下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

5 系列 MSO 混合訊號示波器

搭配優異且創新的滑動、縮放、觸控式螢幕使用者介面、業界最大的高解析度螢幕顯示器,以及 4、6 或 8 個可讓您量測一個類比或八個數位訊號的 FlexChannel™ 輸入通道,5 系列 MSO 已準備好迎接當下及未來最嚴竣的挑戰。 它確立了效能、分析和整體使用者經驗的新標準。

基本價格
US $14,500 - US $24,300
購買/報價 有任何問題嗎?立即開始聊天
頻寬

最高 2 GHz

記錄長度

最高 125 M 點

類比通道

468

數位通道

最多 64

不只是新的螢幕顯示器和使用者介面。 更是一種新標準。

利用 15.6 HD 觸控式螢幕顯示器獲得大圖形和全面掌控。使用電容式捏合縮放滑動觸控式螢幕、前面板控制項或滑鼠來分析和管理多個訊號,無需透過功能表進行操作。

通道數綽綽有餘

可與 4、6 或 8 個 FlexChannel 輸入通道搭配。每一個都可用來查看 1 個類比訊號,或查看 8 個數位邏輯訊號,僅需變更探棒即可。將任何類比訊號顯示為高解析度波形、頻譜或兩者同時顯示,並為每個網域提供獨立的擷取控制。

查看獎項

最高 16 位元的垂直解析度,因此不會遺漏任何細節。

Thumbnail

12 位元類比至數位轉換器使用進階的數位訊號處理,提供最高 16 位元的垂直解析度。 看到並量測微小訊號細節,即使它們藏身在大訊號內。

立即購買所需產品。 因應您的測試需求改變而擴充。

Thumbnail

效能

  • 頻寬最高 2 GHz
  • 記錄長度最高 125 M 點

數位輸入

  • TLP058 邏輯探棒,每組提供 8 個數位通道

作業系統

  • 新增 Windows OS 以在示波器上執行 PC 軟體

訊號產生

  • 新增一個內建任意/函數產生器

進階分析

  • 關鍵匯流排 (如 I2C、SPI、USB 2.0、乙太網路、CAN、LIN、許多其他匯流排) 的串列解碼/觸發支援
  • 適用於乙太網路、USB 2.0 和汽車乙太網路的自動相容性測試
  • 進階抖動分析
  • 自動電源量測和分析

新功能和新選項讓最佳示波器更勝一籌

新選項

具進階分析選項的儀器免費升級

所有儀器均享免費升級

  • 頻譜檢視 - 每個類比通道的頻域顯示,具有獨立時間和頻域控制
  • 固定/可移動方格圖的使用者偏好
  • 使用者可選擇的波形顏色

已有 5 系列嗎?立即取得更新

下載新版本的韌體

包裝盒中有什麼?

上圖顯示 8 通道 MSO58 機型
  • 每一輸入通道隨附一支被動式探棒:
    • 選擇 350 或 500 MHz 頻寬選項為 TPP0500B (500 MHz)
    • 選擇 1 或 2 GHz 頻寬選項為 TPP1000 (1 GHz)
  • 內含探棒的 1 年期保固
  • 儀器的 3 年期保固
  • 滑鼠、電源線和附有配件包的前外蓋
  • 紙本安裝手冊,說明安全注意事項和基本作業
  • 完整的整合式線上說明
  • 可追溯證書

意外經常發生。 請確保您有周全的保護。

We have the only plan in the industry to offer coverage for accidental damage. Yes, this includes screen damage, spills, broken mounts, and electrostatic discharge or electronic overstress events. Reduce unplanned repair or replacement costs with our Total Protection Plan. Watch the video or click below to learn more.

深入瞭解

機型 類比頻寬 取樣率 記錄長度 類比通道 數位通道 函數產生器輸出 參考價格
MSO54 350 MHz - 2 GHz 6.25 GS/s 62.5 M 點 - 125 M 點 4 最高 32 個 (選配)

1 個 (選配)

US $14,500
配置和報價
MSO56 350 MHz - 2 GHz 6.25 GS/s 62.5 M 點 - 125 M 點 6 最高 48 個 (選配)

1 個 (選配)

US $18,100
配置和報價
MSO58 350 MHz - 2 GHz 6.25 GS/s 62.5 M 點 - 125 M 點 8 最高 64 個 (選配)

1 個 (選配)

US $24,300
配置和報價
機型 類比頻寬 取樣率 記錄長度 類比通道 數位通道 函數產生器輸出 參考價格
MSO54 350 MHz - 2 GHz 6.25 GS/s 62.5 M 點 - 125 M 點 4 最高 32 個 (選配)

1 個 (選配)

US $14,500
配置和報價
MSO56 350 MHz - 2 GHz 6.25 GS/s 62.5 M 點 - 125 M 點 6 最高 48 個 (選配)

1 個 (選配)

US $18,100
配置和報價
MSO58 350 MHz - 2 GHz 6.25 GS/s 62.5 M 點 - 125 M 點 8 最高 64 個 (選配)

1 個 (選配)

US $24,300
配置和報價
  Tektronix
5 系列 MSO
Tektronix
MSO/DPO5000B
Keysight
S 系列
LeCroy
HDO6000A/HDO8000A
Rohde & Schwarz
RTO2000
Yokogawa
DLM4000 Series
詳細比較 -- -- 規格摘要表 規格摘要表 規格摘要表 規格摘要表
頻寬 350 MHz 至 2 GHz 350 MHz 至 2 GHz 500 MHz 至 8 GHz 350 MHz 至 1 GHz 600 MHz 至 6 GHz 350 MHz、500 MHz
可升級頻寬
類比通道 4、6 或 8 4 2 或 4 4 或 8 2 或 4 8
類比取樣率 (所有通道) 最高 6.25 GS/s 最高 5 GS/s 最高 10 GS/s 最高 2.5 GS/s 最高 10 GS/s 2.5 GS/s
標準記錄長度 (所有通道) 62.5 M 25 M 50 M 50 M 50 M 25 M
整合式任意/函數產生器 50 MHz (選配) -- -- -- 100 MHz (選配) --
數位通道 (MSO) 最高 64 個 (選配) 16 個 (選配) 16 個 (選配) 16 個 (選配) 16 個 (選配) 8 (標準)/24 (選配)
ADC 解析度 12 位元 8 位元 10 位元 12 位元 8 位元 8 位元
波形擷取率 >500,000 個波形/秒 250,000 個波形/秒 <1,100 個波形/秒 <700 個波形/秒 1,000,000 個波形/秒 N/A
作業系統 Closed Linux
Open Windows (選配)
Open Windows Open Windows Open Windows Open Windows 已關閉
標準探棒 最高 1 GHz 被動探棒
< 3.9 pF Loading
最高 1 GHz 被動探棒
< 3.9 pF Loading
500 MHz 被動探棒
9.5 pF 負載
500 MHz 被動探棒
10 pF 負載
500 MHz 被動探棒
10 pF 負載
500 MHz
10.5 pF 負載
標準保固 3 年 1 年 3 年 3 年 3 年 ?

