TW

目前地點

×
TW

選取下面的區域以變更地點:

切換功能表
TW

目前地點

×
TW

選取下面的區域以變更地點:

與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電 1-800-833-9200

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

Advancing Techniques of Failure Analysis Using Source Measure Units and Lock-in Thermography

Advancing Techniques of Failure Analysis Using Source Measure Units and Lock-in Thermography
Lock-in Thermography is one technique for quickly identifying hotspots on a semiconductor device to help determine the location of a failure and continue the investigation to determine root cause.  Lock-in Thermography reduces the need for destructive testing and helps to overcome the challenges that failure analysis presents at the package level, resulting in faster time to answer, more efficient use of the failure analysis engineer’s time, and cost savings to the organization.  This application note describes how instruments like the Keithley 2601B-PULSE SourceMeter® 10 μs Pulser/SMU Instrument and a LAN/Ethernet enabled IR thermal camera minimize the challenges of integrating advanced instrumentations to conduct the measurements.