與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

PSPL5333 6 dB power divider, 25 GHz

PSPL5333 Datasheet

The products on this datasheet are no longer being sold by Tektronix.
View Tektronix Encore for reconditioned test equipment.
Check support and warranty status for these products.

線上參閱:

The PSPL5333 Power Divider is an ultra-broadband resistive coupler, which provides even division of an input signal at the output ports. The device exhibits excellent through-line insertion loss stability for frequencies from DC to >25 GHz. The PSPL5333 features good impedance match across a wide range of frequencies, with return loss typically >15 dB from 0-25 GHz. Resistors are accurate within ±2%, providing excellent input matching.

Key performance specifications
  • DC to >25 GHz
  • Excellent Return Loss
  • Superb Insertion Loss Stability
  • Accurate Amplitude and Phase Tracking

Typical performance

Frequency responses from 40 MHz to 25 GHZ, linear sweep at 5 GHz/div.

PSPL5333-Datasheet-625073-9-N

PSPL5333-Datasheet-625073-10-N

Specifications

Parameter 1 Value
Insertion Loss 6 dB, nominal DC
6.5 ±1 dB, 0-25 GHz, guaranteed
Rise time (10% - 90%) ≤15 ps
Return Loss >15 dB, 0-18 GHz, guaranteed
≥10 dB, 18-25 GHz, guaranteed
Input Impedance @ DC (port 1, 2 or 3) 50 ±1 Ω, guaranteed
Insertion Loss Asymmetry (S31- S21) ≤0.5 dB, 0-25 GHz, guaranteed
Phase Tracking (S31-S21) ≤5 deg, 0-25 GHz, guaranteed
Group Delay 198 (-8,+12) ps, 0-25 GHz, typical
Temperature Range 0-90 °C @ 1.5 W (case), linearly derated to 0 W @ 110 °C
Maximum Input Power (Avg) 1.5 W, CW
Connectors SMA jacks (f)
Warranty One Year
Mechanical dimensions

PSPL5333-Datasheet-625073-11-N


1All parameters listed are typical unless maximum/minimum guaranteed limits are provided. Measurements made with 50 Ω matched line/load at output ports.

Ordering information

Models
PSPL5333
Power Divider 6 dB