嵌入式串列匯流排分析

Thumbnail

自動串列匯流排解碼與手動解碼相比,更能節省時間和排除錯誤。 串列匯流排觸發和搜尋可讓您隔離事件,以進行系統層級的疑難排解。

特性

  • I2C、SPI
  • I3C
  • USB 2.0
  • 乙太網路
  • SPMI
  • CAN、CAN FD、LIN、FlexRay
  • SENT
  • I2S/LJ/RJ/TDM
  • ARINC 429、MIL-STD-1553

汽車串列匯流排分析

Thumbnail

汽車設計師依賴串列匯流排,在 ECU、感應器與驅動器之間進行無錯誤通訊。 他們也能依賴配備 CAN、CAN FD、LIN、FlexRay 和 SENT 解碼與觸發的 5 系列 MSO,而能夠取得其系統的同步視圖。 自動汽車乙太網路相容性套件可讓您無需成為高速匯流排專家也能針對標準進行測試。

抖動分析

Thumbnail

時脈位於每一個嵌入式系統與數位通訊連結的核心。 抖動和其他時脈失真可能會影響系統作業,且若無正確的分析工具,則難以發現問題根源。

特性

  • 標準相位雜訊、TIE,以及頻率圖和分佈圖
  • 可選的進階分析 (具有抖動分解和時脈還原)

電力電子裝置

Thumbnail

透過自動電源量測和分析套件,建立可靠且可重複的電源品質、諧波、切換損失、安全工作區量測等。 5 系列 MSO 配備最多 8 個高解析度通道和多種可用的探棒,非常適合用於評估電源供應序列,以及深入分析 3 相功率轉換器。

特性

  • 電源品質和諧波
  • 切換損耗和安全工作區
  • 電路內部電感器和轉換分析
  • 多輸出效率
Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced sign...
0h 8m 3s
This vides shows how to set up automated CAN or CAN FD bus decoding, triggering, and search on the 5 Series MSO mixed signal oscilloscope.
The 5 Series MSO contains many built-in demo examples. Here are just a few of them.
Test automation may be used to check automotive Ethernet transmitters for compliance with the BroadR-Reach, 100BASE-T1 (P802.3bw), and 1000BASE-T1 (802.3bp) standards. This demonstration shows the...
0h 4m 52s
This video shows how to set up automated SENT bus (also known as SAE J2716) decoding, triggering, and search on the 5 Series MSO mixed signal oscilloscope.
See what happens when you mix a brand new oscilloscope, an apps engineer, and his composite video separator. Yes, you’ll see video on the scope display. But you’ll also learn about using 16-bit ve...
How independent time and frequency controls beat traditional FFTs.
0h 6m 19s
Learn how to quickly trigger and decode serial busses.
Watch some of the team members behind the innovative new Tektronix 5 Series MSO talk about the challenges they faced and how they overcame them.
Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms. See how visual triggers work on the 5 S...
Get a 6-minute introduction to the Fastframe segmented memory feature on the 5 Series MSO. FastFrame enables high-quality data with the efficient use of memory. Learn how to get off the ground run...
If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels,...
0h 6m 0s
This video demonstrates how to update the firmware on the 5 Series MSO.
Experience the 5 Series MSO, the scope that changes everything. 
Watch this short video to explore some of the great features of the new 5 Series MSO oscilloscope.
5m
Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering ...
0h 3m 14s
Automated measurements provide quick, precise insights with a simple drag-and-drop.
Cursors provide a quick method for making manual measurements. Here's how to use them.
Gary, Product Planner for the 5 Series MSO, gives a 5-minute demonstration of the instrument. In just a few minutes you'll learn everything you need to know to use the new touch interface. Get a...
4m 28s
The FastAcq feature provides a quick method of finding even the most elusive signal events.
101717 - 0:39
See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO oscillosco...
0h 6m 15s
Gary, Product Planner for the 5 Series MSO, gives a 5-minute demonstration of the instrument.  In just a few minutes you'll learn everything you need to know to use the new touch interface.  Get a...
4m 28s
Learn how the Wave Inspector can help you quickly set up event searches and mark all occurrences across the record.
Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC  converters or low voltage drop-out regulators (LDOs), reje...
0h 8m 55s
產品規格表 軟體套件 / 軟體選項 說明 配置與報價
檢視產品規格表 Opt. 5-CMUSB2

USB 2.0 automated pre-compliance test solution.

Contact Us
檢視產品規格表 Opt. 5-SRI3C

MIPI I3C decoding and analysis

Contact Us
檢視產品規格表 Opt. 5-CMINDUEN10

Industrial Ethernet (10Base-T1L Long reach) automated compliance test solution

Contact Us
檢視產品規格表 Opt. 5-CMENET

Ethernet (10/100/1000BASE-T) compliance test solution

Contact Us
檢視產品規格表 Opt. 5-DPM

Digital Power Management

Contact Us
檢視產品規格表 Opt. 5-SRAUTOEN1

100BASE-T1 Protocol Decode

Contact Us
檢視產品規格表 Opt. 5-SREMBD

I 2 C 與 SPI 通訊協定觸發與串列封包內容解碼

Contact Us
檢視產品規格表 Opt. 5-SRAUTO

CAN、LIN 與 FlexRay 通訊協定觸發串列封包內容解碼

Contact Us
檢視產品規格表 Opt. 5-DJA

簡化訊號完整性識別考量、抖動及其相關來源,並提供市面上即時示波器最高的靈敏度和準確度。

Contact Us
檢視產品規格表 Opt. 5-SRPM

SPMI Power Management serial triggering and analysis

Contact Us
Opt. 5-SV-RFVT

Spectrum View RF versus Time Analysis

Contact Us
檢視產品規格表 Opt. 5-AUTOEN-SS

Automotive Ethernet Signal Separation

Contact Us
檢視產品規格表 Opt. 5-SRSPACEWIRE

SpaceWire protocol decoding and analysis

Contact Us
Opt. 5-AUTOEN-BND

Automotive Ethernet Compliance, Signal Separation, PAM3 Analysis (requires
Option 5-DJA), 100BASE-T1 Serial Decode (bundle option)

