PAM4 Transmitter Analysis

定價範圍

-

更多資訊:

線上參閱:

Features and benefits

  • Single Integrated Application for PAM4 Electrical and Optical Signal Debug and Validation
    • This application brings together all the capabilities needed for comprehensive PAM4 analysis and debug
    • Dashboard style configuration panel enables quick and easy configuration of all the necessary parameters for PAM4 analysis
  • Enhanced Clock Recovery
    • Software clock recovery offers the industry's most robust clock recovery capability even from heavily impaired signals
  • Configurable Bessel-Thomson Filter
    • Offers the flexibility to tune bandwidth of the measurement receiver, either manually or automatically, based on detected data rate
  • Waveform Filter enables embed or de-embed test fixtures or channel models
  • Auto Configuration
    • Auto detect thresholds, symbol rate, pattern type and length, enabling ease of configuration
  • Symbol and Bit Error Detector
    • Detect and navigate to individual errors with annotations of clock recovery, eye centers, and expected symbols
    • Accumulate SER and BER over multiple acquisition cycles
  • Integrated Receiver Equalization
    • Apply CTLE, FFE and DFE equalization to the acquired waveform to open a closed eye.
    • Model different types of receiver settings to perform what-if analysis
    • Support for standard based equalization presets
  • Jitter Measurement and Eye Analysis
    • Full Characterization of the PAM4 eyes to support standard based and debug analysis
    • Isolate the effects of ISI and show the potential for receiver equalization using correlated eye
    • Rise and Fall times for all 12 PAM4 transitions offers the capability to analyze each transition type in PAM4 signal providing greater insight
    • Flexible controls to automatically acquire a desired symbol population across multiple acquisitions
  • Noise Analysis and BER Contours
    • Eye width and height analysis per OIF-CEI standards or to custom BER targets
    • Eye diagram annotated to show BER contours and width/height measurement locations
  • SNDR Analysis
    • Automates a complex Electrical PAM4 transmitter measurement useful for characterization
  • TDECQ Analysis
    • Automates a complex Optical PAM4 measurement that is used to characterize the optical transmitter vertical eye closure
  • Plots and reports
    • Comprehensively interact with plots for measurement visualization and deep analysis
    • HTML report captures all the relevant setup configuration, measurement test results, and plot in single file that is easy to read and share
    • Measurement results across multiple acquisitions can be exported to a consolidated CSV file useful for additional analysis
Applications
  • Debug, Analysis, and Characterization of Electrical and Optical PAM4 signals
  • Characterization of OIF-CEI and IEEE based PAM4 standards; such as OIFCEI-VSR-56G-PAM4, 802.3bs, and CDAUI-8.

PAM4 overview

The frequency content of the NRZ signal increases linearly with bit-rate. PAM4 signaling needs half the bandwidth as NRZ for the same data rate. 400G Ethernet standards, both electrical and optical interfaces, adopted PAM4 signaling to support the forecasted growth in the datacenter and network traffic.


PAM4-Analysis-Real-Time-Datasheet


Assumes linear coding for illustration. In practice, gray coding is frequently used.

The 4 levels of PAM4 introduce additional complexity in signaling and place new demands on the test methodology. The PAM4 analysis tool offers several measurement and visualization capabilities aimed at making the task of validating PAM4 designs more efficient.

PAM4 Measurement configuration

The configuration panel is a dashboard within the PAM4 analysis tool that enables you to configure most elements for a PAM4 analysis run. The panel includes; measurement source selection, Clock recovery, Threshold, and Bessel-Thomson filter and Equalization configuration. It also has the ability to embed or de-embed a channel using a waveform filter.


PAM4-Analysis-Real-Time-Datasheet


Clock recovery

Configurable PLL (phase-locked loop) clock recovery reliably extracts the symbol clock, even with highly impaired signals, and exports the reconstructed clock waveform to a reference channel where it may be viewed.

Channel Embedding / De-embedding

The waveform filter option offers the ability to embed or de-embed different channel elements. For example:

  • The effects of a test fixture can be de-embedded to gain visibility of the signal at the transmitter output.
  • A channel can be embedded to gain visibility of the signal at the receiver input.

Equalization

It is often necessary to apply receiver equalization to open the eyes before measurements can be performed. In most cases the lack of physical access makes it impossible to verify the receiver circuit behavior and monitor the effects of clock recovery and equalization.

A comprehensive equalizer in the PAM4 analysis tool offers the ability to do the following:

  • Apply CTLE either using custom poles and zeros or standards based presets.
  • Apply configurable length FFE and / or DFE with auto-adapted tap values.
  • Observe the tap values that have been chosen.

PAM4-Analysis-Real-Time-Datasheet


Measurement Selection

The new Select panel enables you to select between electrical and optical PAM4 measurements.

The selection list allows you to choose window measurements and configure the display for ease of use and execution speed.


PAM4-Analysis-Real-Time-Datasheet


Auto Configure Capability

The PAM4 analysis application can automatically detect the signal’s symbol rate and pattern, and choose the appropriate decision thresholds based on analysis of the eye diagram. This allows quick and error-free set-up, as well as, verifying your signal’s key characteristics.

PAM4 Measurements

PAM4 analysis package provides a comprehensive set of measurements that offer greater insight into signal characteristics, speeding up validation or characterization of PAM4 designs.

The supported list includes IEEE and OIF-CEI Standards based measuments or SNDR and TDECQ when enable characterized of electical and optical PAM4 Transmitter.

