PSPL5336 -- 6 dB Power Splitter, 20 GHz, Datasheet
The PSPL5336 6 dB Power Splitter is a very broadband, resistive tee. It is useful for splitting a signal into two identical signals. The output is attenuated by 6 dB. This is an impedance-matched tee that presents a 50 Ω input impedance when both outputs are terminated in 50 Ω. Power splitter tees are built using two 50 Ω resistors and present a 50 Ω impedance only at the input port. The resistors in this tee have 1% tolerance so it has excellent symmetry and very close impedance match to 50 Ω. It has a rise time of 20 ps and bandwidth from DC to >20 GHz.
Frequency responses from 40 MHz to 20 GHz, linear sweep at 2 GHz/div.
|Rise time||≤20 ps|
|Insertion loss (-3 dB)||DC to 20 GHz|
|Insertion loss 2, DC||6.02 dB ±0.05 dB maximum|
|Insertion loss, AC||6.0 dB ±0.05 dB maximum, for f 21 plots|
|Insertion loss, Asymmetry||0.09 dB, maximum, DC
|Input impedance, DC 2||50 Ω, ±3 Ω naximum|
|S11 Return loss||See S11 plots for typical vs. frequency|
|Maximum input power, average||1 W|
|Power temperature curve||Full power up to +70 °C, linerly derated to 0 W at +125 °C|
|Peak power||50 W t|
|Connectors||SMA jacks (f)|
1 All parameters listed are typical unless maximum or minimum guaranteed limits are provided.
2 The DC specifications are based upon resistor tolerances and only when used with 50 Ω source and terminations.
- Power Splitter, 6 dB