類比/數位設計和除錯

當您在更動原有的時程時,您並沒有時間追蹤邏輯分析儀或通訊通訊協定分析儀來找出捉摸不定的混合訊號問題。全新的高度整合儀器設計,已針對組成現今複雜嵌入式系統的各種類比及數位訊號、串流列通訊通訊協定和射頻訊號,提供一致性的檢視功能。

資料庫

Title
XYZs of Signal Generators

This primer explains the basics of signal generators, including the types of generators, their applications and their contribution to a complete test and measurement solution.

Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope

Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying problems with setup and hold times.  Learn how to use the digital capture functions of an MSO, as well as the special setup and hold triggering feature found on most Tektronix MSOs.

Troubleshooting Ethernet Problems with your Oscilloscope

Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues.  Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscilloscope equipped with Ethernet analysis capability.

使用示波器進行 USB 2.0問題的疑難排解

Learn the basics of the USB 2.0 physical layer to troubleshoot bus problems or system issues.  Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscilloscope equipped with USB 2.0 bus analysis capability.

如何使用配備 I2C 和 SPI 解碼功能的示波器疑難排解系統問題

Learn about the physical layers of the most common interchip buses - I2C and SPI - to enable you to troubleshoot bus problems or system issues.  Learn how to set up and interpret the results when you use automated decoding, triggering, and search on an oscilloscope equipped with I2C and SPI bus analysis capability.

使用示波器除錯 CAN、LIN 和 FlexRay 汽車匯流排

Explains the physical layer basics of CAN, LIN, and FlexRay serial buses to troubleshoot bus problems or system issues.  Learn how to use automated decoding, triggering, and search on an oscilloscope equipped with automotive bus analysis capability.

Characterizing and Troubleshooting Jitter with Your Oscilloscope

Gives examples of jitter analysis, from basic analysis to more advanced jitter decomposition techniques using the 5 Series Mixed Signal Oscilloscope on unmodulated clocks, spread spectrum clocks, and serial data.

瞭解更多的通道如何簡化電源供應時序

You’ll learn the basics of checking the power-on and power-off sequence of an AC-DC power supply, how to look at a bulk supply and various point of load regulators, and how an oscilloscope with more than 4 channels can expedite the process.

使用 FlexChannel 輸入通道進行多重匯流排系統的疑難排解

Troubleshooting embedded systems often demands more than the 2 or 4 measurement channels available on most oscilloscopes.  Using a mixed signal oscilloscope and clever application of digital channels can provide much broader system visibility.  This Tech Brief specifically describes the use of FlexChannelTM inputs available on the 5 Series MSO to address these challenges.

嵌入式系統設計中的低速串列匯流排除錯

當今嵌入式系統已經無所不在。嵌入式系統可簡單定義為屬於大 型系統或機器的一部分,是一種專用的電腦系統,其目的是為該 系統或機器提供監測和控制服務。典型的嵌入式系統是從啟動時 即開始執行某些專用的應用程式,直到關閉後才會停止。當前設 計和製造的所有電子裝置,均屬於嵌入式系統。

Tektronix Encore is passionate about bringing you reconditioned products that…

1:26

The AWG4000 is a 3-in-1 waveform generator, combining the functions of a AFG, an…

7:10

Enjoy the flexibility to perform analysis tasks including timing, eye and jitter…

1:31
下載
下載

下載手冊、產品規格表、軟體等等:

Go to top