Contact Us
Opt. 5-RL-125M

將記錄長度延長至 125 M 點/通道

Contact Us
檢視產品規格表 Opt. 5-SRAUTOSEN

Automotive sensor serial triggering and analysis

Contact Us
檢視產品規格表 Opt. 5-DBLVDS

Automated LVDS test solution for 5 Series MSO oscilloscopes

Contact Us
檢視產品規格表 Opt. 5-SRAUDIO

I 2 S、LJ、RJ 與 TDM 通訊協定觸發與串列封包內容解碼

Contact Us
檢視產品規格表 Opt. 5-SRENET

10BASE-T 與 100BASE-TX 通訊協定搜尋與串列封包內容解碼

Contact Us
Opt. 5-SEC

所有通訊連接埠和韌體升級的密碼保護啟用和停用功能

Contact Us
Opt. 5-RL-125M

adds 125 M record length

Contact Us
檢視產品規格表 Opt. 5-SRUSB2

USB 2.0 低速、全速與高速通訊協定觸發與串列封包內容解碼

Contact Us
檢視產品規格表 Opt. 5-CMAUTOEN

汽車乙太網路 (100Base-T1) 自動相容性測試解決方案

Contact Us
檢視產品規格表 Opt. 5-PWR

電源量測和分析

Contact Us
Opt. 5-AFG

新增內建任意/函數產生器

Contact Us
Opt. 5-SV-BW-1

Increase Spectrum View Capture Bandwidth to 500 MHz

Contact Us
Opt. 5-WIN

新增配有 Windows 10 授權的固態硬碟

Contact Us
檢視產品規格表 Opt. 5-PS2

電源解決方案套件 (5-PWR、THDP0200、TCP0030A、067-1686-XX (偏移校正治具))

Contact Us
檢視產品規格表 Opt. 5-SRCOMP

RS-232/422/485/UART 通訊協定觸發與串列封包內容解碼

Contact Us
檢視產品規格表 Opt. 5-SRAERO

航太串列觸發與分析

Contact Us
檢視產品規格表 Opt. 5-PAM3

PAM3 Analysis

Contact Us

存取數位通道

升級 說明 購買細節
TLP058 邏輯探棒 每個探棒都可透過任一 5 系列 MSO 的任何 FlexChannel 存取 8 個數位通道 索取此探棒的報價

新增儀器功能

升級 說明 購買細節
SUP5-AFG 新增任意函數產生器 索取試用授權

索取報價
SUP5-DVM 新增數位電壓計/觸發計頻器 註冊時將提供軟體升級授權檔案。
立即註冊。
SUP5-RL-125M 延長記錄長度最高達到每個通道 125 Mpts 索取試用授權

索取報價
SUP5-WIN 新增已安裝 Windows 10 授權的移動式固態硬碟。 無法試用

索取報價

新增通訊協定分析

升級 說明 購買細節
SUP5-SRAERO 航太串列觸發和分析 (MIL-STD-1553、ARINC429) 索取試用授權

索取報價
SUP5-SRAUDIO 音訊串列觸發與分析 (I2S、LJ、RJ、TDM) 索取試用授權

索取報價
SUP5-SRAUTO 汽車串列觸發與分析 (CAN、CAN FD、LIN、FlexRay) 索取試用授權

索取報價
SUP5-SRAUTOSEN 汽車感應器串列觸發與分析 (SENT) 索取試用授權

索取報價
SUP5-SRCOMP 電腦串列觸發與分析 (RS-232/422/485/UART) 索取試用授權

索取報價
SUP5-SREMBD 嵌入式串列觸發與分析 (I2C、SPI) 索取試用授權

索取報價
SUP5-SRENET 乙太網路串列觸發與分析 (10Base-T、100Base-TX) 索取試用授權

索取報價
SUP5-SRI3C MIPI I3C 解碼與分析 索取試用授權

索取報價
SUP5-SRPM 電源管理串列觸發和分析 (SPMI) 索取試用授權

索取報價
SUP5-SRUSB2 USB 2.0 串列匯流排觸發與分析 (LS、FS、HS) (針對 HS 建議採用 ≥1 GHz 型號) 索取試用授權

索取報價

新增串列相容性測試

升級 說明 購買細節
SUP5-CMAUTOEN 汽車乙太網路 (100Base-T1 和 1000BASE-T1) 自動相容性測試解決方案 索取試用授權

索取報價
SUP5-CMUSB2 USB 2.0 自動預相容性測試解決方案 索取試用授權

索取報價
SUP5-CMENET 乙太網路 (10/100/1000BASE-T) 相容性測試解決方案 索取試用授權

索取報價

新增進階分析

升級 說明 購買細節
SUP5-DJA 進階抖動和眼圖分析 索取試用授權

索取報價
SUP5-PWR 功率分析 索取試用授權

索取報價

升級頻寬

升級 說明 購買細節
SUP5-BWxTy8 將 MSO58 頻寬從 x 升級至 y,其中 x 和 y 為數百 MHz
  • 可於現場執行升級至最高 1 GHz 的選項。
  • 升級為 2 GHz 需要透過 IFC 或 IFCIN 選項於 Tektronix 維修中心進行安裝。
  • 從 350 或 500 MHz 到 1 或 2 GHz 的頻寬升級,也包含每個通道一個 TPP1000 1 GHz 被動式探棒。
SUP5-BWxTy6 將 MSO56 頻寬從 x 升級至 y,其中 x 和 y 為數百 MHz
SUP5-BWxTy4 將 MSO54 頻寬從 x 升級至 y,其中 x 和 y 為數百 MHz
低壓單端探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TAP1500 主動式探棒:1.5 GHz、10X、單端、TekVPI 配置和報價
檢視產品規格表 TAP2500 主動式探棒:2.5 GHz、10X、單端、TekVPI 配置和報價
檢視產品規格表 TAP3500

主動式探棒:3.5 GHz、10X、單端、TekVPI

配置和報價
檢視產品規格表 TAP4000 4 GHz, Single Ended Probe with TekVPI interface 配置和報價
低壓差動式探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TDP1500 差動探棒:1.5 GHz、1X/10X、+/-8.5V、TekVPI 配置和報價
檢視產品規格表 TDP3500

差動探棒:3.5 GHz、5X、+/- 2V、TekVPI

配置和報價
檢視產品規格表 TDP4000 4 GHz, Differential Probe with TekVPI interface 配置和報價
被動式探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TPP0500B

被動探棒:500 MHz、10X、TekVPI

配置和報價
檢視產品規格表 TPP0502

被動探棒:500 MHz、2X、TekVPI

配置和報價
檢視產品規格表 TPP1000

被動探棒:1 GHz、10X、TekVPI

配置和報價
邏輯分析儀探棒
產品規格表連結 探棒 說明 配置與報價
TLP058 8 通道通用邏輯探棒,適用於 5 系列示波器。 包括配件組。 配置和報價
隔離探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TIVH02

IsoVu 相互隔離差動探棒,200 MHz,TekVPI,3 公尺纜線,包含 50X(MMCX50X) 和 500X(SQPIN500X) 探棒頭

配置和報價
檢視產品規格表 TIVH02L IsoVu 相互隔離差動探棒,200 MHz,TekVPI,10 公尺纜線,包含 50X(MMCX50X) 和 500X(SQPIN500X) 探棒頭 配置和報價
檢視產品規格表 TIVH05

