切換功能表
TW

目前地點

TW

選取下面的區域以變更地點:

下載
下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

DC I-V Characterization of FET-Based Biosensors Using the 4200A-SCS Parameter Analyzer

Research and development of FET-based biosensors have increased because of their low cost, rapid response, and accurate detection. A bioFET converts a biological response to an analyte into an electrical signal that can easily by measured by DC I-V instrumentation. This application note describes typical bioFETs, explains how the source measure units (SMUs) in the 4200A-SCS Parameter Analyzer are used to perform the I-V characterization of bioFETs, defines common DC I-V tests and the instruments used to make the measurements, and explains measurement considerations for optimal results.