Buffered Passive Probe

P6339A

Features & Benefits

300 V_RMS CAT II Maximum Input Voltage
8 pF Input Capacitance
10 MΩ Input Resistance
Scope Controlled Parameters
Connects to TEKPROBE™ III Interface Instruments
Compact Probe Tip Compatible with a Wide Range of Tektronix Accessories and Adapters
TEKPROBE III Interface Allows Control of Key Probe Parameters

Input Gain
AC/DC Coupling
Bandwidth Limiting
DC Offset

Applications

General Purpose
Digital Design
Power Device Characterization
Mixed Signal

Designed for TEKPROBE III, TDS794D and TDS694C

The P6339A 500 MHz Buffered Passive Probe is a revolutionary leap in probe technology. The P6339A's wide dynamic range makes it ideal for general purpose measurement applications.

To facilitate SMD probing, the P6339A comes standard with a set of SureFoot® adapters. The compact probe head/tip assembly is compatible with the full line of 3.5 mm (compact) accessories. The P6339A probe is designed exclusively for the TDS794D and TDS694C instruments.

Characteristics

Warranted Specifications

Maximum Input Voltage - 300 V_RMS CAT II.

Voltage Sensitivity - 10 mV/div to 100 V/div in a 1, 2, 5 sequence.

DC Attenuation Accuracy - ±4%.

Output Offset - ≤±5 mV.

Typical Specifications

Bandwidth - DC to 500 MHz.

Rise Time - 700 ps.

Input C - 8 pF.

Input R - 10 MΩ.

Bandwidth Limit - Selectable 20 MHz and 150 MHz.

Coupling - AC/DC, <10 Hz Cutoff.

Output Termination - TEKPROBE™ III interface/50 Ω termination.

Physical Characteristics

Probe Tip/Head Style - 3.5 mm/Compact.

Output Cable Length - 1.3 m.

Environmental Characteristics

Temperature - Operating: +10 °C to +40 °C (+50 °F to +104 °F).

Safety - UL3111-2-031, CSAS1010.2.031, EN61010-2-031, IEC61010-2-031.

Compatible Instruments

TDS794D, TDS694C.

Figure 1. P6339A input impedance.

Figure 2. P6339A input phase.

Figure 3. SMK4 Micro KlipChip™ adapter.

Figure 4. SF200A Series SureFoot® adapters.

Ordering Information

P6339A

500 MHz Buffered Passive Probe.

Includes: Adjustment tool (003-1433-02); attenuator tip cover (204-1049-00); retractable hook tip (013-0107-07); 2 ea. 50 mil, 25 mil (0.65 mm), and 0.5 mm SureFoot adapters; 2-in. ground lead (195-4240-00); 6-in. ground lead with 0.025 in. square-pin receptacle (196-3113-02); 6-in. ground lead with alligator clip (196-3305-00); SMT KlipChip adapter (206-0364-01); low inductance lead ground collar (343-1003-01); 2 ea. pairs of colored cable markers (016-0633-00); accessory pouch; instruction sheet (071-0178-01).

Service

Opt. C3 - Calibration Service 3 Years

Opt. C5 - Calibration Service 5 Years

Opt. D1 - Calibration Data Report

Opt. D3 - Calibration Data Report 3 Years (with Option C3)

Opt. D5 - Calibration Data Report 5 Years (with Option C5)

Opt. R3 - Repair Service 3 Years

Opt. R5 - Repair Service 5 Years

Recommended/Replacement Accessories

SureFoot Adapter, Orange, 50 mil (12 ea.) - Order SF201A.

SureFoot Adapter, Blue, 0.65 mm/25 mil (12 ea.) - Order SF202A.

SureFoot Adapter, Red, 0.50 mm/20 mil (12 ea.) - Order SF203A.

KlipChip Adapter (20 ea.) - Order SMG50.

Micro KlipChip Adapter (4 ea.) - Order SMK4.