IsoVu 相互隔離差動探棒,500 MHz,TekVPI,3 公尺纜線,包含 50X(MMCX50X) 和 500X(SQPIN500X) 探棒頭

配置和報價
檢視產品規格表 TIVH05L

IsoVu 相互隔離差動探棒,500 MHz,TekVPI,10 公尺纜線,包含 50X(MMCX50X) 和 500X(SQPIN500X) 探棒頭

配置和報價
檢視產品規格表 TIVH08

IsoVu 相互隔離差動探棒,800 MHz,TekVPI,3 公尺纜線,包含 50X(MMCX50X) 和 500X(SQPIN500X) 探棒頭

配置和報價
檢視產品規格表 TIVH08L

IsoVu 相互隔離差動探棒,800 MHz,TekVPI,10 公尺纜線,包含 50X(MMCX50X) 和 500X(SQPIN500X) 探棒頭

配置和報價
檢視產品規格表 TIVM1 IsoVu 相互隔離差動探棒,1 GH,TekVPI,3 公尺纜線,包含 5X(IVTIP5X) 和 25X(IVTIP25X) 探棒頭 配置和報價
檢視產品規格表 TIVM1L IsoVu 相互隔離差動探棒,1 GH,TekVPI,10 公尺纜線,包含 5X(IVTIP5X) 和 25X(IVTIP25X) 探棒頭 配置和報價
電流探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TCP0020 探棒,交流/直流電流;20 Amp;50 MHz 頻寬;TekVPI 介面;可追溯校驗標準證書 配置和報價
檢視產品規格表 TCP0030A

探棒,交流/直流電流;30 Amp 直流,直流至 120 MHZ;配備 TekVPI 介面;可追溯校驗標準證書

配置和報價
檢視產品規格表 TCP0150 電流探棒:20 MHz、5 mA 至 212 A、AC/DC、TekVPI 配置和報價
電軌探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TPR1000

1 GHz,單端 TekVPI 電軌探棒搭配 TPR4KIT 標準配件組

配置和報價
檢視產品規格表 TPR4000

4 GHz,單端 TekVPI 電軌探棒搭配 TPR4KIT 標準配件組

配置和報價
高壓單端探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TPP0850

高壓探棒:800 MHz、50X、2.5 kV、單端、TekVPI

配置和報價
高壓差動式探棒
產品規格表連結 探棒 說明 配置與報價
檢視產品規格表 TDP0500 差動探棒:500 MHz、5X/50X、+/- 42V、TekVPI 配置和報價
檢視產品規格表 TDP1000

差動探棒:1 GHz、5X/50X、+/- 42V、TekVPI

配置和報價
檢視產品規格表 THDP0100 差動式探棒;100 MHZ TekVPI 差動式高壓探棒 配置和報價
檢視產品規格表 THDP0200 差動式探棒;200 MHZ TekVPI 差動式高壓探棒 配置和報價
檢視產品規格表 TMDP0200 差動式探棒;200 MHZ TekVPI 差動式中壓探棒;TMPD0200 配置和報價
5 Series MSO (MSO54, MSO56, MSO58, MSO58LP)
Specifications and Performance Verification

