Series MSO, and it will power next-generation oscilloscopes. This paper examines some of the technology and innovations in this new mixed-signal ASIC.
|Whitepaper||15 Jul 2019|