PAM4 Optical Measurements
Error AnalysisSymbol Errors
SER
BER
Linearity 
JitterRj
Dj
[email protected]
Statistical Eye AnalysisVertical Eye Closure
EW6 / EW5
EH6 / EH5
Vupp / Vmid / Vlow
Hupp / Hmid / Hlow
OpticalER
OMA
AOP
IEEE SpecificTDECQ
Correlated WaveformLevel Deviation
Level Thickness
Time Deviation
Rise and Fall
PAM4 Electrical Measurements
Error AnalysisSymbol Errors
SER
BER
Linearity 
JitterRj
Dj
[email protected]
Statistical Eye AnalysisVertical Eye Closure
EW6 / EW5
EH6 / EH5
Vupp / Vmid / Vlow
Hupp / Hmid / Hlow
SNDRSNDR
Pmax
σ e
σ n
OIF-CEIUUGJ
UBHPJ
EOJ
IEEE SpecificJrms
J4
EOJ
Rise Time
Fall Time
SNR_ISI
Correlated WaveformLevel Deviation
Level Thickness
Time Deviation
Rise and Fall

Full Waveform and Correlated Waveform analysis

A full waveform analysis can be performed by overlaying all the unit intervals on the acquired PAM4 signal. A jitter analysis is done on the individual eyes within the link and the BER eye contours. Both tests can give insight into eye closure at all timing phases and reference levels simultaneously.

The correlated waveform and eye show how much additional eye opening is theoretically obtainable through equalization. The correlated waveform can be analyzed by tools and techniques similar to those found on Equivalent Time Oscilloscopes. Many performance communications standards assume access to correlated data. The PAM4 Analysis application can effectively model correlated and composite eye diagrams.


PAM4-Analysis-Real-Time-Datasheet



PAM4-Analysis-Real-Time-Datasheet


Rise and Fall Time analysis

Analysis of the individual transitions rise and fall times helps separate linear impairments (bandwidth, ISI) from nonlinear (slew-rate limiting, clipping). The rise and fall times also support advanced tuning of equalization algorithms. The PAM-4 analysis software provides the max, min, and mean rise and fall time for each of the six transition types within the PAM4 eye.


PAM4-Analysis-Real-Time-Datasheet


Visualization

A comprehensive set of plots can be used to visualize measurement data. The plots provide additional insight into the signal characteristics and are useful for debugging.

The plot toolset enables interaction with the plots and can focus in on an area of interest for closer examination and further analysis.


PAM4-Analysis-Real-Time-Datasheet


Error Detector

The PAM4 analysis tool comes with a built in error detector that can identify individual symbol errors in the current source waveform. The identified error can be viewed in a dedicated error navigator window.


PAM4-Analysis-Real-Time-Datasheet


The error navigator has several capabilities that makes it easy to quickly navigate and zoom into the error location. The additional information for the following detected errors offer help debugging symbol errors on the link:

  • Location of recovered clock
  • Location of symbol error reference thresholds
  • Expected symbol displayed
  • Actual symbol displayed

PAM4-Analysis-Real-Time-Datasheet


Comprehensive test report and data export

The measurement results can be saved in the form of a test report. The report includes; the configuration of the oscilloscope, application configuration, measurement results, and plots all available in an easy to read or share format.

The measurement results across multiple acquisitions can also be exported to a single CSV file for further analysis.


PAM4-Analysis-Real-Time-Datasheet


DPO7OE Series Optical Probes

The DPO7OE Series Optical probes can be used as an Optical Reference Receiver for high speed serial data signals (using selectable Bessel-Thomson ORR filters), or can be used as a conventional O/E converter for general wide-bandwidth optical signal acquisition. The DPO7OE Series is compatible with DPO/MSO70000 C/DX/SX models. Connected to TekConnect channels for up to 33 GHz bandwidth. Connected to ATI channels, the DPO7OE1 provides up to 42 GHz electrical response; the DPO7OE2 provides up to 59 GHz electrical bandwidth response.


PAM4-Analysis-Real-Time-Datasheet


DPO7OE1 33 GHz Optical Probe

Ordering information

The PAM4 Transmitter analysis software for Tektronix DPO/MSO70000 Win7 Series oscilloscopes

For new DPO/MSO70000 Series oscilloscopes
Product Option Description
DPO/MSO70000DX/SX PAM4 PAM4 Analysis software for electrical signals
DPO/MSO70000DX/SX PAM4-O PAM4 Analysis Software for optical signals
For users with existing DPO/DSA/MSO70000 Series oscilloscopes
Product Option Description
DPO-UP PAM4 PAM4 Analysis Software Upgrade for electrical signals
DPOFL PAM4 - PAM4 Analysis software floating license for electrical signals
DPOFT PAM4 - PAM4 Analysis software trial license for electrical signals
DPO-UP PAM4-O PAM4 Analysis Software Upgrade for optical signals
DPOFL PAM4-O - PAM4 Analysis software floating license for optical signals
DPOFT PAM4-O - PAM4 Analysis software trial license for optical signals

PAM4-Analysis-Real-Time-Datasheet

Note: PAM4 analysis software can be downloaded from www.tektronix.com. Software is enabled by a key code.
Required options
Recommended Probes
DPO7OE1
33 GHz optical probe
DPO7OE2
59 GHz optical probe
Recommended options
SDLA64

SDLA Visualizer channel de-embedding, embedding, and equalization.

Last Modified: 2018-03-12 05:00:00
下載
下載

下載手冊、產品規格表、軟體等等:

Go to top