零件編號: 077130605
Manual 20 Jan 2020
: Can the optional AFG in the MDO3000, MDO4000C and 5 Series MSO be set to sweep?
AFG in MDO3000, MDO4000C, and 5 Series MSO do not have sweep function. But a limited sweep may be created using the arbitrary function.   Example: Create a sweep from 100 KHz to 250 KHz. ArbExpress (free software on Tek.com) select Equation Editor an
常見問答集 ID474056 15 Jan 2020
Where can I find the positive/negative pulse count auto measurement on the 5/6 Series MSO?
Currently, there is no auto measurement for the positive or negative pulse count on the 5/6 Series MSO. The workaround would be using the “Search” feature to search for the pulse width. First, set up for the positive pulse width auto measurement fo
常見問答集 ID773396 15 Jan 2020
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 MSO2000 RMD2000 DPO3
常見問答集 ID64571 15 Jan 2020
I recently registered our Tektronix oscilloscope, updated the firmware and am currently trying to activate the free DVM & Frequency Counter.  I don’t see any software downloads for activating the DVM. Am I doing something wrong, or looking in the wrong spot?
After you have registered your oscilloscope on Tek.com, you should have received an email with instructions.  The email is sent to the address you used to login to tek.com.  If you haven't received the email after registration: Check your spam folde
常見問答集 ID468046 15 Jan 2020
How many digital channels are supported on the 5 and 6 Series MSO?
Each analog channel on the 5 and 6 Series MSO can be converted into 8 digital channels with the logic probe TLP058.  For a 4-channel model (MSO54, MSO64), it is up to 32 digital channels. For a 6-channel model (MSO56), it is up to 48 digital channels
常見問答集 ID468121 15 Jan 2020
What user interface differences should I expect to see between a standard 5 or 6 Series MSO and one equipped with the optional Windows 10 operating system?
When you purchase a 5 Series MSO with the 5-WIN option or a 6 Series MSO with the 6-WIN option installed, or upgrade your 5 Series MSO with the SUP5-WIN upgrade, or upgrade your 6 Series MSO with the SUP6-WIN upgrade, you will see very few difference
常見問答集 ID235441 15 Jan 2020
Can I mount a network drive on my standard (non-Windows) 5 or 6 Series MSO? How could I use this capability?
The oscilloscope has a built-in m.2 drive, labeled C:. This drive can be used to store waveforms, setups, and measurement results. However, this drive is not easily accessible to your computer. The oscilloscope also has several USB ports to support
常見問答集 ID474191 15 Jan 2020
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check itsel
常見問答集 ID467516 15 Jan 2020
What is the deskew range and resolution between channels for the 5 or 6 series MSO?
Both 5 and 6 series MSO support a deskew range of -125ns to +125ns. The 6 series MSO can be adjusted in 1ps resolution for all acquisition modes except Peak Detect and Envelope (40ps resolution). The 5 series MSO can be adjusted in 40ps resolution fo
常見問答集 ID723961 15 Jan 2020
Where can I locate the visual trigger setup on the 5 or 6 series MSO?
The visual trigger option is not listed in the trigger type selection initially.  To setup the visual trigger, simply click on the "DRAW A BOX" icon (located in the lower right corner of the display) to draw the areas for the visual trigger.  After t
常見問答集 ID723951 15 Jan 2020
How can I invert the channel on the 5 or 6 series MSO?
With firmware v1.16, the invert function is available in the channel menu.  If the unit has the older firmware v1.14 or below, the invert channel feature on the 5 or 6 series MSO is supported via the math channel instead. Here is the setup procedure:
常見問答集 ID723956 15 Jan 2020
What optional features are available as upgrades for my 5 Series MSO and how do I get the upgrade?
Most optional, factory-installed features for the 5 Series MSO are also available as field upgrades, and are installed simply by ordering an upgrade product and entering a new, node-locked software license into the instrument. There are several gene
常見問答集 ID235421 15 Jan 2020
After I place an order for a software-license or an upgrade for my 5 or 6 Series MSO, how do I get and install the software license or the upgrade license?
After you place an order for the software license or an upgrade for your 5 or 6 Series MSO, you will receive an email (at the email address in your MyTek account). It will look about like this, but customized for you: Dear Customer ([email protected]
常見問答集 ID235451 15 Jan 2020
Can multiple auto measurements be removed at once on the 5 series MSO?
No. Currently, the user interface does not allow to remove all auto measurements at once. The closest workaround will be recalling the default setup.
常見問答集 ID474036 15 Jan 2020
Where can I locate the save on trigger feature on the 5 series MSO?
It is in the “Acquisition” badge located in the lower right corner of the screen. It allows the user to set the configuration to save the waveform file or screen capture when there is a triggered event.
常見問答集 ID474041 15 Jan 2020
Where are the controls for Roll Mode displays in my 5 and 6 Series MSO?
Roll Mode provides an instant display response when the oscilloscope is operating at very slow sweep speeds. Without it, the acquisition must complete before the display will update. With Horizontal Scale factors as slow as 1000 s/div, that can be a
常見問答集 ID235436 15 Jan 2020
How do I remotely control my 5 or 6 Series MSO from my computer, easily and without any programming?
For the standard instrument (without the Windows 10 option installed), you can simply connect your computer to the instrument through Ethernet and control the oscilloscope with your favorite browser. Find the instrument’s IP address by selecting Uti
常見問答集 ID474201 15 Jan 2020
How can I try out optional features for my 5 Series MSO before I buy them?
Most field upgrades for the optional features for the 5 Series MSO are also available for a one-time, 30-day free trial. These are available simply by requesting a trial software license and installing the node-locked license in the instrument. Ther
常見問答集 ID235426 15 Jan 2020
I saw a warning message when recalling an instrument setup on my 5 or 6 Series MSO. What caused it?
The 5 and 6 Series MSO will display a pop-up warning message when it is not completely successful recalling the saved state of the instrument with a setup or session file. The following message will appear on the display: WARNING The oscilloscope
常見問答集 ID235416 15 Jan 2020
What is the range of the logic threshold supported on the 5 and 6 Series MSO?
The logic threshold can be set between +/-40V with the TLP058 logic probe. Each individual digital channel can be set for its own threshold level.
常見問答集 ID468126 15 Jan 2020
How can I tell if my 5 Series MSO is running on Windows?
There are three indicators to look for. A Windows scope will have the Applications menu at the top center of the screen and minimize/maximize/close buttons on the top right. In addition, if you tap at the bottom of the screen, the Windows Taskbar sho
常見問答集 ID474341 15 Jan 2020
How can I ungroup the channel badge on the 5/6 Series MSO?
On firmware v1.12 or above, the 5/6 Series MSO added the stacked and overlay mode mix and match feature.  It allows user to group multiple channels for overlay mode for easy comparison. To separate the channels in the group, there are couple options
常見問答集 ID773401 15 Jan 2020
My Tektronix oscilloscope uses the Linux operating system.  Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the sour
常見問答集 ID64866 15 Jan 2020
Does my 5 or 6 Series MSO support multiple displays?
Yes, the 5 and 6 Series MSO hardware supports a total of three displays, including the instrument’s internal display. The instrument provides DVI-D, Display Port, and VGA connectors on the rear panel. The standard instrument (running the Linux operat
常見問答集 ID250721 15 Jan 2020
I get an error message “CvP Tester Didn’t Run” on my 5 Series MSO.
Instruments that have both a Linux drive and a Windows drive should have the same firmware revision on both drives. When only one drive has the latest firmware installed, the instrument user may find that firmware is not updated on the Linux drive o
常見問答集 ID771991 15 Jan 2020
Is BUS trigger mode supported in the AB sequence trigger mode on the 5 series MSO?
Yes. However, it does not apply to both events. It could be only either A or B event for the bus trigger. The second event is locked to edge trigger type.
常見問答集 ID474026 15 Jan 2020
How are 5 and 6 Series MSO setup files and session files different? How should I use them?
The 5 and 6 Series MSO setup files contain all instrument settings, user-configured analysis, and reference waveforms, so they provide an easy way to return the oscilloscope to a known state. For example, if you want to build a library of standardize
常見問答集 ID235446 15 Jan 2020
What are some of the advantages of the 5 and 6 Series MSO digital trigger?
Since its invention by Tektronix in the 1940s, the oscilloscope’s trigger system has been a key component of the products, providing a stable display of repetitive signals and the capture of specific events in a signal. At the circuit level, the trig
常見問答集 ID467411 15 Jan 2020
How do I upgrade the bandwidth of my 5 Series MSO and what do I get with the upgrade?
Bandwidth upgrades to 500 MHz and 1 GHz can be accomplished by ordering an upgrade product and entering a new software license into the instrument. The instrument bandwidth appears in the Help-> About menu near the top of the window, between the M
常見問答集 ID235431 15 Jan 2020
How do I switch between stacked and overlay display modes on the MSO5 Series?
Double click anywhere in the waveform view screen. A wave form menu will appear. Under display mode you can pick between overlay or stacked modes.  
常見問答集 ID474261 15 Jan 2020
Is e*scope supported on the 5 or 6 series MSO with Windows 10 installed?
Yes.  With firmware v1.8 or above, using the web browser access to the Windows 10 version is supported along with TightVNC.  TightVNC must be installed on both the remote PC and the scope.  For the detailed setup instructions, please see the 5/6 seri
常見問答集 ID474031 15 Jan 2020
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from th
常見問答集 ID471231 15 Jan 2020
Is it possible to establish a peer to peer ethernet connection on the 5/6 Series MSO?
Yes. To setup a peer to peer connection, you must manually configure the IP and subnet mask address on both the scope and your computer. You can then use an ethernet cable connected directly between the scope and computer.  This will work on the Linu
常見問答集 ID474351 15 Jan 2020
Could the number of analog channel be upgraded on the 5 series MSO?
No.  The analog channel count is fixed at the initial purchase.
常見問答集 ID468131 15 Jan 2020
How do I save and transfer a screenshot from the 4, 5 or 6 Series MSO oscilloscope to my PC via the remote command interface?
Screenshots (also known as hard copies) can be transferred from the Series 4, 5 and 6 MSO oscilloscopes via the remote programming interface using just a few simple commands.  For information on how to send commands to the instrument via the remote p
常見問答集 ID245436 15 Jan 2020
How do I set up a network drive on my 5 Series MSO or 6 Series MSO?
Introduction Network drives were introduced in firmware version 1.8.7 for 5 Series, 5 Series Low Profile, and 6 Series MSOs.  This feature allows you to specify a directory on another computer for the scope to use as storage.  To access this storage
常見問答集 ID773296 15 Jan 2020
What does “Probe Dynamic Range” mean and how does the 5 and 6 Series MSO indicate it?
Oscilloscope probes which contain active circuitry, especially with amplifiers in the signal path, have a limited dynamic range over which the probe behaves linearly. When input signals exceed this range, the signal may be distorted. (Such probes als
常見問答集 ID474196 15 Jan 2020
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit
常見問答集 ID474266 15 Jan 2020
Where do I start learning about oscilloscopes and Tektronix offerings?
This document covers the basics of oscilloscopes including history and general operation, in this training presentation developed by a Tektronix Applications Engineer. Learn the XYZ's of Oscilloscopes »    
常見問答集 ID778971 15 Jan 2020
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats
常見問答集 ID782291 15 Jan 2020
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such
常見問答集 ID69266 15 Jan 2020
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker
常見問答集 ID247211 15 Jan 2020
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available upd
常見問答集 ID782296 15 Jan 2020
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft,
常見問答集 ID780986 15 Jan 2020
1.5 GHz Active Probe
TAP1500 Single-ended Active FET Probe provides excellent high-speed electrical and mechanical performance required for today's digital system designs.

