Calibration Service Levels

If you know the type of calibration service you need, please enter it here. If you are unsure, our customer service representatives will help you identify the correct level of calibration to meet your requirements.

Standard Calibration (ANSI/NCSL Z540.1)

Services compliant with this standard provide a calibration certificate with a calibration date and calibration due date. A traceability statement is provided. Measurement parameters not meeting the test specifications (out of tolerance) are identified and reported on the certificate.

Standard Calibration (ANSI/NCSL Z540.1) with Data

Services compliant with this standard provide a calibration certificate with a calibration date and calibration due date. A traceability statement is provided. Complete before/after measurement data is provided, listing the test name, measured value and test limits for each parameter tested during the calibration process.

17025 Calibration Service

Instrumentation is calibrated in accordance with ISO/IEC 17025 within our approved scope of accreditation. Accredited calibrations provide a certificate of calibration with the accrediting body's logo on the document. The calibration date is on the certificate; calibration due date is only placed on the document when specified by the customer or contractually agreed. A traceability statement is provided. Measurement data and uncertainty for each parameter tested during the calibration is provided.

 Certificate Options

  

Z540.1

Z540.1 w/ Data

Accredited 17025 With Uncertainties

ANSI/NCSL Z540.1 Compliant

X

X

X

ISO 9001:2008 Compliant

X

X

X

ISO/IEC 17025 Accredited Calibration

Traceable Calibration to National Standards

X

X

X

Out-of-Tolerance (OOT) Notification

X

X

X

As Found/As Left Test Data

 OOT ?

X

X

Online Electronic Certificate (DATA)

X

X

X

Online Electronic Certificate (DATA)

X

Notes:
1 - For those parameters found OOT
下載
下載

下載手冊、產品規格表、軟體等等:

Go to top