Using the Watlow F4T Controller and Keithley DAQ6510
The Keithley DAQ6510 Data Acquisition and Multimeter System can monitor the environment within a test chamber, take readings, and control the test chamber. This functionality applies the ease and intuitiveness of the DAQ6510 touch interface to a F4T thermal chamber controller, including the ability to control the chamber through easy-to-navigate GUIs. The method detailed in this document for thermal chamber control and data acquisition enables simple and straightforward operation. Because the same unit is being used for both chamber control and data acquisition, those unfamiliar with these devices only need to learn how to operate a single instrument as opposed to an entire environmental testing setup.