文件編號: 51W-19043-8
Datasheet 12 Jan 2020
5 系列 MSO

文件編號: 48T-60850-12
Datasheet 11 Jan 2020
5-CMUSB2, 6-CMUSB2 - 5 Series MSO, 6 Series MSO - V1.2.3
The Tektronix USB2.0 compliance test application (Opt. 5-CMUSB2, Opt. 6-CMUSB2) running on a 5 Series MSO and 6 Series MSO oscilloscope provides a one-button compliance testing for USB2.0 devices, hosts, and hubs. The USB software automates the compl

零件編號: 066166808
Software 27 Dec 2019
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance. The

零件編號: 066186014
Software 27 Dec 2019
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

零件編號: 066093812
Software 27 Dec 2019
Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
Spectrum View is a new way of performing spectrum analysis on an oscilloscope. This application note shows and explains how Spectrum View operates and how it differs from traditional oscilloscope FFT functions. Any analog signal may be presented as

文件編號: 48W-61563-1
應用摘要 26 Dec 2019
Solutions for Aerospace and Defense
Integrated Tektronix measurement tools for signal capture, characterization, simulation and analysis help you deliver on your promises. Learn more about our military/government solutions.

文件編號: 46A-61169-2
小冊子 26 Dec 2019
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
When comparing past, present and future automobiles, one trend is clear: cars have become data centers on wheels. Within each vehicle, the volume of data from safety systems, onboard sensors, navigation systems, and so on (and the reliance on that da

文件編號: 48W-61611-0
初階 26 Dec 2019
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply designs

文件編號: 55W-61401-2
應用摘要 26 Dec 2019
使用 FlexChannel 輸入通道進行多重匯流排系統的疑難排解
對具有多個處理器、感應器、制動器、通訊和人機介面的嵌入式系統進行疑難排解,通常需要大多數的示波器上提供超過 2 或 4 個量測通道。雖然更多的通道在一定程度上會有所助益,但是混合訊號示波器和智慧地應用數位通道將可提供更廣泛的系統可視性。本技術摘要介紹了 5系列 MSO 所提供的 FlexChannelTM 輸入通道的使用方式,以應對這些挑戰。  

文件編號: 55W-61100-2
技術簡介 26 Dec 2019
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscillo

文件編號: 55W-61093-1
應用摘要 26 Dec 2019
使用示波器進行 USB 2.0問題的疑難排解
瞭解 USB 2.0 實體層的基礎知識,協助您完成匯流排問題或系統問題的疑難排解作業。瞭解在配備 USB 2.0 匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。 

文件編號: 55W-61092-1
應用摘要 26 Dec 2019
先進雷達分析
隨著當今雷達技術快速發展,若要開發和製造高度專業的新型電子產品以檢測雷達訊號,將需要採用尖端技術和工具。本手冊介紹Tektronix任意波形產生器、即時頻譜分析儀和高頻寬示波器,這些儀器滿足了現代雷達應用要求需要的所有功能。即時檢視進階脈衝壓縮系統、生成和分析所有數位動態訊號類型,可為密集的商用電子系統創造高度可靠又經濟有效的系統設計。

文件編號: 37W-23378-4
應用摘要 26 Dec 2019
Tektronix 探棒選擇指南
Tektronix探棒可確保從您的待測裝置到示波器皆能維持最高的訊號完整性。Tektronix擁有超過100種的探棒選擇,並與 我們業界領先的示波器能完美匹配,您可為特定的測試應用找到所需要的探棒。

文件編號: 60W_14232_10
產生選擇器指南 26 Dec 2019
Tek049 ASIC Powers Next-Generation Oscilloscopes
The Tek049 is a new mixed-signal oscilloscope ASIC. It consists of 400 million transistors which make up its high-speed, precision ADCs and integrated DSP. The Tek049 recently debuted as the powerhouse behind Tek’s new 5 Series MSO and will power nex

文件編號: 55W-61320-0
白皮書 26 Dec 2019
使用 5-PWR 應用軟體執行電源供應器量測和分析
最佳化和驗證電源供應器設計需進行許多重要的量測。這些量測包括: 線路端電源品質量測,如功率因數和諧波 切換裝置量測,如切換損耗和安全工作區 輸出量測,如漣波 雖然許多量測可以手動進行,但許多工程師會在其示波器上使用自動化工具,以獲得更快速且重複性更高的結果。 本應用摘要說明了如何設定示波器進行這些量測,並著重於介紹配備 5-PWR 分析軟體的 5 系列 MSO 示波器。摘要中提供了各種量測的高階概覽、使用方式及所提供的結果等內容。

文件編號: 55W-61294-3
應用摘要 26 Dec 2019
Power Supply Converter Design Procedures
This poster offers insight into power supply converter design procedures, test stages, challenges, and solutions.

文件編號: 48W-61607-0
海報 26 Dec 2019
Probing Techniques for Accurate Voltage Measurements on Power Converters with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and covers:Choosing

文件編號: 51W-60161-3
應用摘要 26 Dec 2019
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get ti

文件編號: 51W-60171-2
應用摘要 26 Dec 2019
Measuring Digital Clock Stability and Jitter with an Oscilloscope
This application note explains how to use oscilloscope measurements to quantify the performance of any digital clock, including processor clocks and communications clocks. It briefly covers amplitude measurements and focuses on clock frequency stabil

文件編號: 48W-61379-1
應用摘要 26 Dec 2019
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply

文件編號: 46W-60010-3
應用摘要 26 Dec 2019
Automotive Ethernet: See the True Signal
As the move toward Automotive Ethernet technology in vehicles accelerates, comprehensive design validation is vital to ensure interoperability and reliable operation across multiple ECUs. This application note provides information on Automotive Ether

文件編號: 48W-61604-0
應用摘要 26 Dec 2019
Physical Layer Compliance Testing for 1000BASE-T Ethernet
Ethernet compliance testing requires precise test setups and evaluation against limits dictated by IEEE 802.3 standards.  Automated testing software for oscilloscopes greatly simplifies and speeds testing.  This application note summarizes key tests

文件編號: 48W-61620-0
應用摘要 26 Dec 2019
能將示波器量測解析度提升高於 11 位元的工具
示波器量測解析度不只取決於類比/數位轉換器是否為 8 位元、10 位元或 12 位元裝置。整個系統 (從端到端) 皆須進行最佳化處理,以減輕雜訊的影響,並改善數位解析度。本應用摘要介紹了使用 Tektronix 示波器進行高解析度量測的相關探測注意事項、HiRes 取樣模式和其他訊號處理技術。

文件編號: 48W-27802-4
應用摘要 26 Dec 2019
Innovation that drives innovation
個案研究 26 Dec 2019
使用太克被動式探棒提高量測準確度和降低成本
本應用摘要介紹太克高頻寬、低電容被動式電壓探棒如何降低示波器使用者的總擁有成本、改善效能和量測準確度及節省使用者設定時間。大多數示波器標準配備的被動式電壓探棒都提供低成本通用型探測解決方案。一般來說,這些探棒缺乏主動式電壓探棒的效能,但堅固耐用且動態範圍寬,適合查看訊號。

文件編號: 51W-26294-6
應用摘要 26 Dec 2019
使用混合訊號示波器進行數位除錯的訣竅
隨著電子產品變得更為快速複雜,其設計、驗證與除錯也變得更加困難。設計人員必須密集地驗證其設計,以確保可靠的產品運作。問題發生時,設計人員需要迅速地深入瞭解問題的根源,以解決問題。藉由同時分析類比與數位呈現的訊號,更快速找出眾多數位問題的根源,這讓混合訊號示波器 (MSO) 非常適合用來進行數位電路的驗證與除錯。

文件編號: 3GT-24008-4
應用摘要 26 Dec 2019
如何使用配備 I2C 和 SPI 解碼功能的示波器疑難排解系統問題
瞭解常見的晶片間互連 (Inter-Chip) 匯流排 (I2C 和 SPI) 的實體層基礎知識,使您可以輕鬆地完成匯流排問題或系統問題的疑難排解作業。瞭解在配備 I2C 和 SPI 匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。 

文件編號: 55W-61091-1
應用摘要 26 Dec 2019
使用任意波形/函數產生器實現真實世界訊號
太克AFG3000系列以及ArbExpress應用軟體的詳細的步驟演示

文件編號: 76W-18661-2
應用摘要 26 Dec 2019
Debugging SPMI Power Management Buses with an Oscilloscope
Designers of mobile devices and other portable systems rely on the System Power Management Interface (SPMI) protocol to monitor and dynamically control supply voltages based on real-time system demands. Enabling them to achieve lower power usage at t

文件編號: 48W-61436-0
應用摘要 26 Dec 2019
使用示波器除錯 CAN、LIN 和 FlexRay 汽車匯流排
說明常見的汽車匯流排 (CAN、LIN 和 FlexRay) 的實體層基礎知識,讓您可以輕鬆地完成匯流排問題或系統問題的疑難排解作業。瞭解在配備汽車匯流排分析功能的示波器上使用自動解碼、觸發和搜尋功能時,如何設定和解讀結果。  

文件編號: 55W-61098-3
應用摘要 26 Dec 2019
Debugging SENT Automotive Buses with an Oscilloscope
The SENT bus is used in automotive sensors to transmit high-resolution measurements to electronic control units (ECUs), usually in the powertrain. Decoding the Single Edge Nibble Transmissions (SENT) by looking at the signals can be very difficult, e

文件編號: 55W-61326-1
應用摘要 26 Dec 2019
嵌入式系統設計中的低速串列匯流排除錯
當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。

文件編號: 48W-19040-21
應用摘要 26 Dec 2019
瞭解和執行 USB 2.0 實體層測試
本應用摘要提供了 USB 2.0 實體層測試的概述,包括訊號品質、湧入電流檢查、下降和衰退的測試,以及電氣相容性測試。

文件編號: 55W-61400-0
應用摘要 26 Dec 2019
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences

文件編號: 46W-31080-7
選購指南 26 Dec 2019
對時序水平抖動的認識和鑒定
所有使用電壓轉換來顯示時序資訊的電系統,都會攜帶《時序水平抖動》這個不受歡迎的伴侶。本文主要討論電系統中的水平抖動。

文件編號: 55T-16146-5
初階 26 Dec 2019
使用 Tektronix 示波器和選配軟體提供串列支援
Tektronix 示波器提供了選配分析功能的組合,可簡化串列匯流排除錯和相容性檢驗等程序。此選型矩陣顯示每個示波器系列所支援的串列標準。

文件編號: 55W-29028-13
選購指南 26 Dec 2019
Wave Inspector® 簡化波形分析作業
現代的數位示波器可擷取大量資料,且必須在擷取後加以分析。瞭解 Tektronix 波形檢視器的瀏覽與搜尋功能,如何提供工具,讓您快速有效率地找出所要的答案。

文件編號: 48T-19039-9
應用摘要 26 Dec 2019
瞭解更多的通道如何簡化電源供應時序
大多數的系統皆會使用幾組電源軌道,而且驗證正確的電源供應器時序也需要多個示波器輸入通道。您將瞭解檢查交流/直流電源供應器的開機和關機時序的基本知識、如何查看大容量電源供應器和各種負載穩壓器,以及配備超過 4 個通道的示波器將可如何加速流程。 

文件編號: 55W-61152-0
應用摘要 26 Dec 2019
5 系列MSO混合訊號示波器升級指南
5 系列 MSO 所提供的許多功能均可現場升級,包括頻寬、記錄長度、任意/函數產生器、邏輯通道和通訊協定支援。這份 2 頁的產品規格表列出了所有在購買後可用的升級選項。  

文件編號: 55W-61103-9
規格摘要表 26 Dec 2019
Characterizing and Troubleshooting Jitter with Your Oscilloscope
Gives examples of jitter analysis, from basic analysis using frequency and Time Interval Error (TIE) measurements, to more advanced jitter decomposition techniques to help isolate the sources of jitter.  Shows examples of jitter measurements using th

文件編號: 55Z-61099-1
應用摘要 26 Dec 2019
Control Loop Analysis Kit for Power Design Stability Measurements
This document describes how the Tektronix Control Loop Analysis Kit provides a simple test setup for validating and debugging feedback loop stability.  This setup also enables engineers to test power supply rejection ratio (PSRR) on the regulator sta

文件編號: 55W-61596-0
應用綜覽 26 Dec 2019
Electronics engineering for cleaner skies
個案研究 26 Dec 2019
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes

零件編號: 077163501
Manual 26 Nov 2019
Tektronix Demo 3 Board Instruction Manual
Demo 3 Board Instruction Manual

零件編號: 071286202
Manual 26 Nov 2019
TekExpress Ethernet Compliance Solution
TekExpress Ethernet Compliance Solution

零件編號: 077150403
Manual 26 Nov 2019
TekExpress Automotive PAM3 Analysis Application
TekExpress Automotive PAM3 Analysis Application

零件編號: 077160600
Manual 26 Nov 2019
TekExpress Industrial Ethernet Compliance Solution
TekExpress Industrial Ethernet Compliance Solution

零件編號: 077162400
Manual 26 Nov 2019
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

零件編號: 077022011
Manual 26 Nov 2019
Read This First
Update your 5/6 Series MSO with the latest firmware

零件編號: 061442001
Manual 26 Nov 2019
RM5
Rackmount Kit for 5/6 Series MSO

零件編號: 071352302
Manual 26 Nov 2019
4/5/6 Series MSO Option License
Install Instructions

零件編號: 071351902
Manual 26 Nov 2019
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual

零件編號: 077130508
Manual 26 Nov 2019
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual

零件編號: 077130507
Manual 26 Nov 2019
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help

零件編號: 077130308
Manual 26 Nov 2019
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual

零件編號: 077130509
Manual 26 Nov 2019
5 Series MSO
MSO54, MSO56, MSO58 Installation and Safety

零件編號: 071351401
Manual 26 Nov 2019
5 Series MSO
MSO54, MSO56, MSO58

零件編號: 077130700
Manual 26 Nov 2019
5/6 Series MSO MSO5, MSO56, MSO58, MSO58LP, MSO64
Install Upgrade Options

零件編號: 071351901
Manual 26 Nov 2019
5/6 Series MSO Option SUP5-WIN, SUP6-WIN
SSD with Microsoft Windows 10 Upgrade Kit

零件編號: 071352401
Manual 26 Nov 2019
5/6 Series MSO With Option 5-SEC Enhanced Security
Instrument Declassification and Security Instructions

零件編號: 077140801
Manual 26 Nov 2019
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual

零件編號: 077130505
Manual 26 Nov 2019
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual

零件編號: 077130506
Manual 26 Nov 2019
Getting Started with Power Rail Measurements Application Note
No matter the industry, power integrity requirements are becoming more and more strict and the number of critical power rails in a single design is only growing. Traditional power integrity applications typically use passive probes with AC coupling o

文件編號: 51W-61562-0
應用摘要 26 Nov 2019
Next-Generation Oscilloscopes Brochure - 3 Series MDO, 4 Series MSO, 5 Series MSO, 6 Series MSO
The 3 Series MDO and 4, 5 and 6 Series MSOs offer the largest displays and the greatest user experience of any oscilloscope.  This brochure gives an overview of the platforms, with the similarities and differences between the four series.

文件編號: 48W-61573-0
小冊子 26 Nov 2019
LeCroy HDO6000A/HDO8000A Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the LeCroy HDO6000A Series and HDO8000A Series 

文件編號: 65W-61111-0
競爭優勢 26 Nov 2019
LeCroy HDO9000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the LeCroy HDO9000 Series 

文件編號: 65W-61110-0
競爭優勢 26 Nov 2019
Keysight S-Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Keysight S-Series 

文件編號: 65W-61108-0
競爭優勢 26 Nov 2019
Keysight X6000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Keysight X6000 Series 

文件編號: 65W-61109-0
競爭優勢 26 Nov 2019
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems

文件編號: 55W-61095-0
應用摘要 26 Nov 2019
4, 5 and 6 Series MSO, 5 and 6 Series Low Profile Digitizers IVI-COM Driver - V1.6.0
TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes; 5 and 6 Series Low Profile Digitizers IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI cla

零件編號: 066192807
Software 12 Nov 2019
5 Series MSO (non-Windows) Firmware - V1.14.13
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.

零件編號: 066196404
Software 12 Nov 2019
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical test specification as per Open Alliance. The

零件編號: 066186013
Software 12 Nov 2019
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance. T

零件編號: 066186012
Software 12 Nov 2019
Tektronix TekExpress LVDS Automated test solution on the 5/6 Series MSO V1.0.0.
The Tektronix TekExpress LVDS transmitter test application offers a physical layer test solution for transmitter parameter measurements and characterization.

零件編號: 066170911
Software 12 Nov 2019
TekExpress Industrial Ethernet (10BASE-T1L) Automated Compliance Solution - MSO5 and MSO6 series - V1.0.0
TekExpress Industrial Ethernet Compliance Solution - MSO 5000 and 6000The TekExpress Industrial Ethernet application (10Base-T1L) is a compliance test solution for performing transmitter electrical specification measurements and MDI return loss measu

零件編號: 066203600
Software 12 Nov 2019
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - 5 and 6 Series MSO - V1.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with fast

零件編號: 066196755
Software 12 Nov 2019
TekExpress Automotive PAM3 Analysis Solution - MSO5 and MSO6 series - V1.0.0
The Tektronix TekExpress Automotive PAM3 Analysis is an automated test solution for performing Signal Separation on a Full duplex 100BASE-T1 Automotive Ethernet signals at system level. User can perform measurements like eye height and eye width can

零件編號: 066203300
Software 12 Nov 2019
5 Series MSO (non-Windows) Firmware - V1.16.6
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.

零件編號: 066196405
Software 12 Nov 2019
5 Series MSO (non-Windows) Firmware - V1.22.4
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.

零件編號: 066196407
Software 12 Nov 2019
5 Series MSO (Windows OS) Firmware - V1.22.4
Download this firmware to install the latest updates for the 5 Series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 5-WIN (Windows 10) installed.

零件編號: 066196507
Software 12 Nov 2019
4, 5 and 6 Series Mixed Signal Oscilloscope IVI-COM Driver - V1.5.0
The TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes is an IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver

零件編號: 066192806
Software 12 Nov 2019
Troubleshooting Analog to Digital Converter Offset Using a Mixed Signal Oscilloscope
This application note gives a procedure for performing quick checks on an Analog to Digital Converter (ADC) system gain, offset and linearity.  The technique uses a ramp signal from a function generator to stimulate the system, including signal condi

文件編號: 55W-61096-0
應用摘要 12 Nov 2019
Using FastFrame Segmented Memory on the 4/5/6 Series MSO
Communications systems, RADAR, and ultrasonic sensors all rely on signals that transfer information in bursts followed by dead time. Processor interrupt pulses can occur intermittently and infrequently. Conventional signal-shot acquisitions on digita

文件編號: 55W-61299-2
技術簡介 12 Nov 2019
Rohde & Schwarz RTO2000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Rohde & Schwarz RTO2000 Series  

文件編號: 65W-61112-0
競爭優勢 12 Nov 2019
Yokogawa DLM4000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Yokogawa DLM4000 Series

文件編號: 65W-61251-0
競爭優勢 12 Nov 2019
Visual Triggers: Graphical Methods for Capturing Bursts and Other Complex Signals on Oscilloscopes
Visual triggers allow you to build triggers by thinking in terms of wave shapes. This technical brief starts by explaining how to quickly capture bursts of specific length by drawing boxes on an oscilloscope display. It then describes how to apply lo

文件編號: 48W-61452-0
技術簡介 12 Nov 2019